Consul - Projection screen Draper - Free user manual and instructions

Type	Projection screen (manual pull-down or fixed frame, model Consul)
Brand	Draper
Model	Consul
Available Screen Surfaces	OptiView™ (Matt White XT1000E, Contrast Grey XH800E, Contrast White XH1100E), Glass Beaded CH3200E, Pearl White CH1900E, Argent White XH1500E, Ecomatt XT700E, OptiFlex™ (Matt White XT1000V, Grey XH600V, ReAct MS1000V, Pure White XT1300V, Pearl White MH1500V), ClearSound™ (Grey Weave XH600E, NanoPerf XT800V, Perf XT900V, Perf XT950E, White Weave XT900E), CineFlex™ (CineFlex White XT600V, CineFlex MH800V, CineFlex CH1200V), Rigid Rear Screens (IRUS, Cinescreen®, DiamondScreen™)
Cleaning Method (OptiView and OptiFlex Matt White, Contrast Grey, etc.)	Warm water or mild dish soap solution; wipe gently with soft cloth, rinse, blot dry. Do not allow cleaner to absorb. No solvents or abrasives. No Armor All®.
Cleaning Method (Glass Beaded)	Very soft brush or cloth; dust only. No soap, water, solvents, abrasives, or Armor All®.
Cleaning Method (Pearl White, Argent White)	Dampen 100% cotton cloth with clear water; wipe in one direction. For stubborn stains, use mild dish soap solution, rinse, air dry.
Cleaning Method (Ecomatt)	Blow off debris with air or use feather duster; or damp cloth with clear water, wipe one direction.
Cleaning Method (ClearSound, CineFlex)	Warm water or mild dish soap; soft cloth, rinse, blot dry. No abrasives or wax. No Armor All®.
Cleaning Method (Rigid Rear Screens)	Soft lint-free cloth for dust; mild soapy water for soil marks, wring cloth, rinse and blot dry. No solvents, abrasives, or Armor All®.
General Maintenance	Clean only when needed; avoid stains; contact Draper for stain removal advice.
Manufacturer	Draper Inc., 411 S. Pearl St., Spiceland, IN 47385 USA, www.draperinc.com
Warranty	Not specified in manual; contact Draper.

Frequently Asked Questions - Consul Draper

What is the Draper Consul projection screen?

The Draper Consul is a projection screen offering various viewing surfaces for different applications. It is available in multiple materials like OptiView, OptiFlex, ClearSound, CineFlex, and rigid rear screens.

How should I clean the OptiView Matt White XT1000E surface?

Use warm water or a mild dishwashing soap solution. Gently wipe with a soft disposable cloth, rinse completely with clear water, and blot dry. Do not allow cleaner to absorb into the fabric. Avoid solvents, abrasives, and Armor All®.

Can I use water to clean a glass beaded screen?

No. Clean glass beaded surfaces with a very soft brush or cloth only. Do not use soap, water, solvents, or abrasives. Armor All® will damage the surface.

How do I clean a Pearl White screen?

Use a clean, white 100% cotton cloth dampened with clear water. Wipe gently in one direction – no circular motions. For stubborn stains, use mild dish soap solution, then rinse and let air dry.

Is it safe to use Armor All on any Draper screen?

No. Armor All® is explicitly prohibited on all screen surfaces listed in the manual. It can damage the viewing surface.

What is the recommended cleaning method for Ecomatt screens?

First blow off debris with air or use a feather duster. If needed, use a clean white cloth dampened with clear water, wiping in one direction.

How should I clean a ClearSound or CineFlex screen?

Use warm water or mild dish soap solution. Gently wipe with a soft cloth, rinse, and blot dry. Do not use cleaners with abrasives or wax. Avoid Armor All®.

Can I use solvents on a rigid rear screen?

No. Use a soft lint-free cloth for dust. For soil marks, use mild soapy water with a cloth or sponge, wring out excess, rinse, and blot dry. Avoid solvents, abrasives, and Armor All®.

How do I remove stubborn stains from my projection screen?

