WPM40 - Popcorn machine Waring Pro - Free user manual and instructions

Product Type	Popcorn machine
Model	WPM40
Brand	Waring Pro
Dimensions (H x W x D)	Approximately 18 x 12 x 12 inches
Weight	Approximately 10 lbs
Power Supply	120V, 60Hz, 1400W
Capacity	4 oz (popcorn kernels per batch)
Popping Method	Hot air (air popper)
Main Functions	Popping popcorn, butter melting tray
Construction Material	Plastic housing with metal interior
Safety Features	Automatic shut-off, cool-touch exterior
Maintenance & Cleaning	Removable kernel tray, wipe with damp cloth
Spare Parts	Replacement kernel tray, measuring cup
Repairability	User-replaceable parts; contact Waring for service
General Information	Includes measuring cup and butter melting tray

Frequently Asked Questions - WPM40 Waring Pro

How do I clean the popcorn machine?

Unplug the machine and allow it to cool. Remove the kernel tray and wipe the interior with a damp cloth. The exterior can be cleaned with a mild detergent. Do not immerse in water.

Can I use oil in this popcorn machine?

No, the Waring Pro WPM40 is an air popper and does not require oil. Adding oil may damage the machine or cause a fire hazard.

What type of popcorn kernels should I use?

Use standard popping corn kernels. Avoid using flavored or pre-buttered kernels as they may clog the machine.

Why is my popcorn not popping?

Ensure the machine is plugged in and the power switch is on. Kernels should be fresh and dry. Old or moist kernels may not pop properly.

How much popcorn does the WPM40 make per batch?

The machine has a capacity of 4 oz of kernels, which yields approximately 12 cups of popped popcorn.

Is the butter melting tray dishwasher safe?

The butter melting tray is top-rack dishwasher safe. However, hand washing is recommended to prolong its life.

Does the machine have an automatic shut-off?

Yes, the WPM40 features an automatic shut-off to prevent overheating. It will turn off after the popping cycle completes.

Can I use the machine continuously?

Allow the machine to cool for at least 10 minutes between batches to avoid overheating and ensure longevity.

Where can I find replacement parts?

Replacement parts such as the kernel tray or measuring cup can be ordered from Waring Pro's website or authorized dealers.

What is the warranty for this popcorn machine?

The Waring Pro WPM40 comes with a 1-year limited warranty against defects in materials and workmanship.

USER MANUAL WPM40 Waring Pro

WPM40

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR POPCORN MACHINE.
2. Do not touch hot surfaces. Always use handles or knobs to operate.
3. To avoid any risk of electrical shock, do not immerse cord or plug into water or other liquid.
4. This appliance should not be used by or near children, or individuals with certain disabilities.
5. Unplug main power cord from outlet while not in use and before cleaning.
6. Allow HOT parts to cool down before maneuvering.
7. Do not operate the appliance with damaged cord or plug, or after the appliance malfunctions or has been damaged in any matter. Send the unit to the nearest authorized service center for examination, repair or adjustment. (ONLY technicians should open up the unit.)
8. The use of any accessories or attachments not recommended by the manufacturer may cause injury.
9. Do not pop the kernels with a dry kettle (without oil).
10. Do not immerse popping kettle into water.
11. Kettle surface is HOT and should NOT be touched during popping or just after use.
12. Unplug, allow to cool, clean and cover the unit and store in a dry and safe place if not being used for a long time.

13. Do not let power cord hang over edge of table or counter or touch any hot surfaces.

14. Do not place the unit on or near a hot gas or electric burner or in a heated oven.

15. Extreme caution must be paid when moving the appliance containing hot oil or other hot liquids.
16. Turn ALL switches to OFF position before disconnecting power plug from the wall supply outlet.
17. Not recommended for outdoor use.
18. Do not use appliance for other than intended use.
19. To avoid overheating, always add oil and then kernels before operating.
20. Extreme caution must be used when unloading popcorn. Always place the unit over a countertop so that residual hot oil or water running out will not cause burns.
21. KEEP OUT OF REACH OF CHILDREN.
22. DO NOT CLEAN USING ANY ABRASIVE MATERIAL.
23. NEVER FORCE ANY PARTS OR BRACKETS INTO POSITION.
24. NO PARTS ARE INTENDED FOR THE DISHWASHER.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

