LeapPad3X - Tablet Leap Frog - Free user manual and instructions

Brand	Leap Frog
Model	LeapPad3X
Product Type	Tablet
Age Range	3 years and up (with adult supervision for charging)
Power Source	Rechargeable lithium-polymer battery (non-removable)
Charging Time	Approximately 4 hours with included AC adapter; 7 hours via USB
AC Adapter Input	120-240V AC, 50/60Hz
AC Adapter Output	5V DC, 1.5A, 7.5VA
Connectivity	Wi-Fi (802.11 b/g/n)
Audio	Built-in speakers, headphone jack
Display	Color touchscreen
Battery Indicator	Yellow LED while charging, green when fully charged
Operating Temperature	5°C to 38°C (40°F to 100°F)
Cleaning	Use a slightly damp cloth (cold water); no soap or chemicals
Safety Warning	Not for children under 3 years; choking hazard from cords
Battery Warning	Do not attempt to remove battery; contact support
Hearing Protection	Use at low volumes; limit listening time to 90 minutes
Seizure Warning	Rare possibility from light flashes; take breaks
Regulatory Compliance	FCC Part 15, IC, CE, R&TTE Directive
SAR Value	0.29 W/kg (body)
Includes	AC adapter, USB cable, user manual
Repair	No user-serviceable parts; contact LeapFrog customer support

Frequently Asked Questions - LeapPad3X Leap Frog

How long does it take to fully charge the LeapPad3X?

Approximately 4 hours using the included AC adapter, or about 7 hours when using the USB cord connected to a computer.

Can I use a different charger with the LeapPad3X?

No, only use the included LeapFrog AC power adapter or the provided USB cord. Using other chargers may cause electric shock or damage.

What should I do if the screen cracks?

Immediately remove the product from use and contact LeapFrog Consumer Services. Do not attempt to repair it yourself.

How do I clean the LeapPad3X?

Disconnect all cords first. Clean with a slightly damp cloth using cold water only. Do not use soap, detergent, or other chemicals, and never submerge the device.

Is the LeapPad3X waterproof?

No, it is not waterproof. Avoid exposure to liquids. If it gets wet, unplug all cables, turn it off, and allow it to dry thoroughly before reuse. Do not use a hairdryer or heat source.

How do I connect to Wi-Fi?

If you experience difficulty with Wi-Fi connectivity, troubleshooting suggestions are available online at www.leapfrog.com/support. The device supports Wi-Fi 802.11 b/g/n.

Why is the battery indicator light yellow?

A yellow LED indicates that the battery is currently charging. When fully charged, the light turns green. If the light is off, the device is not connected via USB or not charging.

Can I replace the battery?

No, the lithium rechargeable battery cannot be removed. For power or battery issues, contact LeapFrog customer support. Never attempt to remove the battery.

What should I do if the device gets wet?

Unplug all cables and turn the device OFF immediately. Allow it to dry thoroughly before reusing. Do not attempt to dry with a hairdryer or heat source, and do not reconnect if wet or damaged.

Are there any hearing concerns when using headphones?

Yes, long-term exposure to loud sounds may cause permanent hearing loss. Use at low volumes, limit listening to 90 minutes, and take quiet breaks. If you experience ringing or muffled hearing, stop listening and have your hearing checked.

USER MANUAL LeapPad3X Leap Frog

Operating Instructions

Wi-Fi connection support. If you experience any diffi culty with Wi-Fi connectivity, troubleshooting suggestions are available online at www.leapfrog.com/support

For indoor, dry-location use only. Do not use the product near a sink or other wet locations. Take care not to spill food or any kind of liquid on this product as it may render it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or other heat source. Do not re-connect to the AC outlet if wet or damaged.

Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave the product in your car as the temperatures in parked cars can exceed the acceptable storage temperature. Exposure to extreme temperatures can result in shortened battery life or cause the product to temporarily stop working.

Handle with care. To avoid injury, damage to this product or other property, avoid dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign objects or paint the product. Clean your hands before handling the product if they have been exposed to suntan lotions or other chemicals.

Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the unit in water. Allow to dry thoroughly before re-use.

Do not connect to computer or the AC wall outlet if wet or damaged.

Important Safety Instructions:

⚠️ Please read all the Important Safety Instructions prior to using LEAPPAD3X. Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage to LEAPPAD3X or other property.

ACCESSORIES: Please read all safety instructions for any accessories or other products before using with LEAPPAD3X. LeapFrog is not responsible for the operation of third-party accessories or their compliance with safety and regulatory standards.

CAUTION: Routinely check this toy for proper and safe condition. If there is any damage or broken parts, remove toy from use.

WARNING: The USB Cord or AC Adapter could be a strangulation hazard. Not for children under 3 years.

CAUTION: If for any reason the screen (display) is fractured or cracked, immediately remove this product from use.

PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high volume, may result in permanent hearing loss. When using headphones or ear buds, it is recommended that the product is listened to at lower volumes for shorter periods of time. Set the volume while in a quiet environment; turn the volume does not have you cannot hear people speaking near you. Limit the listening time to 10 minutes, followed by a quiet period. The volume in the volume, the less time required before your hearing may be affected. If you experience ringing in your ears or hear affi ed speech, stop listening and have your hearing checked.

WARNING: It is rare but possible for seizures to be triggered by light flashes or patterns. Play/watch in a well-lit room and take 10- to 15-minute breaks every hour.

Battery Replacement

WARNING: The lithium rechargeable battery cannot be removed from the product. For your safety, never try to remove the battery. For power or battery issues, please contact LeapFrog customer support. Contact information for your local support is available at www.leapfrog.com/support

Battery Charging BC

LEAPPAD™3X is equipped with a rechargeable lithium-polymer battery. It will require about 4 hours of charging using the included AC adapter (or about 7 hours using the included USB cord and computer) prior to use. Attempting to charge via connection to the computer while device is in use will take much longer.

CAUTION: Rechargeable batteries are to be charged only by adults and children 8+ years of age. Persons with reduced physical, sensory or mental capabilities or who lack experience or knowledge should not charge batteries unless they are supervised or have been given instruction concerning the safe use of the AC adapter and understand the hazards involved. You can charge the battery by using the included AC adapter or by connecting the included USB cord to your computer.

Battery Charging in Progress Indication

When the battery is charging, the charge indicator LED will be yellow. When fully charged, it will turn green. It will be OFF if not connected via USB or if not charging.

Repairing or Modifying LEAPPAD3X

Never attempt to repair or modify as LEAPPAD3X does not contain any user-serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.

If the product has been in contact with liquids, punctured, or subjected to a severe impact or fall, immediately remove this product from use and contact LeapFrog Consumer Services. For service information, go to: www.leapfrog.com/support

AC Adapter Safety

CAUTION: Use only the included AC Adapter or the included USB cord with product.

WARNING: Not suitable for children under 3 years. Misuse of included USB Cord or transformer/AC adapter can cause electric shock.

(Note: The word "transformer" is sometimes substituted for the word "adapter." Use only the included LEAPFROG AC power adapter).

- Connection of the transformer to the wall outlet should be performed only by an adult or child 8+ years of age.

• The transformer is not intended to be used as a toy, and the use of the transformer shall be under the full supervision of parents.
• As with all electrical products, precautions should be observed during handling and use to prevent electrical shock.
• The power adapter may become warm during normal use. Always allow adequate ventilation and use care when handling the power adapter.
• Do not connect or disconnect with wet hands.

This device complies with CAN ICES-3(B)/NMB-3(B) and the Canadian Radio Standard Specification RSS-210. The IC term stands for "Industry Canada" followed by the certification number and all the "IC: 4810A-31500" signifies is that the equipment meet the Radio Standard Specification RSS-210. The IC certification number is located on the back of the enclosure.

European Community Compliance Statement

The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0-300 GHz).

This wireless device complies with the R&TTE Directive.

