DF6FABAZ - Dishwasher SMEG - Free user manual and instructions
Find the device manual for free DF6FABAZ SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Smeg |
| Model | DF6FABAZ |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | Approx. 45 kg |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 270 kWh |
| Annual Water Consumption | 2800 L |
| Number of Place Settings | 14 |
| Noise Level | 44 dB(A) |
| Number of Programs | 8 |
| Programs | Eco, Auto, Intensive, Normal, Delicate, Quick 30', Soak, Self-Clean |
| Drying System | Condensation drying |
| Water Connection | Cold water only |
| Power Supply | 220-240 V, 50 Hz |
| Current | 10 A |
| Salt and Rinse Aid Indicator | Yes |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Interior Light | Yes |
| Cutlery Basket | Yes, removable |
| Height Adjustable Upper Basket | Yes |
| Wash System | Inverter motor with variable speed |
Frequently Asked Questions - DF6FABAZ SMEG
How do I properly install the dishwasher?
Ensure the dishwasher is placed on a level floor. Connect the water inlet hose to a cold water supply with a 3/4 inch threaded tap. The drain hose must be properly secured to a sink drain or standpipe. Electrical connection must be carried out by a qualified professional.
How often should I add salt and rinse aid?
Salt should be added when the salt indicator lights up. Rinse aid should be refilled when the rinse aid indicator is visible. Typically, salt lasts for several cycles depending on water hardness.
What do the error codes mean?
Common error codes: E1 - water supply issue, E2 - drainage problem, E3 - heating failure, E4 - water overflow. Refer to the user manual for detailed descriptions and troubleshooting steps.
How can I clean the dishwasher filters?
Remove the lower rack and unscrew the filter assembly. Rinse under running water and use a soft brush to remove debris. Reassemble and ensure it is properly locked. Clean filters monthly for optimal performance.
Can I use regular dish soap instead of dishwasher detergent?
No, regular dish soap will cause excessive suds and may damage the machine. Only use specifically formulated dishwasher detergent (powder, gel, or tablets).
What is the most efficient program for daily use?
The Eco program is designed for energy and water efficiency. It uses a longer wash cycle but consumes less resources. It is ideal for normally soiled dishes.
How do I start a delayed wash?
Press the Delay Start button repeatedly to set the desired delay (1-24 hours). Then select a program and press Start. The dishwasher will begin after the set delay.
What should I do if the dishes are not drying properly?
Check if rinse aid is filled. Ensure you are using a program with drying function. Avoid overloading and ensure proper ventilation. If condensation drying is insufficient, select a program with higher temperature rinse.
Is it normal for the dishwasher to make noise?
Some noise is normal: water spray, motor hum, and drain pump. If you hear grinding or banging, check for obstructions in the spray arms or pump filter. The machine should be level.
How do I reset the dishwasher?
Press and hold the Start/Reset button for about 3 seconds to cancel a running program. To perform a full reset, disconnect power for 1 minute, then reconnect. This clears most temporary faults.
User questions about DF6FABAZ SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DF6FABAZ - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DF6FABAZ by SMEG.