AquaShield AWH1626 - Water heater PHILIPS - Free user manual and instructions
Find the device manual for free AquaShield AWH1626 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Storage Water Heater |
| Brand | Philips |
| Model | AquaShield AWH1626 |
| Capacity | 80 liters |
| Power | 2000 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Temperature Range | 30°C - 75°C |
| Dimensions (H x W x D) | 800 x 400 x 400 mm |
| Weight | 25 kg |
| Energy Efficiency Class | B |
| Heating Element | Incoloy 825 (corrosion-resistant) |
| Max Pressure | 0.7 MPa |
| Water Connection | 1/2 inch BSP |
| Safety Features | Thermal cut-out, Pressure relief valve, Anti-corrosion anode |
| Functions | Rapid heating, Auto shut-off, Temperature control |
| Maintenance | Anode replacement every 2 years, periodic descaling |
| Spare Parts | Heating element, Anode rod, Thermostat, Safety valve |
| Certifications | CE, RoHS |
| Warranty | 2 years |
| Country of Origin | China |
Frequently Asked Questions - AquaShield AWH1626 PHILIPS
How do I set the water temperature on the AquaShield AWH1626?
Turn the temperature control dial on the front panel clockwise to increase or counterclockwise to decrease. The recommended setting is 60°C for optimal energy efficiency and to prevent bacterial growth.
How do I drain the water heater for maintenance?
Turn off power and water supply. Attach a hose to the drain valve at the bottom. Open the valve and a hot water tap to allow air in. Drain completely. Close valve after.
What is AquaShield technology?
AquaShield is Philips’ anti-corrosion system using a titanium anode and specialized coating to extend heater life and protect against rust and scale buildup.
How often should I replace the anode rod?
Check the sacrificial anode every 2 years. Replace if more than 50% worn to prevent tank corrosion. Use only Philips-approved anodes.
Why is my water heater not heating water?
Possible causes: tripped safety thermostat, failed heating element, or power cut. Reset the thermostat by pressing the button. If problem persists, contact service.
Can I install the water heater myself?
Installation must be performed by a qualified professional per local codes. Incorrect installation voids warranty and poses safety risks.
Is it safe to leave the water heater on 24/7?
Yes, the heater has an auto shut-off and thermostat. For energy savings, use a timer or set to a lower temperature when not in use.
How do I clean the water heater?
Flush the tank annually via the drain valve. For descaling, use a citric acid solution or hire a professional. Do not use abrasive cleaners.
What spare parts are available for the AWH1626?
Common spares: heating element, anode rod, thermostat, safety valve, and gaskets. Order through Philips service centers or authorized dealers.
How do I reset the safety thermostat?
Locate the reset button under the cover panel. Press it with a small tool. If it trips again, there may be a fault; call a technician.
User questions about AquaShield AWH1626 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual AquaShield AWH1626 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AquaShield AWH1626 by PHILIPS.