AS 300.2 - Receiver Mosconi - Free user manual and instructions

Product Type	2-Channel Car Audio Amplifier
Brand	Mosconi
Model	AS 300.2
Amplifier Class	Class AB
RMS Power (4 Ohms)	150 W x 2
RMS Power (2 Ohms)	300 W x 2
Bridged Power (4 Ohms)	600 W x 1
Frequency Response	10 Hz - 30 kHz
Signal-to-Noise Ratio	> 100 dB
Input Sensitivity	0.2 V - 6 V
Crossover Filters	Low-Pass (50 Hz - 500 Hz), High-Pass (15 Hz - 500 Hz)
Bass Boost	0 - 12 dB at 40 Hz
Remote Control	Bass level remote cable included
Inputs	2 x RCA, High-level speaker input
Outputs	2 x Speaker terminals, 1 x RCA pre-out
Power Supply Voltage	12 V DC (11 - 15 V)
Dimensions (L x W x H)	200 mm x 150 mm x 50 mm
Weight	1.5 kg
Protection Circuits	Short circuit, thermal overload, over-voltage
Maintenance	Clean with a dry, soft cloth; avoid solvents
Safety	Install by a qualified professional; disconnect battery before servicing
Spare Parts & Repairability	Contact authorized Mosconi dealer; no user-serviceable parts inside
General Information	Designed for high-performance car audio systems; compatible with most head units

Frequently Asked Questions - AS 300.2 Mosconi

What is the RMS power output of the Mosconi AS 300.2 at 4 ohms?

The Mosconi AS 300.2 delivers 150 watts RMS per channel at 4 ohms, with a total of 300 watts RMS in stereo mode.

Can the AS 300.2 be bridged?

Yes, the amplifier can be bridged to mono operation, delivering 600 watts RMS into a 4-ohm load.

What type of crossover filters does it have?

It features adjustable low-pass and high-pass filters, with a frequency range of 15-500 Hz, allowing flexible tuning.

Is a remote bass control included?

Yes, the amplifier comes with a wired remote bass level controller for convenient adjustment from the driver's seat.

What is the recommended power supply?

The amplifier requires a 12V DC power supply (11-15V range) and should be connected directly to the car battery with appropriate fusing.

How do I clean and maintain the amplifier?

Use a dry, soft cloth to wipe the exterior. Avoid using liquids or solvents, and ensure the cooling fins are free of dust.

What protection features does it have?

The AS 300.2 includes short circuit, thermal overload, and over-voltage protection to safeguard the unit.

Can I use high-level speaker inputs?

Yes, the amplifier accepts high-level input (speaker wire) in addition to RCA inputs, making it compatible with factory head units.

Where can I find spare parts or service?

Spare parts and service are available through authorized Mosconi dealers. Do not attempt to open the unit yourself.

What are the dimensions and weight?

The amplifier measures 200 x 150 x 50 mm and weighs approximately 1.5 kg, compact enough for under-seat installation.

USER MANUAL AS 300.2 Mosconi

IMPORTARY, LECOETE ALIMENTARE TO LIBERTO DIUSO A FINES ESERCIE CARRITA SICUERZZA DI CHI OPERA. USSTALIZAZO E DI CHI UNITIZAPPRODITO WHATTO LESI DIESE GERVAUCHSALTEN SEAVI DUCH. UN SICH SELBT MALL MEI OBETENTELIS AND PUNIONE DESIS PRODUCKS VERITARIUTI MAOCHEB. BEPOLEN IS ALLE HINNISES DAVI DE SICHERAT EN INSTALIZATION AND DES GEBAROUS DES PRODUCKS WITH ALL THE CONTROLS AND FUNCTIONS OF THIS PRODUCT FOLLOW ALL NOTICES FOR USING THE SAFETY OF THOSE INSTALINGS AND USING THE PRODUCT.

OWNER'S MANUAL WARNINGS WARBARRY CARD

Client	Automated Dealer	Product
Name		Model
Address		Serial Number
Email & Phone

VOSO production (24 months) MOSCON per 24 most delta data of adequate discounts and measures depreciation in net documenta fiscal data acquisition (securities basis for obligations and a portion in case of interest expense available to the media). The product is necessary for the production of the products, including the product certificate, copy contracts and a quote stampable suit apparatus to be necessary. VOSO man is responsible for eventual care solution a personc the use of implementation (modestil MOSCON is a case of quasi coagulose).

VOS extends a warranty to MOSCON products for 24 months from the date of the original purchase as amended in the appropriate tax and in the original purchase receipt. Endose the date purchase receipt when sending the product for return or repart to the authorized dealer.

A copy number must be used to purchase must correspond by the same stamped or the returned product.

VOS is not responsible for diseseps or injury caused by improper dislocation or disposal of the product.

Designed and Manufactured in Italy by MOS - www.mosconi-system.it - www.mosconi.org