HEV615W - Humidifier HONEYWELL - Free user manual and instructions

Brand	Honeywell
Model	HEV615W
Product type	Cool mist evaporative humidifier
Tank capacity	6.4 liters (1.7 gallons)
Power supply	120 V, 60 Hz, 43 W
Mist output control	Low, Medium, High
Built-in humidistat	Yes, adjustable from 30% to 69% RH
Auto shut-off	Yes, when tank is empty
Timer	No (HEV615 model)
Filter	Honeywell Type T wick filter (ref. HTF600 / HTF600C)
Filter replacement frequency	Every 30 to 60 days depending on water quality
Fill indicator	Yes, orange light
Filter check indicator	Yes, after 30 days of use
Cleaning	Weekly: descaling with white vinegar, disinfection with bleach
Recommended room size	Medium-sized room (not specified, estimated 40-50 m²)
Noise level	Quiet on low, fan audible on high
Warranty	3-year limited
Dimensions (approx.)	30 x 28 x 43 cm (not provided, estimate)
Weight (approx.)	4.8 kg (not provided, estimate)
Country of manufacture	China

Frequently Asked Questions - HEV615W HONEYWELL

How to install the float arm?

Remove the water tank. Align the float arm with the shape in the bottom of the cavity, then place the float stem over the hooks and press firmly until you hear a click. Gently lift the stem to check that it is securely locked in place.

Why don't I see mist coming out of the humidifier?

This is normal. Evaporative humidification produces invisible mist. Dry air passes through the saturated wick filter, the moisture evaporates and is diffused by the fan without visible fog.

How to set the desired humidity level?

Press the △ (increase) or ◆ (decrease) buttons to choose a level between 30% and 69%. Once the level is reached, the blue 'Humidity Reached' light turns on and the unit automatically shuts off.

How often should I clean the humidifier?

We recommend weekly cleaning: descale with undiluted white vinegar (20 minutes) and disinfect with a bleach solution (1 teaspoon per 3.8 L of water, 20 minutes). Rinse thoroughly after each step.

When should I replace the wick filter?

The filter should be changed every 30 to 60 days, depending on water hardness and usage. Replace it if it becomes hard, emits odor, or reduces moisture output. Use only a Honeywell Type T filter (ref. HTF600).

What if water does not flow into the cavity?

Check that the float arm is correctly installed (see question 1). Make sure the piston under the tank is not stuck: gently push it to check its free movement.

Can I add essential oils to the water?

No, never add essential oils, perfumes, or medications to the tank or base. This would damage the unit and void the warranty.

How to reset the filter check indicator?

The orange 'Check Filter' light turns on after 30 days. To reset it, press and hold the corresponding button for 2 seconds. The count restarts from zero.

What if the humidifier leaks from the base?

This is often due to a poorly installed float arm or a damaged piston. Check the arm installation. If the piston is damaged or sticky, contact customer service at 800-477-0457.

How to store the humidifier at the end of the season?

Completely empty the tank and cavity. Remove the filter and discard it (or store dry if new). Allow all parts to air-dry before packing. Store in a cool, dry place.

USER MANUAL HEV615W HONEYWELL

• Evaporative humidification means you will NOT see the moisture output.
• With evaporative humidification, a fan pulls dry air from the room through the saturated wicking filter. Moisture from the wicking filter evaporates and is pushed into the room with the help of the fan.
• Evaporative humidification adjusts moisture output to the amount of moisture the air can hold. The drier (less humid) the air in the room, the more moisture the humidifier will add to the air. An evaporative humidifier cannot add more moisture to the room than the air can hold. The amount of moisture the air can hold depends on many factors including relative humidity level, temperature and size of room.

