ARIEL CM-3202 - Security Camera FLIR - Free user manual and instructions
Find the device manual for free ARIEL CM-3202 FLIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Security camera |
| Brand | FLIR |
| Model | ARIEL CM-3202 |
| Camera type | Bullet |
| Dimensions (L x W x H) | 180 x 70 x 70 mm |
| Weight | 350 g |
| Power supply | 12 V DC via power adapter (included) |
| Power consumption | 5 W max |
| Resolution | 1920 x 1080 pixels (Full HD) |
| Night vision | Yes, up to 20 m with infrared LED |
| Viewing angle | 70° horizontal |
| Motion detection | Yes, built-in |
| Protection rating | IP66 (weather-resistant) |
| Connectivity | RJ45 Ethernet (PoE) and BNC video output |
| Storage | NVR or SD card (not included) |
| Main features | HD surveillance, night vision, motion detection, ONVIF compatible |
| Operating temperature | -20 °C to 50 °C |
| Maintenance and cleaning | Clean the lens with a dry microfiber cloth; avoid solvents |
| Security | Robust mounting, security cable available, firmware update recommended |
| Spare parts and repairability | Adapter, Ethernet cable, mounting bracket available; repair by authorized center |
| General information | 2-year warranty, indoor/outdoor use, CE certification |
Frequently Asked Questions - ARIEL CM-3202 FLIR
How to reset the ARIEL CM-3202 camera?
Hold down the RESET button on the back of the camera for 10 seconds using a paperclip. Factory settings will be restored.
How to connect the camera to an NVR recorder?
Connect the camera via an Ethernet cable to a PoE port on your NVR. The IP address will be assigned automatically. Use the NVR software to add the camera.
Night vision is not working, what to do?
Check that the infrared LEDs are not obstructed. Make sure night mode is enabled in the settings. If the problem persists, contact FLIR support.
Can I use the camera without an NVR?
Yes, you can view the video stream directly on a screen via the BNC output, but recording requires an NVR or an SD card (if the camera has a slot).
What is the range of motion detection?
Motion detection can be configured from 1 to 20 meters depending on sensitivity settings and the monitored area.
How to access the camera remotely?
Set up port forwarding on your router for port 80 or use a DDNS service. The FLIR Cloud app (iOS/Android) allows secure access via the internet.
Is the camera weather-resistant?
Yes, it has an IP66 rating, protecting it against water splashes and dust. It can be installed outdoors.
What type of Ethernet cable to use?
Use a category 5e or 6 Ethernet cable, shielded (STP) for better protection against interference, especially outdoors.
How to clean the camera lens?
Use a soft, lint-free cloth slightly dampened (distilled water) to gently wipe the lens. Never use chemicals.
What to do if the image is blurry?
Check the lens focus (if adjustable) by turning the ring. Clean the lens. Make sure the resolution is set to 1080p in the settings.
User questions about ARIEL CM-3202 FLIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual ARIEL CM-3202 - FLIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARIEL CM-3202 by FLIR.