CD256 - CD Player CURTIS - Free user manual and instructions

USER MANUAL CD256 CURTIS

1. Press the TUN DN BUTTON or TUN UP BUTTON briefly to tune in the desired radio station manually.

2. Keep the TUN DN

3. Reap the TON-BN-LOT-TON or TON-OF-LOT-TON depressed for more than 1 second will activate the auto-tuning function of the digital tuner. When a radio station of sufficient strength

is found, auto-tuning will stop automatically and the radio station will be tuned in. The Frequency

Reading of the radio station will be displayed on the LCD Panel. When a FM stereo program is being received, the STEREO INDICATOR will appear.

1. Adjust the VOLUME CONTROL to obtain the desired sound level.

2. Slide the BASS BOOST SWITCH to 'ON' for enhanced bass effect of the radio program.

3. When you wish to turn the Digital Tuner 'OFF', set the CD/RADIO SWITCH to, the "CD"

4. When you position

Storing and Recalling Radio Stations in Preset Memory

The digital tuner has a capacity of 10 preset stations for both AM and FM bands which allow you to stop and receive frequency AM or FM radio stations at the touch of a button.

to store and recall your favourite AM or FM radio stations at the touch of a button.

A. To Store a Station

1. Tune in the station you want to store in preset memory by manual or auto tuning.

2. Press the MODE/MEM (CLOCK SET) BUTTON and the MEMORY INDICATOR

3. Press the MODE/MEM (CLOCK SET) BUTTON and the MEMORY INDICATOR will flash in the LCD panel for 5 seconds.(Press again for cancel)

4. Before the flashing stops, press MEM UP or MEM DN BUTTON to select channel

no. #1 to #10, press the MODE / MEM (CLOCK SET) BUTTON again to store the current radio station into the preset memory.

1. Repeat steps 1 to 3 to store a radio station into the rest of the Preset Memories.

B. To Recall a Station

Press MEM UP or MEM DN buttons to recall #1 to #10 preset stations.

NOTES - The headphone cord works as a FM antenna. To insure maximum FM tuner

sensitivity, always keep the headphone cord fully extended. Do not wind or fold the headphone cord while listening to the radio.

I told the headphone cord while listening to the radio. When tuning in AM reception, he ever to place the unit in a horizontal

When tuning in AM reception, be sure to place the unit in a horizontal position. For maximum AM sensitivity, keep turning the unit slowly while

keeping it horizontal until the best reception is obtained.

DISC PLAYING

This CD player is designed to play the 8cm and 12cm compact disc without using adaptor

Hold Switch

Hold Switch Set the HOLD button to "ON" position, all the buttons will be locked. Before operation, be sure

to set the switch to "OFF" position, for normal operation.

Getting Start

1. Insert the headin

2. Push the OPEN button to right side, and then the door open

with label side upward.

1. Push the disc gently around the centre area until it clicks so that the disc fits into the pivot.

(To remove the disc: Pick up the disc, holding the edge, while pressing the pivot gently.)

1. Close the door and press the PLAY/PAUSE button once.

2. The Display will show the total number of tracks of the disc, then begin to play the first track.

General Operation

Play/Pause Buttons ▶■ — Press once to start playback in the original order. Press again to stop the disc play temporarily.

Stop Button ■ Press again to stop the close play temporarily. — Press once to stop playback.

Press again to turn off power

Skip / Search Buttons 🖱️ 🖼️ — Press once to skip to next track ▶for back to previous track 🖼️

— Press continuously to search forward

▶▶ or backward ◀◀◀.

Directory UP Button

Various Playing Modes

MODE/PROG Button — There are 3 kinds of functions : (FOR CD)

A. Repeat Play

During PLAY mo

- Press the MODE/PROG button once to play the current track repeatedly.

• The repeat indicator will appear in the display.

During PLAY mode Press the MOD

• The repeat indicator will appear in the display.

NOTE: Temporary REPEAT air

NOTE - To cancel REPEAT simply press the MODE/PROG button until the repeat indicator disappears.

B. Random Play

During PLAY mode

- Press the MODE/PROG button 3 times. - The SHUE will appear in the display.

• Press the PLAY button, all the tracks on a disc to be played in a random sequence and after

all tracks are played, system will stop automatically.