EU Declaration of Conformity

LeapFrog Enterprises, Inc., hereby declares that this Wi-Fi device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Environmental Phenomena

The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when the interference stops. If not, it may become necessary to turn the power OFF and then back ON.

In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by turning the power OFF and then back ON.

Copyrighted Software

Certain software included in this product contains copyrighted software that is licensed under the General Public License (GPL). A copy of that license is included at http://www.leapfrog.com/en-us/legal/open-source.html. Anyone may obtain from us the complete corresponding source code for the software covered by the GPL for a period of three years after our last shipment of this product by contacting LeapFrog customer service at [e-mail]. Please write "GPL source code for LEAPPAD3X" in the subject line of your email. We reserve the right to charge a reasonable fee to cover the costs of shipping and the physical media on which the source code is loaded.

- The transformer should be periodically examined for conditions that may result in the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug, blades, housing or other parts, and in the event of such conditions, the transformer must not be used until the damage is repaired. The cord of this transformer cannot be replaced; if the cord is damaged, dispose of the transformer in accordance with your local electrical product recycling regulations.

Unplug the USB Cord or the AC Adapter if any of the following conditions exist:

• The USB cord or the power cord or plug has become frayed or damaged.
• The power adapter is exposed to rain, liquid, or excessive moisture.
• The power adapter enclosure has become damaged.
• You suspect the power adapter needs service or repair.
  To clean USB cord or AC Adapter, disconnect it from computer or wall and clean with a cloth dampened with water. Do not immerse in water or use soap or other chemicals. Allow to dry before reusing. Do not connect USB cord to computer or AC adapter to outlet if wet or damaged.
• This USB cord can be used to recharge the single cell Li-Poly battery of the LeapFrog LEAPPAD™3X device.

⚠ WARNING: DO NOT recharge non-rechargeable batteries.

For Europe - The toy must be used with a transformer for toys. AC Adapter Electrical Ratings: Input: - 120VAC, 60Hz (for US); - 230VAC, 50Hz (for UK or EU); \~ 240VAC, 50Hz (for AS/NZL) Output—DC5V, 1.5A, 7.5VA

Exposure to Radio Frequency Energy

LEAPPAD3X contains a radio transmitter and receiver. When powered ON, LEAPPAD3X sends and receives radio frequency (RF) energy through its internal antenna. The exposure requirements use units of measurement termed SAR (specific absorption rate). LEAPPAD3X has been tested and found to meet the SAR exposure requirements for Wi-Fi operation as established by FCC, IC, and European Union guidelines. The highest SAR value as reported to the authorities for this tablet PC model when tested for use against the body is 0.29 W/kg.

The tablet PC has been tested when positioned at 0 mm from the body, without any metal parts in the vicinity of the tablet PC and when properly used with an appropriate LeapFrog Accessory.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

TM & © 2014 LeapFrog Enterprises, Inc. All rights reserved. Tous droits réservés. leapfrog.com/leappad

LeapFrog Enterprises, Inc.

6401 Hollis Street, Suite 100 Everanville, GA 04608

Emeryville, CA 94008 (800) 701-LEAP (5327)

Item numbers: 81500/81501

Part Number: 605-12202-C

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifications to this unit not expressly approved by LeapFrog could void the EMC and wireless compliance and void the user's authority to operate the equipment. This product demonstrated EMC compliance using compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables to reduce the possibility of causing interference to radios, televisions, and other electronic devices.

USB Cable. The USB cable provided with this product complies with FCC and other regulatory Emission limits. If using other than the provided USB cable, please note that in order not to exceed FCC and other regulatory emissions limits, a shielded cable must be used.
L'appareil est conforme appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1. Cet appareil ne doit pas causer d'interférences nuisibles.
2. Cet appareil doit tolérer toutes les interférences reçues, y compris les interférences pouvant entraîner un fonctionnement indésirable.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Certification

U.S. Model: 31500/31510

Canada Model: 31500/3151 CAN ICES-3(B)/NMB-3(B)

Contains IC: 4810A-31500

E.U

Canadian Compliance

Manufacturer's declaration: product meets the requirements of the applicable EC directives.