eServer BladeCenter HX5 - Server IBM - Free user manual and instructions
Find the device manual for free eServer BladeCenter HX5 IBM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Blade Server |
| Brand | IBM |
| Model | eServer BladeCenter HX5 |
| Form Factor | Blade (Half-height, single-wide) |
| Dimensions (H x W x D) | 1.7 in x 9.5 in x 24.0 in (4.3 cm x 24.1 cm x 61.0 cm) |
| Weight | Approximately 6.8 kg (15.0 lb) |
| Processor | Intel Xeon 5600/5500 series (up to 2) |
| Memory | Up to 128 GB DDR3 ECC (12 DIMM slots) |
| Storage | Up to 2 hot-swap SFF SAS/SSD drives |
| Network | Dual 10 GbE embedded, optional mezzanine |
| Power Consumption | 300 W typical (varies with configuration) |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Key Features | High-density computing, hot-swap drives, redundant failover |
| Maintenance | LED diagnostics, hot-swap components, remote management |
| Safety Compliances | UL, CSA, CE, FCC, RoHS |
| Spare Parts | Memory modules, processors, mezzanine cards, hard drives |
| Repairability | Field-replaceable units (FRUs) with minimal tools |
| Warranty | 3-year limited, 9x5 next-business-day |
| Compatibility | BladeCenter S, H, E, and HT chassis |
| Operating Systems Supported | Windows Server, Red Hat, SUSE, VMware, Citrix |
Frequently Asked Questions - eServer BladeCenter HX5 IBM
How do I install the blade into the chassis?
Slide the blade into the guide rails and push until it locks. Ensure the release levers are fully closed.
What is the maximum memory supported?
Up to 128 GB using 16 GB DDR3 DIMMs. Use only IBM-approved memory.
Can I mix processor types?
No, both processors must be of same QPI speed and core count. Mixing may cause instability.
How do I access the remote management console?
Use the IBM BladeCenter Management Module via the chassis IP. Default credentials are in the manual.
What drives are supported?
Supports 2.5-inch SAS or SSD hot-swap drives. SATA drives are not compatible.
How to reset the service processor?
Press and hold the Reset button on the front panel for 10 seconds. The LED will blink amber.
What is the power requirement for this blade?
The blade draws up to 300 W; ensure the chassis has sufficient power capacity.
How do I update the firmware?
Download the latest UEFI and IMM firmware from IBM support, then update via the management module.
Can I use this blade with a BladeCenter S chassis?
Yes, the HX5 is compatible with BladeCenter S, H, E, and HT chassis.
What do the front panel LEDs mean?
Green = normal operation, Amber = warning, Red = critical fault. Refer to the LED legend on the blade cover.
User questions about eServer BladeCenter HX5 IBM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual eServer BladeCenter HX5 - IBM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. eServer BladeCenter HX5 by IBM.