NS-RMTVIZ21 - Remote control INSIGNIA - Free user manual and instructions

Product Type	Replacement Remote Control
Brand	Insignia
Model	NS-RMTVIZ21
Compatible Devices	Vizio TVs
Power Source	2 AAA batteries (not included)
Battery Life	Approximately 6 months (typical use)
Connectivity	Infrared (IR)
Range	Up to 30 feet (9 meters)
Learning Function	Yes, can learn commands from original remote
Code Search	Yes, automatic code search
Buttons	Power, volume, channel, directional pad, menu, color buttons (yellow, green, blue, red)
Dimensions	Approximately 8.5 x 2 x 0.8 inches (21.6 x 5.1 x 2 cm)
Weight	Approximately 3.5 oz (99 g) with batteries
Material	Plastic
Warranty	1 year limited
Manufacturer	Insignia (Best Buy)
Maintenance	Wipe with dry cloth; remove batteries if not used for long periods
Safety	Contains small parts; keep away from children; complies with FCC regulations
Spare Parts / Accessories	Replacement AAA batteries; no other spare parts available

Frequently Asked Questions - NS-RMTVIZ21 INSIGNIA

How do I set up the remote for my Vizio TV?

Install two AAA batteries and test the remote. If buttons do not work, press and hold the yellow and green buttons until the power button blinks twice, then press and hold Power to search for the correct code. Release when the TV turns off.

What should I do if the remote doesn't work after installing batteries?

Ensure the TV is on and not in standby. Then perform a code search by pressing and holding yellow and green buttons until the power button blinks twice, then press and hold Power. Release when the TV turns off.

How do I use the learning function?

Place the new remote and original remote 1-2 inches apart with IR eyes facing. Press and hold blue and red buttons until power blinks twice, press 975, then press the button to learn, then press the corresponding button on the original remote. Power blinks twice if successful.

How do I delete a learned function?

Press and hold blue and red buttons until power blinks twice, press 976, then press the button you want to reset twice. The power button blinks twice, and the button returns to its original function.

Why does the power button not blink when I press a button?

This typically indicates dead batteries. Replace them with two new AAA batteries and try again.

How do I perform a code search for my TV?

With the TV on, press and hold the yellow and green buttons until the power button blinks twice. Then press and hold Power while pointing at the TV. Release when the TV turns off. The remote will then work with that code.

Is this remote compatible with all Vizio TVs?

Yes, the NS-RMTVIZ21 is designed for any Vizio TV. For newer models, it should work without setup. For older models, use the code search or learning function.

How do I reset the remote to factory settings?

To reset a learned button, use the delete learned function (press blue+red, 976, then the button twice). To clear all learned functions, you may need to remove batteries for a few minutes, but there is no master reset described in the manual.

What batteries are needed? Are they included?

The remote requires two AAA batteries. Batteries are not included in the package.

How do I contact Insignia support?

Call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico). Visit www.insigniaproducts.com for more information.

USER MANUAL NS-RMTVIZ21 INSIGNIA

QUICK SETUP GUIDE Replacement Remote

For Vizio TVs NS-RMTVIZ21

PACKAGE CONTENTS

- Replacement Remote - Quick Setup Guide

INSTALLING BATTERIES Insert two AAA batteries (not included) into the remote. Make sure that the + and - symbols match the + and - symbols in the battery compartment. Note: To set up your remote, follow the setup steps, in order, and stop as soon as your remote works correctly.

SETTING UP YOUR REMOTE

Your remote is compatible with any Vizio TV and should work with newer Vizio TVs without requiring any setup. Vizio Smart TV functionality usually works via the menu buttons. After you install the batteries, test your remote. If the buttons work correctly, your remote is ready to use.

If the buttons do not work, complete the following steps:

1 Make sure that your TV is on and not in standby mode. 2 On your remote, press and hold the yellow and green buttons until the power button blinks twice.

3 Point your remote towards the TV, then press and hold power (©).

4 As soon as your TV turns off, immediately release the button. The power button blinks twice. You have three seconds to release the button before your remote sends a different signal (code) to your TV.
5 Use your remote to turn on your TV, then test the other buttons. If all of the buttons work, your remote is ready to use.

If some of the buttons still do not work, complete the following steps:

1 Make sure that your TV is on and not in standby mode.
2 On your remote, press and hold the yellow and green buttons until the power button blinks twice.

3 Point your remote towards your TV, then press and hold one of the buttons (such as MENU) that is not working correctly.
4 As soon as the correct function (in this example, MENU) appears on your TV screen, immediately release the button. The power button blinks twice. You have three seconds to release the button before your remote sends a different signal (code) to your TV.
5 Test the rest of the buttons. If all of the buttons work, your remote is ready to use.
6 If some of the buttons still do not work, repeat the above steps for another non-working button, then test the rest of the buttons. Repeat until all the buttons work.

Your remote can learn any function from your original remote as long as the original remote works.
1 Place both remotes on a flat surface with the infrared eyes facing each other. Note: If you have difficulty with the learning function, install new batteries in both remotes and try the process again. Make sure that the remote control "eyes" are pointing at each other and are 1–2 inches (2.5–5 cm) apart.

New remote

Original remote

2 On your new remote, press and hold the blue and red buttons until the power button blinks twice.

Before using your new product, please read these instructions to prevent any damage.

3 On your new remote, press 975. The power button blinks twice.

4 On your new remote, press the button you want to learn a new function (for example, VOL+).

5 On the original remote control, press the button with the function you want to teach to the button you pressed in Step 4. Notes:

• If the power button blinks twice.

your new remote learned the function. You can repeat steps 4 and 5 to add another function to your new remote.

- If the power button blinks one long blink, your new remote did not learn the function. Repeat steps 4 and 5.

6 After you teach your new remote all the functions you want it to learn, press and hold OK for three seconds until the power button blinks twice.

DELETING A LEARNED FUNCTION

1 Press and hold the blue and red buttons until the power button blinks twice.

2 Press 976.

3 Press the button you want to reset twice (for example, VOL+). The power button blinks twice and the button is reset to its original function.

TROUBLESHOOTING

Power button does not blink when a button is pressed. Replace the batteries.

LEGAL NOTICES

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Recorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada)

01-800-926-3000 (Mexico)

www.insignlaproducts.com

© 2020 VIZIO, Inc. VZIO, the V Logo, VIZIO SmartCast and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc. All other trademarks are property of their respective owners. All rights reserved.

INSIGNA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richmond, MN 55423 U.S.A. ©2020 Best Buy. All rights reserved.

V ENGLISH 20015