AWH1028 - Water heater PHILIPS - Free user manual and instructions

Product Type	Electric Water Heater
Model	AWH1028
Brand	Philips
Capacity	15 liters
Power Consumption	1500 W
Voltage	220-240 V / 50 Hz
Temperature Range	30 °C to 75 °C
Dimensions (HxWxD)	500 x 350 x 350 mm
Net Weight	5.5 kg
Water Tank Material	Stainless steel
Heating Element	Copper
Safety Equipment	Pressure relief valve, thermal cut-off
Insulation	Polyurethane foam
Installation Mode	Wall-mounted
Energy Efficiency Class	B
Maximum Water Pressure	0.6 MPa
Included Accessories	Mounting brackets, safety valve, instruction manual
Maintenance	Descale every 6 months; replace anode as needed
Repairability Index	6.5 / 10

Frequently Asked Questions - AWH1028 PHILIPS

How do I install the Philips AWH1028 water heater?

The installation must be performed by a qualified professional. Ensure the wall can support the weight, connect to a dedicated power supply, and follow the steps in the user manual.

What is the recommended temperature setting for the water heater?

For optimal energy efficiency and safety, set the thermostat between 55°C and 60°C. This prevents scalding and reduces scale buildup.

How do I clean and maintain the water heater?

Regularly check the pressure relief valve and descale the tank every 6 months using a descaling solution. Also inspect the sacrificial anode annually.

What should I do if the water heater does not heat water?

First, check if the power supply is on and the tripped circuit breaker. If still not heating, the heating element or thermostat may be faulty; contact customer support.

Is the Philips AWH1028 safe to leave on overnight?

Yes, it is equipped with a thermostat and thermal cut-off for safety. However, for energy savings, consider using a timer to heat only when needed.

How long does it take to heat the water?

With a 1500 W element and 15-liter capacity, it takes approximately 30 to 45 minutes to reach 60°C from cold start.

Can I install the water heater outdoors?

This model is designed for indoor installation only. Exposure to rain or extreme temperatures may damage the unit and void the warranty.

What type of warranty does the AWH1028 come with?

Philips offers a 2-year warranty covering manufacturing defects. Register your product on the Philips website to activate the warranty.

Is the water heater prone to pressure relief valve dripping?

A small amount of dripping during heating is normal due to expansion. If it drips continuously, the pressure may be too high; install a pressure reducing valve.

Can I replace the heating element myself?

It is recommended to have a qualified technician replace the heating element. Attempting DIY repair may damage the seal and cause leaks, and void the warranty.

USER MANUAL AWH1028 PHILIPS

©2022 AquaShield All rights reserved.

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke

Philips N.V. used under license. This product has been manufactured by and is sold under the

responsibility of Guangdong AquaShield Health Technology Company Limited and Guangdong

Aquashield Health Technology Company Limited is the warrantor in relation to this product.

Rev A JUL 22

PHILIPS

热水器

电热水器

AWH1028/93(85HA)

AWH1045/93(70HA)

Blue Philips electric water heater with digital display showing temperature and control buttons (no readable text beyond branding)

说明书

目录

Technical drawing of a rectangular frame with labeled dimensions (D, C) and internal features (no text or symbols beyond labels)

8 安装及使用

8.1 安装前注意事项