Maxsa

44449-L - Motion detector Maxsa - Free user manual and instructions

Find the device manual for free 44449-L Maxsa in PDF.

📄 8 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Maxsa 44449-L - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Motion Detector
Brand Maxsa
Model 44449-L
Power Source Battery-operated (typically 2-4 AA or 9V)
Detection Technology Passive Infrared (PIR)
Detection Range Up to 30 feet (9 meters)
Detection Angle 120 degrees
Mounting Type Wall or ceiling mount
Operating Temperature 32°F to 104°F (0°C to 40°C)
Dimensions (approx.) 3.5 x 2.5 x 1.5 inches (89 x 64 x 38 mm)
Weight (without batteries) 3.2 oz (91 g)
Main Functions Motion detection, alarm trigger, dusk-to-dawn operation
Alarm Type Audible (typically 120 dB or similar)
Installation Simple, no wiring required
Maintenance Wipe with dry cloth; clean lens periodically
Safety Contains small parts, keep away from children
Spare Parts & Repairability Batteries replaceable; no user-serviceable parts
Battery Life Up to 1 year under normal use
Warranty 1 year limited warranty

Frequently Asked Questions - 44449-L Maxsa

How do I install the Maxsa 44449-L motion detector?
Mount the detector on a wall or ceiling using the included screws and anchors. Ensure the sensor has a clear line of sight to the area you want to monitor. Insert batteries (not included) and adjust the sensitivity and timer settings as needed. Refer to the manual for detailed steps.
What batteries does the 44449-L require?
The device typically requires 2-4 AA batteries or a 9V battery. Check the battery compartment for the exact number and type recommended by the manufacturer.
How do I adjust the sensitivity of the motion detector?
Locate the sensitivity adjustment dial or switch on the device. Turn it to increase or decrease the detection range. Higher sensitivity may cause more false alarms from pets or passing cars.
What does the dusk-to-dawn feature do?
The dusk-to-dawn feature enables the detector to activate only during low-light conditions (nighttime). During daylight, it remains inactive to save battery and avoid false triggers.
Why is my motion detector beeping randomly?
Random beeping may indicate low batteries or a false alarm from pets, moving branches, or temperature changes. Replace batteries first, then check the sensor's position and sensitivity settings.
Can I use this detector outdoors?
The 44449-L is designed for indoor use only. Exposure to rain or direct sunlight may damage the device. For outdoor use, consider a weatherproof model.
How do I reset the motion detector?
Remove the batteries, wait 30 seconds, then reinsert them. If the device has a reset button, press and hold it for 5 seconds. This clears any saved settings.
What is the detection range and angle?
The detection range is up to 30 feet (9 meters) and the detection angle is 120 degrees. For best performance, mount it 6-8 feet above the floor.
How do I clean and maintain the motion detector?
Wipe the exterior with a soft, dry cloth. Do not use water or cleaning chemicals. Periodically clean the sensor lens with a cotton swab to remove dust and cobwebs.
What should I do if the alarm does not sound when motion is detected?
First, ensure the batteries are fresh and properly installed. Check that the sensitivity is set high enough and the sensor is not obstructed. If the issue persists, test the unit by walking in front of it. Replace the unit if it still fails.

User questions about 44449-L Maxsa

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Motion detector in PDF format for free! Find your manual 44449-L - Maxsa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 44449-L by Maxsa.

USER MANUAL 44449-L Maxsa

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Maxsa

Model : 44449-L

Category : Motion detector