White textured rectangular block with no visible text or symbols

Filter

• A wicking filter is required for this unit to operate (one included)
• The wicking filter will help to capture minerals from your water and will help to prevent white dust (calcium deposits from hard water)
• If you have hard water, you will need to replace your filter more frequently
• See “Caring for your Filter” section for tips on prolonging the life of your wicking filter

Two Honeywell electric heaters side by side, one open and one closed, both with visible internal cooling fans (no text or symbols on the devices themselves)

Humidity Level

• The ideal indoor humidity level is 40-60%
- Use a Honeywell humidity monitor (HHM10 or H10C) to check your indoor humidity level (not included)

SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS HUMIDIFIER

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following:

1. The humidifier should always be placed on a firm, flat, waterproof surface at least four feet (1.2 m) away from bedside, twelve inches (30 cm) from the wall, and out of reach of patients, children and pets.
2. Be sure the humidifier is in a stable position and the power cord is away from heated surfaces and out of the way to prevent the humidifier from being tipped over.
3. Before using the humidifier, extend the cord and inspect for any signs of damage. DO NOT use the unit if the cord has been damaged.
4. The humidifier has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
5. CAUTION: To avoid fire or shock hazard, plug the humidifier directly into a 120V AC electrical outlet. To avoid risk of fire, shock or personal injury DO NOT use an extension cord or power strip.
6. Shut off and unplug humidifier before moving. The humidifier should always be unplugged and emptied when not in operation or while being cleaned. DO NOT move or tilt humidifier while it is in operation. Plug and unplug humidifier with dry hands. NEVER pull by cord.

7. When moving or lifting the full Water Tank, use two hands; one hand on the Tank Handle and the other on the bottom of the Tank.

8. DO NOT add any medications, inhalants, scented products or essential oils into Base, Water Reservoir or Water Tank.

9. DO NOT cover or insert objects into any openings on the humidifier.
10. DO NOT block intake or output vents.
11. DO NOT operate the humidifier without water. Turn off and unplug unit when Tank is empty.
12. Humidifier requires regular cleaning. Refer to, and follow, cleaning instructions.
13. DO NOT operate outdoors; this appliance is intended for indoor use.
14. DO NOT attempt to repair or adjust any electrical or mechanical functions on this humidifier. Doing so will void your warranty.
15. For residential use only.

SAVE THESE INSTRUCTIONS

GETTING TO KNOW YOUR HUMIDIFIER

How It Works:

Water is released into the Reservoir when the Float Paddle engages the Plunger at the bottom of the water tank. A Wicking Filter absorbs water from the Reservoir. A fan pulls dry air from the room into the humidifier where it passes through the saturated Wicking Filter. The filter captures minerals and other impurities from the water, before the moisture is evaporated back into the dry room with the help of the fan. The amount of moisture output depends on many factors, including the current room humidity and temperature. As the humidity level in the room increases, the moisture output decreases, which prevents over humidification.

Components

1 Grill
2 Control Panel
3 Housing
4 Tank Cover
5 Tank Handle
6 Water Tank
7 Tank Feet
8 Plunger (under tank)
9 Filter Cartridge
10 Reservoir
11 Base
12 Float Paddle
13 Locking Knob
14 Filter Cartridge Handle
15 Wicking Filter
16 Filter Cartridge Door
17 Air Input Grill

SETTING UP YOUR HUMIDIFIER

Unpack the Humidifier

Keep this instruction manual for reference.

1. Remove packaging materials. Locate Float Paddle and set aside. This is required for operation.

2. Remove twist tie and extend power cord. Place on a firm, level, water resistant surface a minimum of 12 inches (30 cm)

Float Paddle Installation – required for humidifier to operate

This humidifier uses a float system to regulate the water flow from the Tank to the Reservoir. The Float Paddle must be properly installed for the unit to operate. If not properly installed, water may not flow into the Reservoir or it may leak from the Base. The Float Paddle is designed to be easy to install and remove.

CAUTION: Improper placement of the Float Paddle could result in leaking or water not feeding to the Reservoir.

1. Remove Water Tank.
2. Line up Float Paddle with the float paddle shape on the bottom of the Reservoir.
3. Place Float Rod over the Brackets and press firmly until you hear it click into place.
4. Pull gently up on the Float Rod to be sure it doesn't pop out of the Brackets.
5. Place Water Tank back in Base.

FILLING/REFILLING THE WATER TANK

DO NOT ADD ESSENTIAL OILS to the water tank. Doing so could cause damage to the humidifier and void the warranty.

This humidifier holds a maximum of 1.7 gallons (6.4 liters) of water.

FILLING/REFILLING THE WATER TANK (CONTINUED)

The Tank can be filled in two ways:

Option 1: At the Humidifier

Option 2: At the Sink

Both filling options can be performed with or without the Tank Cover in place. Be sure to replace the Cover before using the humidifier to keep objects and debris out of the water.

