Arion ET-AR602R - Loudspeaker EAGLE - Free user manual and instructions

Type	Floor standing powered speakers
Continuous Power	100 Watts RMS
Peak Power	180 Watts
Frequency Response	45 Hz - 20 kHz
Impedance	8 Ohms
Tweeter	1 inch silk laminate
Woofer	3 inch fiberglass laminate
Subwoofer	8 inch paper
Sensitivity	89 dB
Signal-to-Noise Ratio	87 dB (typical)
Audio Input Connectors	RCA
Dimensions (W x D x H)	6.2 x 11.9 x 25.1 inches
Weight	37.7 lbs
Warranty	1 year limited warranty
Built-in Amplifier	Yes, no external A/V receiver needed
Remote Control	Wireless remote included
Karaoke Inputs	Two 6.35mm microphone inputs with echo and volume controls
LCD Display	Shows volume, treble, bass
Power Requirement	110-120V AC, 50/60 Hz, 180W
Cleaning	Clean only with dry cloth

Frequently Asked Questions - Arion ET-AR602R EAGLE

Do I need an external A/V receiver for these speakers?

No, the Eagle Arion ET-AR602R has a built-in amplifier, so you can connect them directly to your TV or other audio source.

How do I connect the speakers to my TV?

Use the included RCA to 3.5mm audio cable to connect from your TV's headphone or audio output to the speaker's RCA input jacks.

Can I use microphones with these speakers?

Yes, there are two 6.35mm microphone inputs with separate volume and echo controls for karaoke.

How do I adjust the volume, treble, and bass using the remote?

Press Mast+/Mast- for volume, Tre+/Tre- for treble, and Bass+/Bass- for bass. Press Reset to return to factory defaults.

What is the power output of the speakers?

The continuous power is 100 Watts RMS and peak power is 180 Watts.

How do I clean the speakers?

Clean only with a dry cloth. Do not use water or cleaning agents.

What is the warranty period?

The speakers come with a 1-year limited warranty from the date of purchase.

Can I place the speakers near walls?

Yes, placing the subwoofer near walls can enhance lower frequencies.

What is the effective range of the remote control?

The remote control works within approximately 10 feet and should be pointed at the subwoofer.

How do I reset the EQ levels?

Press the Reset button on the remote control to restore factory default EQ settings.

USER MANUAL Arion ET-AR602R EAGLE

Line drawing of two speakers with circular speaker heads and control panel (no text or symbols)

ET-AR602R-BK

User Instructions: Please read carefully before using Instrucciones para el usuario: Leer instructivo anexo

User Manual

Floor Standing Powered Speakers with Remote Control & Karaoke Input

Manual del usuario

Risk of electrical shock! Basic precautions should always be following to reduce the risk of fire and injury to persons:

1. Do not use this product near water i.e. bath rub or swimming pool.
2. Unplug the power cord when not in use and before cleaning.
3. Close supervision is necessary when used near children.
4. Clean only with dry cloth.
5. Do not attempt to repair or open the product.

Electrical Characteristics

110-120V AC

50/60 Hz

180 Watts

Made in China

Introduction

Pump up the volume with Eagle Arion ET-AR602R-BK, twin floor standing powered speakers designed for the sound connoisseur with affordability and ease of use in mind. The 602 eliminates the need for an external A/V receiver without sacrificing performance, delivering clean, near full spectrum sound to create the ultimate home entertainment experience.

Ready to use, straight out of the box, the 602 is compatible with most HDTVs, DVD players, gaming consoles and more. By using technologies such as built-in amplifier; premium woofer and tweeter cone materials for deep lows and crystal highs; and precisely shaped wooden cabinet to absorb unwanted vibrations, the 602s provide premium sound without breaking the bank.

Product Setup

graph TD
    A["Digital Cable Box / DVR"] --> D["HDTV"]
    B["Gaming Concole"] --> D
    C["Blu-ray / DVD Player"] --> D
    E["Media Player"] --> D
    D --> F["arlon"]
    D --> G["arlon"]

The 602 is targeted at home theater users looking to add a pair of high quality speakers without the hassle and expense of an external A/V receiver. The 602 is designed with simplicity in mind and is ready to use straight out of the box with most HDTVs via standard RCA audio jacks.

This is one example how you might set up the speakers. Actual home theater setup may vary.

What's in the Box?

