KUDR25SHWH1 - Dishwasher KITCHENAID - Free user manual and instructions
Find the device manual for free KUDR25SHWH1 KITCHENAID in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Width (cm) | 60 |
| Height (cm) | 85 |
| Depth (cm) | 57 |
| Weight (kg) | 45 |
| Power supply | 220-240 V / 50 Hz / 10 A |
| Water consumption (L/cycle) | 9.5 |
| Energy consumption (kWh/cycle) | 0.92 |
| Capacity (place settings) | 14 |
| Noise level (dB) | 44 |
| Wash programs | Auto, Quick 30 min, Eco, Intensive, Glass, Basket cleaning |
| Special functions | Delayed start (1-12 h), Half load, Child safety, AquaStop |
| Installation type | Built-in under counter |
| Color | White (black control panel) |
| Tub material | Stainless steel |
| Energy class | E (former class A+) |
| Repairability index | 8.2 / 10 |
| Cleaning and maintenance | Washable filter, removable spray arms, cleanable door gasket |
| Manufacturer warranty | 2 years |
| Brand | KitchenAid |
| Model | KUDR25SHWH1 |
Frequently Asked Questions - KUDR25SHWH1 KITCHENAID
How to install my KitchenAid KUDR25SHWH1 dishwasher?
Make sure the location is level and that the water supply and drainage are properly connected. Follow the installation guide provided with the manual. For built-in installation, respect the niche dimensions: 85x60x57 cm (HxWxD).
Why does my dishwasher not start?
Check that the door is properly closed and that a program is selected. Make sure the water supply tap is open and that the fuse or circuit breaker has not tripped. Consult the error code table in the manual.
How to clean the dishwasher filters?
Remove the lower basket, unscrew the cylindrical filter and clean it under running water. Also clean the flat filter. Put everything back correctly. Regular cleaning prevents bad odors.
How much regenerating salt should I use?
Fill the salt reservoir until it is full (about 1 kg). Use specific dishwasher salt. The salt indicator light comes on when the level is low.
How to use the delayed start function?
Select a program, then press the Delayed start button to set the desired time (from 1 to 12 hours). The appliance will start automatically at the programmed time.
What to do in case of water leakage under the dishwasher?
Immediately shut off the water supply and electricity. Check the connections and seals. If the leak comes from the AquaStop system, contact a professional. Do not use the appliance again until repaired.
How to activate or deactivate the child safety lock?
To activate, press and hold the Programs and Delayed start buttons simultaneously for 3 seconds. An audible signal confirms activation. Repeat the operation to deactivate.
Why does the dishes come out wet at the end of the cycle?
Use a rinse aid to improve drying. Check that the rinse aid compartment is full. Select a program with extra drying if available.
What is the duration of the quick program?
The Quick 30 min program is designed for lightly soiled dishes and lasts about 30 minutes. The wash temperature is lower to save time.
Where can I find spare parts for this model?
Spare parts are available from KitchenAid authorized dealers or on the official website. The repairability index of 8.2/10 indicates good parts availability.
User questions about KUDR25SHWH1 KITCHENAID
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual KUDR25SHWH1 - KITCHENAID and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KUDR25SHWH1 by KITCHENAID.