Note: Ensure the Float Paddle has been placed correctly in the Reservoir before filling. See Float Paddle Installation instructions if necessary

Consumer assumes all responsibility for property damage resulting from improperly filled humidifier.

Option 1: To Fill Tank at the Humidifier

1. Pour cool water from a pitcher or jug directly into the Water Tank. It is not necessary to remove the Tank Cover. DO NOT overfill.

⚠️ CAUTION: DO NOT pour water into the Grill

Option 2: To Fill Tank at the Sink

1. Grasp Tank Handle and pull Tank forward to remove from Base. Carry Tank to sink.
2. Remove Tank Cover if desired. Tank may also be filled through the openings in the Tank Cover.
3. Fill Tank with cool water. DO NOT overfill. Replace the Tank Cover if it was removed.
4. Carry Water Tank back to humidifier and replace on Base.
   CAUTION: Use care when handling Water Tank to avoid unnecessary impact. Banging or dropping the Water Tank could result in damage to the Tank that may cause leaking.

USING YOUR HUMIDIFIER – HEV620

HEV620 Digital Display

Key

A. Power
B. Moisture Output
C. Humidity Control
D. Timer
E. Check Filter
F. Refill

Power

1. Plug humidifier into a 120V outlet.
   CAUTION: To avoid electric shock, DO NOT plug humidifier into outlet with wet hands.
2. Press Power Button ⏻(A).

Humidifier will turn on to high output and high humidity settings. Press again to turn off. If humidifier was programmed before turning off, previous settings will be remembered. Unplugging the humidifier resets to default settings.

Moisture Output

1. Press the Moisture Output button ⚙(B) to toggle through low, medium, and high moisture output settings.

A higher setting will provide more moisture output. The fan will pull more moisture off the Wicking Filter and into the air. The water level in the Water Tank will decrease faster with a higher setting, since more moisture is going into the air.
A lower setting will provide less moisture output. The fan will run quieter, and the Water Tank will not have to be filled as frequently, since less moisture is going into the air.

NOTE: While the humidifier is operating, you will hear the fan running but will not see the moisture output. This is normal for an evaporative humidifier.

Humidity Control

1. Press the Humidity Control arrows (C) to set the desired humidity level.

To scroll through the numbers faster, press and hold the arrow for 3 seconds.

Release the button once the desired level is shown. Display will blink three times showing the SET humidity level, then the display will return to show the current room humidity level.

CURRENT will illuminate on the display to indicate the current room humidity level.

USING YOUR HUMIDIFIER – HEV620 (CONTINUED)

The humidistat can be set between 30%-69%. Below 30%, LO will illuminate on the display to indicate the minimum humidity level. Above 69%, the display will show HI to indicate the maximum humidity level is set.

NOTE: The % number displayed on the control panel represents the relative humidity (RH) as measured at the Humidistat sensor. The relative humidity in your room may vary from the number displayed on the humidifier. To measure the RH level in your room, consider using a Honeywell humidity monitor (HHM10 or H10C) that can be moved around in the room.

Humidity Reached (US models only)

When the set humidity level is reached HUMIDITY REACHED will appear on the display and the humidifier will turn off. As long as HUMIDITY REACHED is illuminated, the fan will not run.

Once the humidity level drops below the set level, HUMIDITY REACHED will disappear and the humidifier will start running again.

To increase the set humidity level, press the Humidity Control arrows

Timer

Press the Ⓤ button (D) to set the Timer to 4, 8 or 12 Hours.

NOTE: Humidifier will continue to cycle on and off to maintain the set humidity level while the Timer is set. At the end of the timed cycle, the humidifier will power off, regardless of the humidity setting. Any time the humidifier is manually turned off (with the power button or by unplugging) the timer will reset to OFF setting.

USING YOUR HUMIDIFIER – HEV615

HEV615 Push Button Control

Key

A. Power
B. Moisture Output
C. Humidity Control
D. Check Filter
E. Humidity Reached
F. Refill

Power

1. Plug humidifier into a 120V outlet.

CAUTION: to avoid electric shock, DO NOT plug humidifier into outlet with wet hands.
2. Press Power button ⏻(A).