NOTE - To cancel RANDOM PLAY simply press the MODE/PROG button until the SHUF

indicator disappears.

C. Intro Scan

• Press the MODE/PBOG button 4 times

• The INTRO indicator will appear in the d

- Press the PLAY button to play the first 10 seconds of each track on the disc.

NOTE - To cancel INTRO SCAN simply press the MODE/PROG button until the INTRO

— E4 — E3 — — E5 —

CAUTION

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. THIS SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCERT QUALIFIED

THIS SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.

[Non-Text]

IMPORTANT: Since movement of the CD mechanism and the sensitive circuitry may cause

interference to the radio tuner nearby, switch this unit off while operating other

radio devices.

PREPARATIONS BEFORE USING

Battery Installation

1. Open Battery Compartment cover.

2. Insert 2 batteries (LR6, "AA" size, or equivalent)

In the correct polarity as indicated.(Batteries not included)

(Heavy duty batteries are recommended.) 3. Close the cover properly

1. Close the cover property

AC Power Adaptor

1. Plug the DC output of the adaptor to the DC Jack.

2. Connect the adapter (A 5V/600mA) to answer

3. Connect the adaptor (4.5V/600mA) to a power outlet.(Adaptor not included) Make sure the voltage is compatible

Name sets the Vantage to companies

SETTING DUAL CLOCK

1. Set CD/RADIO SWITCH to CD position

2. Press BAND (DUAL CLOCK) BUTTON to choose Clock "1"

3. Press MODE/MEM (CLOCK SET) BUTTON, the display will blink. Then press TUN

UP (HR) OR TUN DN (MIN) BUTTON until the desired time is shown.

1. Press MODE/MEM (CLOCK SET) BUTTO

2. To set Clock "2", repeat above steps 3 to 4

3. To check the time press BAND (DUAL CLOCK) BUTTON to choose between Clock "1"

or "2" time display

NOTE - i). Clock "1" displays the current home time.

ii). Clock "2" displays the time of a city/country in a different time zone other than

the home city/country.

iii). Clock '1' and '2' display the same MINUTE. For Clock '2 only otherwise the minute of Home Time will be changed

only otherwise the minute of home time will be changed.

RADIO RECEPTION

1. Insert the plug of your headphone into the PHONE JACK.

2. Set the CD/RADIO SWITCH to "Radio" and press the BAND (DUAL CLOCK) BUTTON

for the AM or FM radio band as shown on the LCD Panel. The frequency reading will be

MODE/PROG button - there are 3 kinds of functions: (FOR MP3 DISC)

A. Repeat Play

1. During PLAY mode

- Press the MODE/PROG button once to play the current track repeatedly. - The repeat indicator will appear in the display.

The repeat indicator

1. During PLAY mode
2. Press the MODE/BLOG button twice to play the current DIRECTORY repeatedly

• Press the MODEL HOG button twice to play the current. • The reneat indicator will appear in the display.

1. During PLAY mode

• Press the MODE/PROG button three times to play the ENTIRE DISC repeatedly.

• The repeat indicator (ALL) will appear in the display.

NOTE - To cancel REPEAT simply press the MODE/PROG button until the repeat indicator

disappears.

B. Random Play

During PLAY mode Press the MODE/B

- Press the MODE POG button 4 times. The SHUIF will appear in the display.

• Press the PLAY button, all the files on a disc to be played in a random sequence and after

all files are played, system will stop automatically.

NOTE - To cancel RANDOM PLAY simply press the MODE/PROG button until the SHUF

display disappears

C. Intro Scan

During PLAY mode Press the MOD

• The INTRO indicator will appear in the

• Press the PLAY button to play the first 10 seconds of each file on the disc.

NOTE - To cancel INTRO SCAN simply press the MODE/PROG button until the INTRO

indicator disappears.

PROGRAM PLAY (FOR CD)

1. In stop mode, press the MODE/PROG button to make program memory.

2. "PGM CD 00 P-01" will be displayed, "00" means track number to memory and "P-01"

means program number.

