B810 - Alarm system BOSCH - Free user manual and instructions

Product Type	Wireless Receiver (SDI2 Bus Interface)
Brand	Bosch
Model	B810
Dimensions	139.70 mm x 209.60 mm x 31.80 mm (5.50 in x 8.25 in x 1.25 in)
Wiring Distance	243 m (800 ft)
Wiring Gauge	0.65 mm (22 AWG) to 2.0 mm (18 AWG)
Tamper Detection	Cover and wall tamper switch; transmits signal when removed
Power/Voltage	10-14 VDC, 12 VDC nominal
Maximum Current Draw	70 mA
Frequency	433.42 MHz
Operating Temperature	0°C to +49°C (+32°F to +120°F)
Relative Humidity	Up to 93% non-condensing
RF Protocol	RADION wireless protocol
Antennas	Dual internal (spatial and polar diversity)
Supervision Capacity (Wireless Points)	Up to 504
Supervision Capacity (Keyfobs)	Up to 1000
Supervision Capacity (Repeaters)	Up to 8
Address Switch	Single-digit rotary switch for bus address
LED Indicators	External status LEDs for troubleshooting
Jamming Detection	Reports interference when ambient noise exceeds threshold for 20 seconds
Mounting	Indoor, wall mount with integrated bubble level
Certifications	RCM, ANSI/SIA CP-01, CE, UL (1023, 1076, 1610, 365, 609, 636, 985), CSFM, FCC Part 15 Class B
Compatible Control Panels	B9512G/B8512G, B6512/B5512/B4512/B3512, GV4 Series (D9412GV4, D7412GV4 v2.xx+)
Included Components	Wireless receiver, hardware pack, installation guide

Frequently Asked Questions - B810 BOSCH

What is the Bosch B810?

The B810 is a wireless receiver that connects RADION wireless peripherals to compatible Bosch control panels via the SDI2 bus.

What frequency does the B810 operate on?

It operates at 433.42 MHz, offering improved penetration and signal reliability.

How many wireless devices can the B810 supervise?

It supervises up to 504 wireless points, 1000 keyfobs, and 8 repeaters.

What control panels are compatible with the B810?

Compatible panels include Bosch B9512G/B8512G, B6512/B5512/B4512/B3512, and GV4 Series (D9412GV4, D7412GV4 v2.xx or higher).

Does the B810 have tamper protection?

Yes, it has both cover and wall tamper switches that send a signal if the device is removed.

How do I set the bus address on the B810?

Use the single-digit rotary address switch located on the back of the housing to set the address.

What is the maximum wiring distance from the control panel?

The maximum distance is 243 m (800 ft) using appropriate gauge wire.

What is the power requirement for the B810?

It requires 10-14 VDC (12 VDC nominal) and draws up to 70 mA.

Does the B810 detect RF interference?

Yes, it detects and reports RF jamming when noise levels exceed thresholds for 20 seconds.

What is the operating temperature range?

The B810 operates from 0°C to +49°C (32°F to 120°F) with up to 93% non-condensing humidity.

USER MANUAL B810 BOSCH

B810 Wireless SDI2 bus interface

www.boschsecurity.com

BOSCH

Invented for life

White electronic device labeled 'BOSCH' with a red indicator point on the top (no other text or symbols visible)

RADION wireless from Bosch provides the range, scalability and exceptional battery life required to ensure reliable performance and superior quality. Advanced diagnostics and multiple device enrollment options make installation and maintenance simple and cost effective. With a complete line of peripherals, RADION provides the flexibility for virtually any application requirement.

System overview

The B810 is a wireless receiver that connects RADION wireless peripherals such as the motion and specialty detectors, keyfobs, panic buttons, door window contacts, repeaters, and more, to supported Bosch control panels using the SDI2 Bus connection. The receiver supports RF communication at 433.42 MHz This frequency features improved penetration, reflection, and refraction of signal for superior range, and reliability. The receiver also features dual antennas to achieve spatial and polar diversity to further improve RF communication reliability. Enclosed within the receiver housing for higher security, the receiver is equipped with tamper protection, and

▶ Dual internal antennas provide spatial and polar RF signal reception for high reliability
▶ Cover and wall tamper protection
▶ Multiple device enrollment options as well as RF diagnostics ensure efficient and effective installation
▶ Supports supervision of wireless points (504), keyfobs (1000), and repeaters (8)
▶ External status LEDs

detects and reports radio frequency interferences. The receiver supports supervision of wireless points (504), key fobs (1000), and repeaters (8).

The receiver can be easily accessed and configured for a compatible control panel using the address switch on the back of the receiver housing. The receiver address switch provides a single-digit setting for the receiver's address, allowing for ease of installation.

