SmartWater PG50T9A - Water heater GE - Free user manual and instructions
Find the device manual for free SmartWater PG50T9A GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tank Water Heater |
| Model | SmartWater PG50T9A |
| Brand | GE |
| Capacity | 50 Gallons |
| Fuel Type | Electric |
| Height | 60 inches |
| Diameter | 24 inches |
| Weight (Empty) | 150 lbs |
| Voltage | 240 V |
| Wattage | 4500 W (dual elements) |
| Maximum Temperature Setting | 160°F |
| Thermostat | Adjustable upper and lower |
| Recovery Rate | 41 gallons per hour (90°F rise) |
| First Hour Rating | 62 gallons |
| Energy Factor (EF) | 0.92 |
| Anode Rod | Powered anode (reduces odor) |
| Safety Features | Temperature and Pressure Relief Valve, Thermal Cut-off |
| Tank Material | Steel with vitreous enamel lining |
| Insulation | 2-inch non-CFC foam |
| Warranty | 10 years parts and limited labor |
| Maintenance | Annual flushing, check anode every 3 years |
Frequently Asked Questions - SmartWater PG50T9A GE
How do I reset the water heater if it stops heating?
Check the circuit breaker first. If tripped, reset it. Also press the red reset button on the upper thermostat (behind access panel). If it continues tripping, call a professional.
What is the recommended temperature setting?
GE recommends setting the thermostat to 120°F for energy efficiency and to prevent scalding. Adjust using a screwdriver on the thermostat dial.
How often should I flush the water heater?
Flush the tank once a year to remove sediment. Turn off power, connect a hose to the drain valve, open the valve and let water run until clear.
What does the "SmartWater" feature do?
The SmartWater system uses a powered anode rod to reduce sulfur odors and extend tank life by actively preventing corrosion.
How do I replace the heating elements?
Turn off power at breaker. Drain the tank. Use a 1-1/2 inch socket to unscrew the element. Apply Teflon tape to the threads of the new element and tighten. Refill before restoring power.
Why is there no hot water?
Check power supply (breaker, wire connections). Test the thermostat and element with a multimeter. If element is open (infinite resistance), replace it.
Is the water heater suitable for a home with hard water?
Yes, but hard water can reduce efficiency. Install a water softener and flush the tank more frequently (every 6 months) to prevent sediment buildup.
How long will the water heater last?
With proper maintenance, GE SmartWater heaters typically last 10-15 years. The 10-year warranty covers tank replacement for leaks.
Can I install the water heater myself?
Installation requires electrical and plumbing knowledge. Most authorities require a licensed professional to ensure compliance with local codes and safety.
What should I do if the temperature and pressure relief valve leaks?
First, test the valve by lifting the lever briefly. If it continues to leak, replace the TPR valve. This is a critical safety component; do not plug or cap it.
User questions about SmartWater PG50T9A GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SmartWater PG50T9A - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartWater PG50T9A by GE.