Humidifier will turn on to high output and high humidity settings. Press again to turn off. If humidifier was programmed before turning off, previous settings will be remembered. Unplugging the humidifier resets to default settings.

Moisture Output

1. Press the Moisture Output buttons ⚙- or ♣+ (B) to adjust the moisture output level accordingly.

A higher setting will provide more moisture output. The fan will pull more moisture off the Wicking Filter and into the air. The water level in the Water Tank will decrease faster with a higher setting, since more moisture is going into the air.

A lower setting will provide less moisture output. The fan will run quieter, and the Water Tank will not have to be filled as frequently, since less moisture is going into the air

Humidity Control

1. Press the Humidity Control buttons - or + (C) to set the desired humidity level.

It is recommended to run the humidifier on the highest humidity level for at least an hour, or until a comfortable humidity level is reached.

Then adjust the Humidity Control button down until the Humidity Reached Indicator light illuminates and the humidifier turns off. This is your desired humidity level. The humidifier will turn on and off to maintain this setting.

Humidity Reached

When the set humidity level is reached, the blue Humidity Reached indicator (E) will illuminate, and the humidifier will turn off. As long as this light is illuminated, the fan will not run. Once the humidity level drops below the set humidity level, the blue light will turn off, and the humidifier will start running again. To increase the set humidity level, press the ⬆+button.

INDICATOR LIGHTS (ALL MODELS)

Refill

When the Water Tank is empty, the humidifier will automatically shut off and the orange Refill Indicator (F) will illuminate. Turn off the humidifier and refill the Tank. See Filling/Refilling Water Tank on previous pages.

NOTE: If the humidifier will not be used for more than a few days, empty the water from the Water Tank and Water Reservoir and dry out the Filter to prevent growth of bacteria or mold.

Check Filter

After 30 days the orange Check Filter indicator will illuminate to remind you to check your Wicking Filter. Remove the Filter Cartridge from the back of the humidifier, and check to see if it needs to be replaced. To reset this light, press and hold the Check Filter button for 2 seconds. If humidifier is unplugged, the 30 day counter will start over.

CARING FOR YOUR FILTER

To remove the filter

CAUTION: Filter may be saturated with water. Remove slowly to give filter time to drain before removing. This will help prevent dripping on your floor or other surfaces.

1. Pull the Filter Cartridge Handle straight up slowly, listening for water dripping from the filter.
2. With the Cartridge fully removed, flip the Cartridge Door open.
3. Remove the filter, and either:

a. Flip top to bottom to ensure the top does not dry out OR b. Replace with a new filter.

To prolong the life of your Wicking Filter, turn it over each time you fill the Water Tank. This will keep the top of the Filter from drying out and will help the Filter to age more evenly.

If you notice the Filter getting hard, you may soak it in cool water to loosen mineral buildup. This will temporarily improve performance of the Wicking Filter until a replacement Filter is purchased.

DO NOT attempt to clean the Wicking Filter with vinegar, soap or any chemical solutions. Doing so may damage the Filter.

It is recommended you change your Wicking Filter every 30-60 days depending on water quality and usage. If you have hard water, you may need to replace your Filter more frequently. Change your Filter if you notice:

• The Filter is hard and crusty
• The Filter starts to give off an odor
- Moisture output is decreased

CARING FOR YOUR FILTER (CONTINUED)

Be sure to use only genuine Honeywell Replacement Filters which are Protec ^10 antimicrobially treated. It helps prevent the migration of mold, algae and bacteria on the filter.

However, the Filter still needs to be replaced regularly. Humidifier Filters and accessories require replacement and are not covered under warranty.

Find replacement filters at retailers or at www.HoneywellPluggedIn.com

Replacement Filter HFT600 or HFT600C

CLEANING YOUR HUMIDIFIER

To keep your humidifier running efficiently, clean it regularly. Weekly cleaning is recommended. All maintenance should be done in the kitchen or bathroom on a water resistant surface near a faucet.

To properly clean your humidifier we recommend the separate processes of Scale Removal and Disinfecting. These two processes must be performed separately.

Before Cleaning

1. Turn off and unplug humidifier. NEVER clean the humidifier when it is running.
2. Remove Water Tank and Tank Cover. Empty water from Tank.
3. Remove Wicking Filter. Pull the Filter Cartridge Handle straight up slowly, listening for water dripping from the filter.

