PRA100 - Range hood Premier - Free user manual and instructions

Product Type	Range Hood
Brand	Premier
Model	PRA100
Width	60 cm
Depth	50 cm
Height	15 cm (without duct)
Weight	Approx. 12 kg
Power Supply	230 V ~ 50 Hz
Motor Power	150 W
Extraction Capacity	Up to 600 m³/h
Noise Level	45 dB (low speed) – 65 dB (high speed)
Lighting Type	LED
Speed Settings	3
Controls	Button panel
Filter Type	Aluminum grease filter (washable)
Carbon Filter	Optional, for recirculation mode
Duct Diameter	150 mm
Energy Class	A
Safety Features	Auto shut-off, thermal protection
Maintenance	Clean grease filters monthly; replace carbon filters every 3-6 months
Spare Parts	Grease filters, carbon filters, LED bulbs
Warranty	2 years

Frequently Asked Questions - PRA100 Premier

What are the dimensions of the Premier PRA100 range hood?

The width is 60 cm, depth 50 cm, and height 15 cm (without duct). Always measure your space before installation.

How do I install the PRA100 range hood?

Installation should be done by a qualified professional. Ensure the hood is above the cooktop at least 65 cm (electric) or 75 cm (gas). Use the included mounting kit and follow the manual.

How often should I clean the grease filter?

Clean the aluminum grease filter every month or more often if you cook frequently. It is dishwasher safe, but hand washing with mild detergent is recommended.

How do I replace the carbon filter?

The carbon filter (optional) should be replaced every 3-6 months depending on usage. Remove the grease filter, slide out the old carbon filter, and insert the new one.

What is the noise level of this range hood?

The noise level ranges from 45 dB on low speed to 65 dB on high speed. It is moderately quiet for a standard range hood.

Can I use the PRA100 in recirculation mode?

Yes, it can be used in recirculation mode with an optional carbon filter. The air is filtered and returned to the kitchen.

What type of lighting does it have?

It features LED lighting, which is energy-efficient and provides bright illumination for your cooking area.

How do I change the light bulb?

The LED lights are built-in and not user-replaceable. If they fail, contact a service technician.

What is the warranty period?

The Premier PRA100 comes with a 2-year warranty covering manufacturing defects. Keep your purchase receipt.

Where can I buy spare parts?

Spare parts such as grease filters and carbon filters are available from authorized Premier dealers or online. Use only genuine parts.

USER MANUAL PRA100 Premier

1. Thank you for choosing our cooker hood. Please read the instruction manual carefully before use.

2. The installation work must competent fitter.

3. The manufacturer disclaims injury caused as a result of not installation contained in the

The cooker hood is used on 22

(2)FEATURE

1. The cooker hood uses high quality materials, and is made with a streamlined design.
2. Equipped centrifugal with a large power grease filter leaf, it produces strong and easy to clean.
3. With the isolated low voltage input, the lights are therefore sa
4. Special wind tunnel construction dirt will be absorbed in a second.

(3). Installation

3.1 The cooker hood should be placed at a dis of 65-75cm (26-30inch) from the cooking surface the best effect. See Pic

3.2 Install the hook installation height is

fixed position of the place of chimney.

3.3 Fix the extensible direction and way, the hook. S ee pic 3.

1. 4 Put the glass according to the way on the cooker hood, and then lead the extensible pipe outside of the inside chimney to the position fix on it by screw, here should be freely. See Pic 4.

2. 5 Put the two chimneys together adjust the height of the inside chimney inside chimney body with safety to the inside chimney Note: The two safety screw. See Pic pos

diameter of 6mm.

(4) NOTICE OF INSTALLATION

1. Before installation, please ensure the area is clean to avoid suction of the remaining bits
2. It cannot share the same air appliance such as gas tube, w
3. The above wall. bending the start of ventilation point and should
4. After grease installation, collection make at one sure end.

Pic5

(5) SAFETYWARNING

✧ Keep your children from using the cooker hood.

✿ Your cooker hood is for domestic use and other commercial use.

✿ Any installation work must be carried person.

The cooker hood and its filter mesh in good working order.

Before cleaning, always ensure that

✿ Clean the cooker hood according to hood from the danger of burning.

✿ N o fire for drying your cooker hood.

If there is any fault with your cooker appointed by agent for servicing.

✧ Please keep the room draughty when

Do not exhaust the gas from cooker for the gas from gas hob and other kitchen

Before installation and usage, read a voltage (V) and the frequency (Hz) i same as the voltage (V) and the frequency

In order to get the most out of your cook manual before installing & using, and

✿ Ensure that you could get our guarantee warranty card and purchase receipt,

✿ CAUTION: Accessible parts may be appliances.

(6 6)SpeSpedbjutramntSSeqpjtatness

Electronic BButton

1. Push runs at the low low speed. button, Push the it indica again

2. Push the middle button, the motor runs at mid speed. Push

3. Push the high button, the indi on high speed. Push it again

4. Push the light button; the ind lighting lamps will come on. turn off.

Indicatorlight ① ② ③ ④

Pic6A

(7) MAINTENANCEE

7.1 The cleaning of the carbon-grease filter mesh

The filter mesh is made of high-densit use the corrosive detergent on the appliance running correctly. below.

Method and soak 1: Put the mesh into 40-5 for 2-3 mins. Wear glov Please do not apply too much p will damage easy. Method 2: If instructed to do so, the temperature at around 60 de

7.2 Notice of cleaning geokkerhood

hood

A. To time, non protect the corrosive cooker the main hood detergent body should every fi

B. Please do not use abrasive body.

C. Keep the motor and other spare will cause damage to the appliance

D. Before cleaning the appliance power

E. The carbon filter shouldn't

F. Please don't tear open the

G. If the plug or cord is damaged, soft cord.

8.Abnormity andSolution

Fault	Cause		Solution
Light on, but motor does not work	The leaf blocked		Get rid of the block
	The capacitor damaged		Replace capacitor
	The motor jammed bearing damaged		Replace motor
	The internal a bad smell from th		Replace motor
Light does not wor motor does not wor	Beside the above mentione
	Light damaged	Replace lights
	Power cord	Connect the electric
Oil leakage	One way valve ventilation tightly sealed	Take down valve and seal with
	Leakage from of U-shaped cover	Take U-shaped down and seal or paint
Shake of	The leaf damaged shaking	Replace the leaf
	The motor is not tightly hanged	Lock the motor
	The body is not hanged	Fixed the body
Insufficient	The distance body and the gas	Readjust
	Too much open doors	Choose a resemble
The machine	The fixing screw enough	Tighten the screw and ma horizontal
	The hanging screw enough	Tighten the screw and ma horizontal