1. Press 📄 or 📌 button to select the desired track.

2. Press the MODE/PROG button to enter the track into memory, the program numbers which will be increment one step

* The program no. "P-01"

1. Repeat step 3 and 4 until memory is full.

2. Press ▶ button to start the program p

3. To stop the program play, press the STOP button.

4. For program play in step "7", press the MODE/PROG button & ▶■ button.

5. To erase the program memory, TURN off the power or open the door.

PROGRAM PLAY (FOR MP3 DISC)

1. In stop mode, press the MODE/PROG button to make program memory.
2. "PGM 00 000 P-01" will be displayed. "00" means DIRECTORY number, #000# means 4% number, IP 015 means program number
3. "000" means file number, "P-01" means program thumb
4. Press the ASP/DIB button to select the desired directory
5. Press is button to select the desired file.
6. Press the MODE/PROG button to enter the DIRECTORY and file into memory.
   The program number which will be increment one step.
   * The program no. "P-01" has become "P-02" on display.
7. Repeat step 3 to 5 until memory is full (UP TO 60 FILES).
8. Press ▶ button to start the program play.
9. To stop the program play, press the STOP button.
10. For program play in step "8", press the MODE/PROG button & ▶■ button.
11. To press the program memory, turn off the power or open the door.
12. To erase the program memory, turn on the power of open the door. * If you do not need to select directory, only select files, the above step 3 can pass

- You do not need to order directory, only available digital anti-shock operation

The DIGITAL ELECTRONIC SHOCK PROTECTION function uses semiconductor memory to prevent the second from skipping when the unit is subjected to shocks and vibration during play. When the PLAY/PAUSE button is pressed and the power turns on, the Digital Electronic Shock Protection function turns on automatically.
It will give approximately 40 seconds (MP3 120 seconds) of protection against interruption of sound output, if the player is subjected to shocks of more than 40 seconds duration, some interruption of sound output will occur, this is normal and to be expected, the sound will resume once the player has stabilized from the shock.

BBS (BASS BOOST SYSTEM) FUNCTION

Set the BBS button to on position to enhance the bass effect.

PRESET EQUALIZER FUNCTION

Press the EQ button activates 4 Kinds of sound effect as follows:
CLASSIC → ROCK → JAZZ → POP
* The EQ indicator will appear on the display.

MAINTENANCE

Cleaning the Lens

If the lens becomes dusty, clean it with camera lens blower. Be careful not to scratch the surface

Cleaning the Cabinet

From time to time, clean the cabinet with a soft dry cloth. For more stubborn stains, slightly moisten the cloth with water or a mild detergent solution. Never use benzene, alcohol or other solvents as they may damage the finish of the cabinet.

SPECIFICATIONS

RADIO:

Frequency range : AM 520 - 1710kHz (STEP: 10kHz)
FM 87.5 - 108MHz (STEP: 50kHz)
Output Power: 20mW 82 Breset stations: AM x 10, EM x 10
Fiesel stations . AM X TO, FM X TO EM antenna : Headphone cord
AM antenna : Headphone cord AM antenna : Ferrite bar (BUILT-IN)

CD:

Output Power: 20mW≥32) Ω
Freq. Response : 100 - 20000 Hz
Power source : 2 x UM-3 or "AA" size batteries
4.5V (600mA) AC-DC at Dimensions: 122mm(310 x 128mm(D) x 22mm(U))

** For improvement purposes, specification and design are subject to change without

notice. *

TROUBLE SHOOTING GUIDE

Cleaning the Disc

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out.

Note - Do not use solvents such as benzine, thinner, commercially available cleaners or anti-

static spray intended for analogue discs.

** Should you experience difficulties in the use of this player please refer to the following chart before contacting your dealer or the place of purchase.

Troubleshooting Guide
Problem	Powers to check
Plays/falls to function	• The disc may be inserted upside down. • The disc not corrected correctly on the chalk. • Delay or a defective disc. • Only pick up tens. • Paper lid not closed. • Wire condensation allows the player to warm up to room temperature for 240 minutes. • AC Power to an adapter switched off. • Auto power off has occurred, press PUTF buttons to restore power. • Wear batteries. • Hold switches at ON position, switch to OFF phone.
To sound from Employees	• Echoreas plug and flatty inserted into the Phones socket.
To sound when played through an engine amplifier	• Connection is encoded. • Power to be external amplifier not switched on. • Only or defective disc. • Only pick up tens. • The plate is subject to excessive vibration or shock. • Low battery power. • Poor Earphone connection.

-E6-

-E7-

- E8 -