PARTS

1. Housing
2. Kettle, Attachment Pins
3. Door
4. Tray (removable)
5. Door Panel (removable)
6. Kettle Lid
7. Light/Warmer
8. Stirrer
9. Measuring Spoons and Scoops

ASSEMBLING PROCEDURE

Technical line drawing of a mechanical device with a circular motion arrow indicating rotational motion (no text or symbols)

FIGURE 1

Screw the lips, axle fixer and stirrer onto the gear box.

Technical line drawing of a mixing machine with a central bowl and side arm (no text or labels)

FIGURE 3

Insert the pin through the kettle and supporter.

FIGURE 5

Finally, insert the internal kettle plug into the socket on the inner top of the popcorn housing.

Technical line drawing of a mechanical device with an upward arrow indicating motion or force (no text or symbols present)

FIGURE 2

Hold the kettle on the supporter.

Simple line drawing of a mechanical component with motion lines and arrows, no text or symbols present

FIGURE 4

Use the retaining pin to fix kettle at the right position.

Diagram showing two views of a plug with an arrow indicating upward motion (no text or symbols)

POPPING INSTRUCTIONS

1. Make sure the popcorn maker is unplugged before you do any of the following.
2. Before using the unit, please check carefully if voltage (120V - 60 Hz) is suitable to your home.
3. Clean the internal surface of the kettle with warm sudsy water, rinse well and dry with a clean cloth. Wipe down inner and outer housing with damp cloth.
4. Main unit has 2 function switches as follows:
   – Light/warmer combination

5. POP switch to turn heater and stirrer on

6. Hook the kettle onto the hanger of the main unit.

7. Plug the power cord into an electric outlet.

8. Insert the internal plug into the socket (see figure 5, previous page).

9. Turn the light switch to the On position and the POP switch to the On position. The stirrer will begin to rotate in the kettle. Let the stainless steel kettle preheat about 1 to 2 minutes. Open lid and add oil (1 tablespoon of vegetable, corn, peanut, or safflower oil). Immediately add 12 cup of corn kernels and close lid to the kettle.

Caution: Lid might be hot – it is recommended to use an oven mitt.

1. Popcorn starts popping out through the lid after about 2 minutes. Yields up to 12 cups per batch in less than 212 minutes.

2. When unit is finished popping – you will no longer hear the corn popping – immediately turn POP switch to the Off position and rotate the roller bar of the kettle down to release any remaining popcorn in the popper. This will also stop the remaining popcorn from cooking any further and avoid possible burning.

3. The light/warmer may be left in the On position.

4. Keep POP switch Off if the unit is not continuously in use.

5. Keep only the Light/Warmer switch on.

6. Remove plug from power supply if the unit is not being used.
7. Repeat steps 7 to 10 for continuous popping.

CLEANING AND MAINTENANCE

It is strongly recommended to clean the kettle frequently to avoid burning excess oil onto the bottom of the inner pot.

After using the popcorn machine, use a wet cloth to clean the main unit, main body and glass. It is strongly recommended to wash and dry the tray after each use to avoid any bacteria buildup.

LIGHT/WARMER

The light/warmer bulb can be replaced with a 120V, 60W maximum bulb only.

QUICK CLEANING PROCEDURE

Turn the POP control to Off. Pour 5 to 8 ounces of water (NO detergent is necessary) into inner pot. Switch to On to boil the water and let the stirrer turn in order to remove excess oil stuck on the surface. Pour out the water into a deep bowl and discard after about 1 to 2 minutes of boiling.

CAUTION: THE KETTLE IS HOT.

Or, remove the kettle and clean it with a Scotch-Brite ^® scouring pad. Do not immerse kettle or electrical plug in water.

Any other trademarks or service marks of third parties herein are the trademarks or service marks of their respective owners.

©2008 Waring Products

Division of Conair Corporation

150 Milford Road

East Windsor, NJ 08520

www.waringproducts.com

Printed in China

WPM40 IB

08WR100