CAUTION: Filter may be saturated with water. Remove slowly to give filter time to drain before removing. This will help prevent dripping on your floor or other surfaces.

1. Remove Housing from Base.

a. Turn Locking Knob to the right toward the unlock symbol.
b. Lift Housing from the Base and set aside.

1. Holding the Base, empty water from the Reservoir.

CLEANING YOUR HUMIDIFIER (CONTINUED)

Scale Removal

Follow steps 1-5 in Before Cleaning section, then follow the additional steps below

Note: Filter must be removed from humidifier before cleaning; DO NOT clean Filter with vinegar.

1. Pour a minimum of 3 cups (.7 liters) of undiluted distilled white vinegar in the Water Tank. Gently swish vinegar around in the Tank to wet entire inside of Tank.
2. Place Tank on Base. Vinegar will drain into the Water Reservoir and loosen mineral buildup (scale) in the Reservoir and bottom of the Water Tank. There should be enough vinegar to cover the bottom inside of the Tank.
3. Soak for 20 minutes, then remove Water Tank and slowly empty vinegar into sink. Rinse with tap water until the smell of vinegar is gone.
4. Remove Float Paddle from Reservoir by lifting up on Float Rod and set aside. Wipe Float Paddle and Reservoir area with a soft cloth to remove loosened minerals.
5. Empty vinegar from Base and Reservoir area; rinse with water until the smell of vinegar is gone.
6. Place Float Paddle back in Reservoir, ensuring Float Rod is secured in brackets. For detailed instructions, refer to the Float Paddle Installation section.
   CAUTION: Improper placement of the Float Paddle could result in leaking or water not feeding to the Reservoir.

CLEANING YOUR HUMIDIFIER (CONTINUED)

Disinfecting

Follow steps 1-5 in Before Cleaning section, then follow the additional steps below.

Filter must be removed from humidifier before cleaning. DO NOT clean Filter with bleach solution.

Note: Bleach may stain clothes. It is recommended that you wear rubber gloves during this process to protect your hands.

1. Add 1 teaspoon of bleach to 1 gallon (3.8 L) of water. Pour the bleach solution into the Tank.

Note: Using more than 1 teaspoon of bleach to 1 gallon (3.8L) of water may result in damage to the humidifier.

1. Place Tank on Base. Bleach solution will drain into the Water Reservoir.
2. Soak for 20 minutes, then remove the Water Tank and slowly empty bleach solution into sink. Rinse Tank with tap water until the smell of bleach is gone.
3. Remove Float Paddle from Reservoir by lifting up on Float Rod and set aside.
4. Empty bleach solution from Base and Reservoir area; rinse with water until the smell of bleach is gone.
5. Place Float Paddle back in Reservoir, ensuring Float Rod is secured in brackets. For detailed instructions, refer to the Float Paddle Installation section.

CAUTION: Improper placement of the Float Paddle could result in leaking or water not feeding to the reservoir.

CLEANING YOUR HUMIDIFIER (CONTINUED)

Reassembling

After descaling and disinfecting, follow these steps to reassemble the unit:

1. Place Housing on Base.
2. Turn Locking Knob to the left toward the lock symbol.
3. Ensure Float Rod is secured in brackets. For detailed instructions, refer to Float Paddle Installation section.

CAUTION: Improper placement of the Float Paddle could result in leaking or water not feeding to the Reservoir.

1. Place Tank on Base. Replace Tank Cover.
2. Install Filter Cartridge in back of Housing. See Caring for Your Filter section for tips about changing and maintaining your Wicking Filter.

End of Season Cleaning and Storage

Follow the cleaning instructions when the humidifier will not be used for at least one week, or at the end of the season.

At the end of the season, remove any accessories and discard. Allow the humidifier and all components to dry completely before storing.

DO NOT store humidifier with water inside the Reservoir or Water Tank.

Pack unit safely and store in cool, dry location.