Functions

The receiver uses the RADION wireless protocol which supports:

• SDI2 bus communication
• Tamper input processing
• RF interference (jamming) detection and reporting
• Signal strength and margin reporting
• Enroll Device Database management

Address switch addressing

Use the address switch to easily assign a bus address or setup during installation.

Easy installation

The sliding self-locking enclosure has an integrated bubble level and a custom gap-free, lift gate style terminal block to make installation easier, faster, and more reliable.

LED display

The LED provides status and troubleshooting information about the receiver and its connection.

RF interference (jamming) detection and reporting

The receiver detects and reports interference jamming when the ambient noise level is above jamming thresholds for a continuous period of 20 seconds.

Communications

RF packet information is received through the use of two spatial and polar diversity antennas. The receiver then transmits a 4-bit sequence of information back to the control panel for status changes.

Wall and cover tamper switch

The receiver transmits a tamper signal when someone removes the device from it's base, or pulls it away from the wall.

Certifications and approvals

Region Regulatory compliance/quality marks
Australia RCM [B810]
USA ANSI-	SIA	CP-01-2010-Control Panel Standard - Features for False Alarm Reduction
Europe CE EMC, LVD, R&TTE, RoHS [B810]
USA UL [B810, RFRP-A]
	UL UL 1023 - Household Burglar Alarm System Units
	UL UL 1076 - Proprietary Burglar Alarm Units and Systems
	UL UL 1610 - Central Station Burglar Alarm Units
	UL UL 365 - Police Station Connected Burglar Alarm Units
	UL UL 609 - Standard for Local Burglar Alarm Units and Systems
	UL UL 636 - Holdup Alarm Units and Systems
	UL UL 985 - Household Fire Warning System Units (6th edition)
	CSFM California State Fire Marshal
	FCC Part 15 Class B

Installation/configuration notes

Mounting considerations

You can mount the wireless receiver in residential, commercial or industrial locations in which a compatible control panel is already installed. The installation of the wireless receiver should be at a distance no greater than 243 m (800 ft) from the control panel.

Wiring considerations

The wireless receiver connects to a control panel using the SDI2 connections (PWR, A, B, COM). Use appropriate gauge wires from the receiver to the control panel when connecting the wiring to the terminal block of the receiver.

Compatibility

B9512G/B8512G

B6512/B5512/B4512/B3512

GV4 Series (D9412GV4, D7412GV4 v2.xx or higher) control panels

RFDL-11-A/RFDL-11 motion detector

RFDW-SM-A/RFDW-SM standard door/window contact

RFDW-RM-A/RRDW-RM recessed door/window contact RFRP-A/RFRP repeater

RFPR-12-A/RFPR-12 motion detector

RFPR-C12-A/RFPR-C12 motion detector (curtain)

RFUN-A/RFUN universal transmitter

RFKF-FB-A /RFKF-FBS-A/RFKF-FB/RFKF-FBS 4-button keyfob

RFKF-TB-A /RFKF-TBS-A/RFKF-TB/RFKF-TBS 2-button keyfob

RFPB-TB-A/RFPB-TB 2-button panic

RFPB-SB-A/RFPB-SB single button panic

RFGB-A/RFGB glass break

RFSM-A/RFSM smoke detector

Parts included

QuantityComponent

1 Wireless receiver

1 Hardware pack

1 Installation guide

Technical specifications

Properties

Dimensions 139.70 mm x 209.60 mm x 31.80 mm(5.50 in x 8.25 in x 1.25 in)

Wiring distance 243 m (800 ft)

Wiring gauge 0.65 mm (22 AWG) to 2.0 mm (18 AWG)

Tamper detection Transmits a tamper switch signal when the unit is removed from its base, or the mounting surface.

Power

Power/voltage	10-14 VDC, 12 VDC nominal
Maximum current draw 70 mA
Frequency 433.42 MHz

Environmental Considerations

Operating Environment	0°C to +49°C (+32°F to +120°F)
Relative humidity Up to 93% non-condensing
Use Intended for indoor use.

Ordering information

B810 Wireless SDI2 bus interface

Receives RF signals from RADION transmitters, repeaters, and glassbreaks. Operates at 433.42 MHz. For use with compatible SDI2 bus control panels. Order number B810

Represented by:

Europe, Middle East, Africa:

Bosch Security Systems B.V.

P.O. Box 80002

5600 JB Eindhoven, The Netherlands

Phone: [phone]

[e-mail]

emea.boschsecurity.com

Germany:

Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, New York, 14450, USA

Robert Bosch (SEA) Pte Ltd, Security Systems

11 Bishan Street 21

Singapore 573943

Phone: [phone]

Fax: [phone]

[e-mail]

www.boschsecurity.asia