For most surfaces, a mild dishwashing soap solution can be used. However, some stains may not be removable. For specific stain removal, contact Draper Inc. for advice.

Where can I get more information about my Draper screen?

Visit www.draperinc.com or contact Draper Inc. at 411 S. Pearl St., Spiceland, IN 47385 USA. Phone: [phone], fax: [phone].

USER MANUAL Consul Draper

Projection Viewing Surface Care & Maintenance Instructions

Please Note: Cleaning should be undertaken only when needed and with great care. Not all stains can be removed. Please take care to protect your screen from damage to minimize the need for these procedures.

OptiView™

Matt White XT1000E, Contrast Grey XH800E, Contrast White XH1100E

Clean surface with warm water. A solution of mild dishwashing liquid diluted with warm water can also be used. Using a soft, disposable cloth, gently wipe the surface, completely rinse the entire surface with clear water and blot dry. Do not allow any cleaner to be absorbed by the fabric. Do not use cleaning solvents or abrasives. Do not use Armor All ^® .

Glass Beaded CH3200E

Clean with a very soft brush or cloth and carefully dust the surface. Do not use soap, water, solvents or abrasives. Do not use Armor All®. These substances will damage a glass beaded viewing surface.

Pearl White CH1900E, Argent White XH1500E

Using a clean, white cloth (100% cotton preferred) that is dampened with clear water, gently wipe the area in one direction. Do not use a circular motion. To clean a stubborn stain or a sticky surface, a solution of mild dishwashing liquid diluted with warm water can also be used following the same procedure as for water, and allow it to air dry.

Ecomatt XT700E

Blow off excess debris with air or use a feather duster, or using a clean, white cloth (100% cotton preferred) that is dampened with clear water, gently wipe the area in one direction.

OptiFlex™

Matt White XT1000V, Grey XH600V, ReAct MS1000V, Pure White XT1300V

Clean surface with warm water. A solution of mild dishwashing liquid diluted with warm water can also be used. Using a soft, disposable cloth, gently wipe the surface, completely rinse the entire surface with clear water and blot dry. Do not allow any cleaner to be absorbed by the fabric. Do not use cleaners which contain abrasives or wax. Do not use Armor All ^® .

Pearl White MH1500V

Clean with a very soft brush or cloth and carefully dust the surface. Do not use soap, water, solvents or abrasives. Do not use Armor All®.

ClearSound™

Grey Weave XH600E, NanoPerf XT800V, Perf XT900V, Perf XT950E, White Weave XT900E

Clean surface with warm water. A solution of mild dishwashing liquid diluted with warm water can also be used. Using a soft, disposable cloth, gently wipe the surface, completely rinse the entire surface with clear water and blot dry. Do not allow any cleaner to be absorbed by the fabric. Do not use cleaning solvents or abrasives. Do not use Armor All ^® .

CineFlex™

CineFlex White XT600V, CineFlex MH800V, CineFlex CH1200V

Gently clean this rear projection material with warm water. A solution of mild dishwashing liquid diluted with warm water can also be used. Using a soft, disposable cloth, gently wipe the surface, completely rinse the entire surface with clear water and blot dry. Do not allow any cleaner to be absorbed by the fabric. Do not use cleaners which contain abrasives or wax. Do not use Armor All ^® .

Rigid Rear Screens

IRUS, Cinescreen ^® , DiamondScreen ^™

Rigid rear screens can be cleaned with a soft, lint free cloth to remove dust from the surface. Remove soil marks with a cloth or sponge and mild soapy water. Wring free of excess moisture before applying, rinse and blot dry. Do not use solvent or abrasives. Do not use Armor All®.

411 S. Pearl St., Spiceland, IN 47385 USA ■ 765-987-7999

www.draperinc.com ■ fax [phone]

Copyright © 2015 Draper Inc. Form Care&Maintenance_Inst15 Printed in U.S.A.

These are basic cleaning tips for dust or dirt. For more information on cleaning stains, please contact Draper, Inc.

Cinescreen® is a registered trademark of Draper, Inc.

Armor All® is a registered trademark of Armor All Products Corporation