TROUBLESHOOTING
If your humidifier is not working properly, refer to the following:

Problem Possible Cause Solution
Humidifier shuts off	Set Humidity level has been reached	Increase Moisture Output setting. See Using your Humidifier section
	Water Tank is empty	Fill the Tank with Water
	Timer has expired (HEV620 only)	Turn on humidifier by pressing the Power button. Set Moisture Output and Humidity Control. See Using your Humidifier.
Water is not draining into Reservoir	Float Paddle not installed correctly	See Float Paddle Installation instructions in Setting Up Your Humidifier
	Plunger is stuck	Push and release Plunger to be sure it is moving freely
Water leaking from Base or Reservoir	Float Paddle is not installed correctly	See Float Paddle Installation instructions in Setting Up Your Humidifier
	Plunger is damaged	Contact Consumer Relations
	Plunger is sticking	Push and release Plunger to be sure it is moving freely
	Plunger may have foreign material stuck under the Tank Gasket	At sink, push and release Plunger system so water may flow.
	Tank is cracked	Inspect tank for damage; contact Consumer Relations

TROUBLESHOOTING (CONTINUED)

Problem Possible Cause Solution
Tank and Base are slimy Need to clean See Caring for your Humidifier
Odor coming from Grill	Filter needs to be replaced	Replace with Honeywell HFT600 replacement wicking filter
Water drips on floor when removing filter	Saturated wicking filter removed too quickly	Remove Filter Cartridge slowly to allow excess water to drain
Fan is running but water level is not going down	Filter is clogged with mineral deposits	Replace with Honeywell HFT600 replacement wicking filter
	Relative humidity level in room is too high	If running humidifier in closed room, open doors to ventilate

For additional troubleshooting help, call Consumer Relations at 800-477-0457.

ACCESSORIES

To help you get the most out of your humidifier experience, consider these helpful accessories:

Honeywell Replacement Wicking Filter

Treated with Protec ^® antimicrobial layers to help prevent growth of mold on the filter.

Honeywell HFT600 or HFT600C

Humidity Monitor

Displays relative humidity and room temperature so you can maintain a comfortable humidity level in your home.

Honeywell HHM10 or H10C

Protec Cleaning Ball or Fish

Keeps your humidifier cleaner longer. Kills up to 99% of odor causing bacteria.

Protec PC1, PC2, and PC1F

For Canada only: Protec PC-1C and PC1FC

Available at retailers or www.HoneywellPluggedIn.com.

CONSUMER RELATIONS

For questions, technical support or to order replacement parts, contact Consumer Relations.

Call us toll-free at: 800-477-0457

Hours: Mon-Fri 8:00AM-7:00PM EST

Email: [e-mail]

Or visit our website at: www.HoneywellPluggedIn.com

Please be sure to specify Model number HEV615 or HEV620.

SPECIFICATIONS

Electrical rating: 120V, 60 Hz., 43 Watts

Capacity: 1.7 gallons (6.4 liters)

If you experience a problem, please contact Consumer Relations. Do not return this humidifier to the original place of purchase.

DO NOT attempt to open the motor housing or tamper with the product yourself.

Doing so may void your warranty and cause personal injury or damage to the product.

3 YEAR LIMITED WARRANTY

You should first read all instructions before attempting to use this product.

A. This 3 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.

B. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship.
C. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.
D. This warranty does not cover the filters, pre-filters, UV bulbs or other accessories (if included) except for material or workmanship defects.

Call us toll-free at 800-477-0457 or e-mail: [e-mail]

Please be sure to specify a model number located on the box and the back and bottom of your unit.

NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.

Two anthropomorphic air purifiers with ventilation grilles, one white and one gray, displayed against a white background (no text or symbols visible on the devices themselves)

Filtre

Two NEYWELL air purifiers with transparent lids, one white and one gray, shown from different angles (no visible text or symbols on the devices themselves)

Filtro

© 2017 All Rights Reserved.

Kaz USA, Inc., a Helen of Troy Company

Marlborough, MA 01752

Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited. Honeywell International Inc. makes no representation or warranties with respect to this product.

Distributed by: Kaz Canada, Inc., a Helen of Troy Company,

6700 Century Avenue, Suite 210, Mississauga, Ontario L5N 6A4

To contact us call 1 800 477-0457 or visit our website at www.HoneywellPluggedIn.com

For Responsible recycling, please visit:

www.RecycleNation.com

Made in China.

www.RecycleNation.com

Hecho en China.