BlueBridge Designer II - Hi-Fi System Atlas Sound - Free user manual and instructions
Find the device manual for free BlueBridge Designer II Atlas Sound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hi-Fi System |
| Brand | Atlas Sound |
| Model | BlueBridge Designer II |
| Design | Compact shelf system with blue backlight |
| Dimensions (W x H x D) | 430 x 140 x 360 mm (16.9 x 5.5 x 14.2 in) |
| Weight | 8.5 kg (18.7 lbs) |
| Power Consumption | 100W (max) |
| Standby Power | <0.5W |
| Amplifier Output Power | 2 x 50W RMS (4 ohms) |
| Supported Impedance | 4 - 8 ohms |
| Frequency Response | 20 Hz - 20 kHz ±1 dB |
| Signal-to-Noise Ratio | ≥90 dB |
| Total Harmonic Distortion | <0.05% |
| Audio Inputs | 2x RCA, 1x 3.5mm auxiliary, 1x optical digital |
| Speaker Outputs | 2 pairs (A/B) with binding posts |
| Connectivity | Bluetooth 5.0, USB (MP3 playback) |
| Headphone Output | 6.3mm jack on front panel |
| Remote Control | Included (IR, with battery CR2025) |
| Power Supply | AC 110-240V, 50/60Hz |
| Warranty | 2 years |
| Cleaning | Wipe with soft dry cloth; avoid solvents |
| Safety | Do not expose to moisture; disconnect during storms |
| Spare Parts | Contact Atlas Sound support or authorized dealer |
Frequently Asked Questions - BlueBridge Designer II Atlas Sound
How do I connect the BlueBridge Designer II to my TV?
Use the optical digital input for best sound quality. Connect a TOSLINK cable from your TV's optical output to the system's optical input. Select the 'Optical' source using the remote or front panel.
Can I play music via Bluetooth?
Yes. Activate Bluetooth pairing mode on the system by pressing the Bluetooth button on the remote or front panel. Select 'Atlas Sound BlueBridge II' from your device's Bluetooth list.
What is the maximum USB drive capacity supported?
The USB port supports drives up to 32 GB formatted as FAT32. It can play MP3, WMA, and WAV files. Drives with multiple partitions may not be recognized.
How do I clean the front panel and controls?
Use a soft, lint-free cloth slightly dampened with water. Do not use alcohol, ammonia, or abrasive cleaners. Ensure the system is turned off and unplugged before cleaning.
Why is there no sound from the speakers?
Check the following: 1) Speaker connections are secure. 2) Source is selected correctly. 3) Volume is not at minimum. 4) Mute function is not active. 5) If using Bluetooth, ensure your device is connected and volume is up.
Can I use different impedance speakers on channels A and B?
We recommend using speakers of the same impedance (4 or 8 ohms) for both channels. Mixing impedances may cause uneven volume or damage the amplifier. For best performance, use 8-ohm speakers.
How do I reset the system to factory settings?
Press and hold the Power button for 10 seconds while the unit is on. The display will show 'RESET' and the system will restart. This clears all stored settings and Bluetooth pairings.
What is the standby power consumption?
In standby mode, the system consumes less than 0.5 watts. To fully turn off, switch off the main power switch on the rear panel or unplug the unit.
Can I connect a subwoofer to the BlueBridge Designer II?
This model does not have a dedicated subwoofer output. However, you can connect a powered subwoofer with high-level inputs (speaker wire) to the Speaker B terminals if you are not using those for other speakers.
Where can I find replacement remote control or spare parts?
Contact Atlas Sound customer support or visit your local authorized dealer. Common spare parts like remote controls, antennas, and foot pads are available. Provide your model number 'BlueBridge Designer II'.
User questions about BlueBridge Designer II Atlas Sound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual BlueBridge Designer II - Atlas Sound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BlueBridge Designer II by Atlas Sound.