SE50M12AAH - Water heater GE - Free user manual and instructions
Find the device manual for free SE50M12AAH GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | GE |
| Model | SE50M12AAH |
| Capacity | 50 gallons |
| Dimensions (H x W x D) | 56.25 in. x 22.0 in. x 22.0 in. |
| Weight | 152 lbs |
| Power Supply | 240 V / 60 Hz / 30 A |
| Wattage | 4500 W (dual elements) |
| Energy Factor | 0.92 (UEF) |
| First Hour Rating | 62 gallons |
| Recovery Rate | 31.5 GPH @ 90°F rise |
| Thermostat Type | Dual thermostats (upper and lower) |
| Anode Rod | Powered anode rod (corrosion protection) |
| Warranty | 12-year limited tank warranty |
| Maintenance | Annual flushing recommended; replace anode rod every 3-5 years |
| Safety Features | T&P relief valve, auto shutoff, overheat protection |
| Repairability | Replaceable heating elements, thermostats, anode rod, and T&P valve |
Frequently Asked Questions - SE50M12AAH GE
How do I set the temperature on my GE SE50M12AAH water heater?
To adjust the temperature, locate the upper and lower thermostat access panels. Remove the insulation and use a flathead screwdriver to set the desired temperature (typically 120°F for energy efficiency and safety). Replace insulation and panels securely.
Why is my water heater making popping noises?
Popping noises are usually caused by sediment buildup at the bottom of the tank. Flush the tank annually to remove sediment. If the noise persists, consider descaling or checking the heating elements.
How often should I flush my water heater?
It is recommended to flush your water heater at least once a year. Turn off the power and cold water supply, attach a hose to the drain valve, and drain several gallons to remove sediment. Close the valve, refill, and restore power.
What does the reset button do on the GE SE50M12AAH?
The reset button (often located above the upper thermostat) is a safety feature that trips if the water temperature exceeds 180°F. To reset, press the button firmly. If it trips repeatedly, check for a malfunctioning thermostat or high temperature settings.
How long should my water heater last?
With proper maintenance, including annual flushing and replacing the anode rod every 3-5 years, the GE SE50M12AAH can last 10-15 years. The tank has a 12-year limited warranty.
Can I install a water heater myself?
Installation should be done by a qualified professional to ensure compliance with local codes and safety standards. It involves electrical connections, plumbing, and T&P valve discharge piping.
What size breaker is needed for my water heater?
The GE SE50M12AAH requires a 30 amp double-pole breaker with 10-gauge wire for the 4500W elements. Always consult a licensed electrician.
Why is my water heater leaking from the top?
Leaks from the top may be due to loose plumbing connections, a faulty T&P valve, or a leaking top heating element gasket. Tighten connections or replace the gasket. If the tank itself is leaking, replacement may be needed.
How do I replace the anode rod?
Turn off power and water, drain a few gallons, locate the anode rod on top of the tank, unscrew it using a 1-1/16 inch socket, and install a new one. Apply Teflon tape to threads. Replace if more than 6 inches of core wire is exposed.
What is the energy factor of this water heater?
The GE SE50M12AAH has a Uniform Energy Factor (UEF) of 0.92, making it an energy-efficient model that qualifies for ENERGY STAR certification.
User questions about SE50M12AAH GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SE50M12AAH - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SE50M12AAH by GE.