Park Right - Parking mat Maxsa - Free user manual and instructions

Product Type	Parking Mat
Brand	Maxsa
Model	Park Right
Dimensions	Approx. 68 cm x 43 cm x 2.5 cm (27 in x 17 in x 1 in)
Weight	Approx. 1.5 kg (3.3 lbs)
Material	Rubber/Plastic
Color	Black
Power Source	None (manual)
Main Function	Provides visual and tactile guide for safe parking
Installation	Peel and stick adhesive backing on clean, dry surface
Usage Warning	Drive slowly on and off to prevent mat movement
Surface Compatibility	Suitable for smooth, clean pavement or garage floor
Included Accessories	One parking mat with adhesive strip
Warranty	90-day limited warranty
Country of Origin	Taiwan
Manufacturer	MAXSA Innovations
Contact	Tel: [phone] / www.maxsainnovations.com
Care Instructions	Clean with mild soap and water; avoid harsh chemicals
Storage	Store flat in dry place
Safety Notes	Do not exceed vehicle weight capacity (if specified) – check product

Frequently Asked Questions - Park Right Maxsa

How do I install the Park Right mat?

First, park your vehicle in the desired position and mark the tire location. Remove the vehicle, position the mat so the tire sits between the two bumps, mark the mat position, clean the floor, peel off the adhesive backing, and press firmly into place.

Can the mat be used on carpet?

The mat is designed for smooth, clean pavement or concrete floors. Using on carpet may not provide adequate adhesion and could cause the mat to shift.

How do I clean the parking mat?

Clean the mat with mild soap and water. Avoid using harsh chemicals or abrasive cleaners that could damage the surface.

Will the mat move when I drive over it?

The mat can move if driven onto too quickly. Always drive slowly on and off the mat to prevent movement. The adhesive helps hold it in place.

Is the mat suitable for all vehicle types?

The mat is designed for standard passenger vehicles. For heavy trucks or SUVs, check the weight capacity. The manufacturer does not specify a maximum weight, but exercise caution.

What is the warranty period?

The Maxsa Park Right mat comes with a 90-day limited warranty from the date of purchase.

Can I remove and reposition the mat after installation?

Once the adhesive is applied, repositioning may be difficult. It is recommended to finalize the position before removing the backing. If needed, carefully peel off and clean residue.

Does the mat leave residue on the floor?

The adhesive may leave some residue if removed. You can clean it with a mild solvent or adhesive remover.

How do I know where to place the mat?

Park your vehicle exactly where you want it, mark the tire position on the floor, then place the mat so the tire sits in the center between the two bumps. Adjust as needed.

What should I do if the mat does not stay in place?

Ensure the floor is clean and dry before installation. If the mat still moves, try applying extra adhesive or double-sided tape. Contact MAXSA Innovations for further assistance.

USER MANUAL Park Right Maxsa

Helps You Park Safely and Easily.

CAUTION: Mat can move.

Always drive on and off the mat

slowly to prevent mat movement.

INSTALLATION INSTRUCTIONS

Park vehicle carefully in desired position.
Mark the position of the tire on the floor/pavement for the tire that will be on the mat.
Remove vehicle.
Using the tire marks, position the mat so that the tire will be in the center of the mat between the two bumps. Mark the mat position.
Make sure the floor/pavement is clean and free of oil.
Remove backing from adhesive strip on bottom of mat. Place mat in position and press down firmly.

90 DAY LIMITED WARRANTY

MAXSA Innovations

8412 Cathedral Forest Drive

Fairfax Station, VA 22039

Tel: [phone]

www.maxsainnovations.com

MADE IN TAIWAN exclusively for MAXSA Innovations

v5.2

©2005 MAXSA Innovations, LLC