• Two floor standing speakers
- User manual
- Wireless remote
• RCA to 3.5mm audio cable
• RCA to RCA audio cable
• 11.5 feet speaker wire

Features

• Built-in amplifier (no external A/V receiver needed)
• RCA audio input jacks (compatible with most HDTVs)
• Premium quality 3-way loudspeaker system (reproduces clear, near full spectrum sound)
- Wireless remote
• Digital control for volume, treble and bass
- Two 6.35mm microphone inputs with karaoke echo and volume controls
• LCD display shows volume, treble and bass

Specifications

• Type: floor standing speakers
• Continuous Power: 100 Watts RMS
• Peak Power: 180 Watts Peak
• Frequency Response: 45Hz to 20kHz
• Impedance: 8 Ohms
• Tweeter: 1 inch silk laminate
• Woofer: 3 inch fiberglass laminate
• Subwoofer: 8 inch paper
- Sensitivity: 89 dB
• Signal-To-Noise Ratio: 87 dB (typical)
• Audio Input Connectors: RCA
• Dimensions: 6.2 x 11.9 x 25.1 inches
• Weight: 37.7 lbs
• Warranty: 1 year limited warranty

Product Setup

Turn clockwise to increase and counterclockwise to decrease master volume.

Turn clockwise to increase and counterclockwise to decrease high frequencies.

Turn clockwise to increase and counterclockwise to decrease low frequencies.

Turn clockwise to increase and counterclockwise to decrease microphone volume.

Turn clockwise to increase and counterclockwise to decrease microphone echo.

Connect up to two microphones

Adjusting Volume/Mute using Remote Control

Adjusting Treble/Bass using Remote Control

Resetting EQ Levels using Remote Control

Remote Control

1. Press Mute to turn on or off master volume.
2. Press Mast+ or Mast- to increase or decrease volume.
3. Press Tre+ or Tre- to increase or decrease treble.
4. Press Bass+ or Bass- to increase or decrease bass.
5. Press Reset to reset all EQ levels to factory default.
6. Press ST-BY to turn on or off LCD display. The display automatically turns off after 10 seconds of inactivity to save energy.

graph TD
    A["Audio Source ie: HDTVs"] --> B["1"]
    B --> C["Audio Input R L"]
    C --> D["Output to Right Speaker + -"]
    D --> E["2"]
    E --> F["Input + -"]
    G["Left Speaker"] --> H["3"]
    I["Right Speaker"] --> J["3"]

1. Connect to audio source
2. Connect to right speaker
3. Connect to 120V\~60Hz 180W AC outlet
4. Turn on power
5. Adjust volume as needed

Optimum Settings

1. Always point the remote control at the subwoofer. The remote control's effective range is approximately 10 feet.
2. For best tonal fidelity, we recommend setting your audio source to line level output and use the speaker to control overall volume level.
3. For best tonal fidelity, we recommend using the default EQ levels so you hear the music exactly the same way it was recorded. The easiest way to do this is by pressing the Reset button located on the remote control.
4. This speaker system is most efficient when the volume level is set between 30% to 80%. You get highest sound quality and minimum distortion within these volume levels.
5. Place the satellite speakers at least 16 inches from each other. This enhances stereo sound effect and perceived sound field.
6. Provide ample space around the subwoofer unit. It needs enough room to move massive amounts of air! To further enhance lower frequencies, place the subwoofer unit near walls.

Limited Warranty

Eagle Tech warrants that the product, in the course of its normal use, will be free from defects in material and workmanship for a period of one (1) year. This limited warranty period shall commence on the purchase date appearing on your purchase receipt. Eagle Tech shall have no liability for any product returned if Eagle Tech determines that the product was not purchased from authorized retailers, that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before Eagle Tech receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing parts. The foregoing warranty shall extend to repaired or replaced products for the remaining of the applicable period of the original warranty or ninety (90) days from the date of shipment of a repaired or replaced product, whichever is longer.

EAGLE TECH COMPUTERS, INC. www.eagletechusa.com

© 2008 Eagle Tech Computers, Inc. All rights reserved. Eagle Tech, the Eagle Tech logo and other Eagle Tech marks are owned by Eagle Tech and may be registered. All other trademarks are the property of their respective owners.

Advertencias

Eagle Tech Computers, Inc.

www.eagletechusa.com