Bluetooth Revo NC2 - Pregnant OTTO - Free user manual and instructions
Find the device manual for free Bluetooth Revo NC2 OTTO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Speaker |
| Model | Bluetooth Revo NC2 |
| Brand | OTTO |
| Dimensions (approx.) | 180 x 70 x 70 mm |
| Weight (approx.) | 500 g |
| Power Source | Built-in rechargeable Li-ion battery |
| Charging | Micro USB, 5V DC |
| Battery Life (approx.) | Up to 10 hours at medium volume |
| Charging Time (approx.) | 2-3 hours |
| Bluetooth Version | Bluetooth 5.0 |
| Bluetooth Range (approx.) | Up to 10 meters |
| Speaker Output Power | 10W RMS |
| Frequency Response | 80 Hz - 20 kHz |
| Supported Audio Formats | MP3, WMA, WAV, FLAC |
| Additional Functions | Hands-free calling, microSD card slot, FM radio, USB music playback |
| Controls | Power, volume up/down, play/pause, track forward/back, mode button |
| Audio Inputs | 3.5mm AUX, USB, microSD |
| Water Resistant | IPX5 (splash proof) |
| Accessories Included | Micro USB charging cable, 3.5mm audio cable, user manual |
| Maintenance | Wipe with a dry cloth; do not use abrasive cleaners |
| Safety | Keep away from heat sources; do not expose to extreme temperatures |
| Repairability | Battery can be replaced by a professional; no user-serviceable parts inside |
Frequently Asked Questions - Bluetooth Revo NC2 OTTO
How do I pair my phone with the OTTO Bluetooth Revo NC2 speaker?
Turn on the speaker and activate pairing mode by pressing and holding the Bluetooth button until the indicator flashes. On your phone, go to Bluetooth settings and select 'Bluetooth Revo NC2' from the list. If prompted for a code, enter '0000'.
Can I use the speaker while it's charging?
Yes, you can use the speaker while it is connected to a power source via micro USB. However, prolonged use while charging may affect battery lifespan.
How do I reset the speaker to factory settings?
To reset, press and hold the power and volume up buttons simultaneously for about 5 seconds until you hear a confirmation tone. This will clear all paired devices and restore default settings.
What should I do if the speaker doesn't connect to my device?
Make sure the speaker is in pairing mode (blinking LED). Delete the speaker from your device's Bluetooth list and try pairing again. Also ensure the speaker is within range (less than 10 meters).
How do I switch between Bluetooth, FM radio, and microSD modes?
Press the mode button (often marked with 'M') to cycle through Bluetooth, FM radio, microSD card, and AUX input modes. The speaker will announce the selected mode.
How long does the battery last on a full charge?
The battery lasts up to 10 hours at medium volume. Actual battery life may vary based on volume level and audio content.
Is the speaker waterproof?
The speaker has an IPX5 rating, meaning it is splash-proof and can resist water jets. It is not fully waterproof and should not be submerged.
Can I connect two speakers together for stereo sound?
This model does not support TWS (True Wireless Stereo) pairing. Only one speaker can be connected to a device at a time.
How do I clean the speaker?
Use a soft, dry cloth to gently wipe the exterior. Avoid using any liquid or abrasive cleaners. For the speaker grille, use a soft brush to remove dust.
What should I do if the speaker gets wet?
Immediately dry the speaker with a soft cloth and allow it to air dry completely before using or charging. Do not use a hair dryer or heat source.
User questions about Bluetooth Revo NC2 OTTO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual Bluetooth Revo NC2 - OTTO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bluetooth Revo NC2 by OTTO.
