DD-6200 - Cassette player SHERWOOD - Free user manual and instructions
Find the device manual for free DD-6200 SHERWOOD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Double Cassette Deck |
| Brand | Sherwood |
| Model | DD-6200 |
| Dimensions (W x H x D) | 430 mm x 130 mm x 300 mm |
| Weight | 5.0 kg |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 15 W |
| Playback Speed | 4.76 cm/s (standard) |
| Wow and Flutter | < 0.08% WRMS |
| Frequency Response | 30 Hz - 18 kHz (standard tape) |
| Signal-to-Noise Ratio | 60 dB (Dolby B on) |
| Total Harmonic Distortion | < 0.5% |
| Heads | 2 playback / 1 record / 1 erase (permalloy) |
| Motor | DC servo motor |
| Auto Reverse | Yes (both decks) |
| Dolby Noise Reduction | Dolby B |
| Inputs | Line in (RCA), Microphone (1/4" jack) |
| Outputs | Line out (RCA), Headphone (1/4" jack) |
| Additional Features | Continuous play, relay recording, pitch control |
| Spare Parts Availability | Belts, pinch rollers, heads, idler tires (aftermarket) |
| Maintenance | Clean heads and pinch rollers with isopropyl alcohol |
| Safety Precautions | Avoid moisture, use stable voltage, unplug when not in use |
Frequently Asked Questions - DD-6200 SHERWOOD
How do I clean the playback heads?
Use a cotton swab lightly moistened with isopropyl alcohol (90% or higher). Gently rub the heads, pinch roller, and capstan. Allow to dry fully before using.
Why is the sound distorted or muffled?
Dirty heads are the most common cause. Clean them as described. Also check if the tape is old or damaged. If the problem persists, the belts may need replacement.
How do I replace the drive belt?
Open the case by removing screws. Note the belt path, then remove the old belt. Install a new belt of the correct size (typically square cross-section). Reassemble and test.
Does it support Dolby noise reduction?
Yes, the DD-6200 features Dolby B noise reduction. Engage it via the front panel button for compatible tapes.
Can I record from a microphone?
Yes, there is a 1/4' microphone input on the front. Connect a dynamic microphone and adjust recording level with the control knob.
Why does the tape not play or rewind?
This is usually due to a broken or stretched belt. Replace the belt. Also check if the idler tire is hardened; if so, replace it.
What is the correct tape speed?
Standard cassette speed is 4.76 cm/s. If the pitch sounds wrong, the motor speed may need adjustment via the internal trim pot.
How do I adjust the recording level?
Use the recording level knob on the front panel. Aim for peaks that reach around 0 dB on the VU meter for best fidelity without clipping.
Can I connect it to a computer?
No direct USB connection. Use the line out RCA jacks to connect to a computer's line input or a USB audio interface for digitizing tapes.
Where can I find spare parts?
Aftermarket belts and pinch rollers are available from online retailers like eBay or specialized tape deck repair shops. Search for 'Sherwood DD-6200 belt kit'.
User questions about DD-6200 SHERWOOD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cassette player in PDF format for free! Find your manual DD-6200 - SHERWOOD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DD-6200 by SHERWOOD.