ISB1400 - Hi-Fi System iLive - Free user manual and instructions

Brand	iLive
Model	ISB1400
Product Type	Bluetooth Bookshelf Speakers (Hi-Fi System)
Bluetooth Version	5.0
Audio Inputs	Aux In (RCA stereo), Line In (3.5mm)
Remote Control	Yes, with pre-installed CR2025 battery
Included Accessories	AC power adapter, RCA cable, speaker connection wire
Power Source	AC adapter (included)
Indicator LEDs	Blue (Bluetooth), Green (Line In), White (Aux)
Voice Prompt	Announces "Bluetooth is connected"
Speaker Connection	Wired between left and right speakers using included cable
Cleaning Instructions	Use only a dry cloth
Safety Compliance	FCC Part 15 Class B, double insulation
Contact Information	Phone: [phone], Website: www.iLiveElectronics.com

Frequently Asked Questions - ISB1400 iLive

How do I pair my Bluetooth device with the iLive ISB1400 speakers?

When the speakers first power on, they default to Bluetooth mode and are ready to pair. Ensure you are within 3 feet of the Bluetooth device. On your device, go to Bluetooth settings and select ISB1400. When paired successfully, a voice will announce 'Bluetooth is connected'.

Can I connect the speakers to my TV?

Yes, you can connect the speakers to your TV using either the RCA Aux input (using the included RCA cable) or the 3.5mm Line In input (cable not included). Press the Aux or Line In button on the back of the speaker or remote to select the corresponding mode.

How do I switch between Bluetooth, Aux, and Line In modes?

Use the buttons on the back of the speaker: press Bluetooth (indicated by a Bluetooth icon) for Bluetooth mode (blue LED), Aux for Aux mode (white LED), and Line In for Line In mode (green LED). The remote also has dedicated buttons for each mode.

What should I do if the speakers do not power on?

Ensure the AC power adapter is securely connected to both the speaker and a working electrical outlet. Press the Power button on the back of the speaker. If it still does not power on, try a different outlet or contact support.

How do I clean the speakers?

Use only a dry cloth to clean the exterior. Do not use any liquids or cleaners, and avoid getting moisture near the speakers.

Is the remote control battery included?

Yes, the remote control comes with a CR2025 battery pre-installed. If the remote stops working, replace with a new CR2025 battery, taking care to observe correct polarity.

How do I connect the speakers to each other?

Use the included speaker connection wire. Match the colored wires to the same color-coded ports on the back of each speaker. Secure the connection properly.

Can I use the speakers while charging?

The speakers are not battery-powered; they must be connected to AC power to function. They are designed to be used while plugged in.

What does the blinking blue LED mean?

A blinking blue LED indicates the speakers are in Bluetooth pairing mode. When pairing is successful, the LED turns solid blue. If it continues blinking, ensure your device is within range and try pairing again.

Where can I find the user manual and warranty information?

The latest user manual and warranty details are available at www.iLiveElectronics.com. You can also contact support by phone at 1-888-999-4215 or email [e-mail].

USER MANUAL ISB1400 iLive

Two black 3D-rendered audio speakers with sound waves, connected by a cable (no text or symbols visible)

Bluetooth Bookshelf Speakers

User's Guide for Model ISB1400 v2623-01

For the most up-to-date version of this User's Guide, go to www.iliveelectronics.com

Information & Safety Instructions

Important Safety Instructions

• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.

- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

- Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long periods of time.

- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

FCC Warnings

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Battery Warnings

• WARNING: Do not ingest the battery, Chemical Burn Hazard.
• If the remote control supplied with this product contains a coin/button cell battery and the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside and part of the body, seek immediate medical attention.
• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not mix old and new batteries.
• Completely replace all old batteries with new ones.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and local guidelines.

Additional Warnings and Precautions

- CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

- Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.

- CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

- WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

- WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.

- WARNING: Shock hazard - Do Not Open.

- Caution and marking information is located at the rear or bottom of the apparatus.

- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.

- Objects filled with liquids, such as vases, shall not be placed on the apparatus.

WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.

WARNING : This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations.

Get to Know Your Speakers

Features

• Supports Bluetooth 5.0
- Aux In (RCA stereo input)
• Line In (3.5mm audio input)

What's in the Box?

• Speakers
• Remote Control with pre-installed CR2025 battery
  • AC power adapter with cable
• RCA cable
• Speaker connection wire

Get to Know Your Speakers

Front

Rear

1. Source Mode Indicator LED
2. Remote Sensor
3. Speaker Controls
4. Speaker Inputs
5. Speaker to Speaker Connection (L/R)

Controls

graph TD
    A["POWER"] --> B["12"]
    C["LINE IN"] --> D["●"]
    E["AUX"] --> F["●"]
    G["×"] --> H["●"]
    I["PAIR"] --> J["●"]
    K["- VOLUME +"] --> L["●"]

1. Power: Press to power ON. Press and hold to power OFF.
2. Line In: Press to select Line In Mode, indicated by a green LED on the front of the speaker.

3. Aux: Press to select Aux Mode, indicated by a white LED on the front of the speaker.

4. Dress to select Bluetooth Mode, indicated by a blue LED on the front of the speaker.

5. Pair: Press to begin Bluetooth pairing. The indicator on the front of the speaker will flash quickly while pairing, then turn solid when successfully paired.
6. Volume -/+: Press to adjust the volume level of the speakers.

Get to Know Your Speakers

Remote

Let's Get Started

Connect Your Speakers

Connect the speakers using the included speaker cable. Match the colored wires to the same color-coded ports. 

Power On Your Speaker

- Plug the power adapter into the DC power input on the speaker and a standard outlet. - Press the Power button to turn the speakers ON. 

Connecting to a Bluetooth Speaker

- When the speakers first power ON they default to Bluetooth Mode and are ready to pair automatically. When pairing, remain within 3 feet of the Bluetooth device. - Using the controls on your Bluetooth device, select ISB1400 in the Bluetooth Settings to pair. If need be, refer to the user's manual for your specific device for more information. - When successfully paired, a voice will announce, "Bluetooth is connected." You will now hear audio from your Bluetooth device through the speakers. - Use the controls on the connected Bluetooth device to select and play audio.

Connecting to External Audio Sources

RCA Connection

- You can connect the speakers to an audio system using an RCA stereo audio cable (included). Just connect the color-coded ports on the speaker to the same ports on your audio device. - Next, press the Aux button on the back of the speaker or press the Aux Mode button on the remote 

3.5mm Audio Cable Connection

- You can also connect the speakers using a 3.5mm audio cable (not included). Just connect the Line In on the speakers to the headphone jack on your audio device. - Next, press the Line In button on the back of the speaker or press the Line In button on the remote 

Company Information

Contact Information Website: www.iLiveElectronics.com Email Support: [e-mail] Email Parts: [e-mail] Phone Support: 1-888-999-4215 Warranty For Warranty Information and the most up-to-date version of this User's Guide, go to: www.iLiveElectronics.com

International Support

To download this User's Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d'assistance sur: www.iLiveElectronics.com 

Protect for Today Sustain for Tomorrow

Copyright © 2020 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.