AS 200.4 - Receiver Mosconi - Free user manual and instructions

Product Type	4-Channel Car Audio Amplifier (Receiver)
Model	AS 200.4
Brand	Mosconi
Number of Channels	4
Power Output	50W RMS x 4 @ 4Ω, 100W RMS x 4 @ 2Ω
Bridged Power	200W RMS x 2 @ 4Ω
Frequency Response	10 Hz – 30 kHz (±1 dB)
Total Harmonic Distortion	< 0.05%
Signal-to-Noise Ratio	> 95 dB
Damping Factor	> 200
Input Sensitivity	0.2V – 5V
Crossover	Low-pass (variable 50-500 Hz), High-pass (variable 50-500 Hz), Band-pass
Bass Boost	0-12 dB @ 45 Hz
Input Connectors	RCA (4 pairs)
Output Connectors	Speaker terminals (2 per channel)
Remote Control	Optional (wired remote bass control)
Protection Features	Thermal, short circuit, overcurrent
Dimensions (W x L x H)	250 x 180 x 50 mm
Weight	1.8 kg
Power Supply	12V DC (10-16V)
Fuse Rating	40A
Country of Origin	Italy
Warranty	24 months from date of purchase

Frequently Asked Questions - AS 200.4 Mosconi

How do I connect the Mosconi AS 200.4 amplifier?

Connect power (12V DC) to the B+ terminal, ground to GND, and remote turn-on to the REM terminal. Use RCA cables for input and speaker wires for output. Ensure proper fuse ratings (40A).

Can I bridge channels on the AS 200.4?

Yes, channels 1-2 and 3-4 can be bridged for more power. Use positive from one channel and negative from the other. Minimum impedance bridged: 4Ω.

How do I set the crossover filters?

The amplifier has low-pass, high-pass, and band-pass filters. Adjust the frequency dials (50-500 Hz) and select the filter mode via switches for each channel pair.

What is the input sensitivity range?

Input sensitivity is adjustable from 0.2V to 5V. Set it to match your head unit's output to avoid distortion.

Does the AS 200.4 come with a remote control?

No, the remote control (bass knob) is optional and can be purchased separately. It connects to the designated port on the amplifier.

What are the protection features?

The amplifier protects against thermal overload, short circuits, and overcurrent. If triggered, the power LED will turn off or blink.

What is the recommended fuse size?

Use a 40A fuse on the power wire near the battery for proper protection.

How do I clean and maintain the amplifier?

Keep the amplifier dry and clean. Use a soft cloth to wipe the surface. Ensure ventilation grills are free from dust.

Can I use this amplifier with a 4-ohm subwoofer?

Yes, you can use a 4-ohm subwoofer on a bridged channel pair (200W RMS) or on a single channel (50W RMS).

Where is the Mosconi AS 200.4 manufactured?

It is designed and manufactured in Italy by MOS.

USER MANUAL AS 200.4 Mosconi

IMPORTARY, LECOETE ALIMENTARE TO LIBERTO DIUSO A FINES ESERCIE CARRITA SICUERZZA DI CHI OPERA. USSTALIZAZO E DI CHI UNITIZAPPRODITO WHATTO LESI DIESE GERVAUCHSALTEN SEAVI DUCH. UN SUCH SELBT MALL MEI OBETENTELIS AND PUNIONE DESIS PRODUCKS VERITARIUTI MAOCHEB. BEPOLEN IS ALLE HINNISES DAET DE SCHEDER CES INSTALIZATION AND DES GEBAROUS DES PRODUCKS WITH ALL THE CONTROLS AND FUNCTIONS OF THIS PRODUCT FOLLOW ALL NOTICES ENSTRUIRE THE SAFETY OF THOSE INSTALINGS AND USING THE PRODUCT. WITH ALL THE CONTROLS AND FUNCTIONS OF THIS PRODUCT FOLLOW ALL PRODUCTS. CARROTLY READ THIS MANUAL TO FAMILSIZE YOURSELF IMPORTARY. CARROTLY READ THIS MANUAL TO FAMILSIZE YOURSELF

OWNER'S MANUAL WARNINGS WARBARRY CARD

Client	Automated Dealer	Product
Name		Model
Address		Serial Number
Email & Phone

VOSO production (24 months) MOSCON per 24 most delta data of acquisition data and some resumption in net documenta fiscal data acquisition (securities basis for obligations and a portion in case of the nonperformable cost of maintenance). The product is necessary to be the product certificate, copy or template as a liquid stampable suit apparatus to be necessary. VOSO man is responsible for eventual care solution a personcne the use of implementation (modestil MOSCON) a case of quasi coagulose.

VOS extends a security to MOSCON products for 24 months from the date of the original purchase as amended in the appropriate tax and in the original purchase receipt. Endose the date purchase receipt when sending the product for return or repart to the authorized dealer.

A specific number of purchases must correspond by the same stamped or the returned product.

VOS is not responsible for diseseps or injury caused by improper rehabilitation or approval of the product.

Designed and Manufactured in Italy by MOS - www.mosconi-system.it - www.mosconi.org

REMOTE CONTROL (optional) Connect the remote control (optional) lateral to the connected Remote control (optional) Connect the remote control (optional) lateral to the connected Remote control (optional) Connect the remote control (optional) lateral to the connected Remote control (optional) Connect the remote control (optional) lateral to the connected Remote control (optional) Connect the remote control (optional) lateral to the connected Remote control (optional) Connect the remote control (optional) lateral to the connected Remote control (optional) Connect