KELVINATOR KL13TT2 - Washing machine

KL13TT2 - Washing machine KELVINATOR - Free user manual and instructions

Find the device manual for free KL13TT2 KELVINATOR in PDF.

📄 10 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice KELVINATOR KL13TT2 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Twin Tub Washing Machine
Brand Kelvinator
Model KL13TT2
Washing Capacity Up to 6 kg (estimated)
Spin Capacity Up to 6 kg (estimated)
Water Pressure Range 0.03 - 0.6 MPa
Wash Program Selection Standard, Strong, Gentle
Wash Timer Up to 15 minutes
Spin Timer Up to 5 minutes
Drain Selector Drain, Strong, Standard positions
Water Inlet Top fill via water inlet switch
Lint Filter Removable and cleanable
Safety Cover Yes (press to activate spin)
Earthing Requirement 3-pin socket with proper earthing
Power Supply 220-240 V, 50 Hz
Special Features Spiral water flow, foam-removing spinning, hand washing mode
Noise Level Low noise motor design
Accessories Included Drain hose, water inlet hose
Maximum Water Temperature 50 °C (forbids water over 50°C)
Usage For various fabrics; refer to weight guide

Frequently Asked Questions - KL13TT2 KELVINATOR

How do I clean the lint filter?
Press the groove and remove the filter. Clean under water when lint is wet, then reinstall by pressing the upper part into the frame.
What should I do if the machine does not start?
Check power supply, plug connection, and ensure the pulsator is not twisted. Also verify the water inlet switch is set correctly.
How can I prevent water from freezing inside the machine?
After each wash, drain the water completely. If frozen, pour water below 50°C into the wash tub to soak and gently turn the pulsator until drain works.
Can I use bleach in this washing machine?
Yes, but fill water first, then add bleach. Do not pour bleach directly on clothes. Use according to bleach instructions and avoid on fading fabrics.
How do I change the drain hose direction?
Lay the machine on a soft object with face down. Remove hose from fixing groove, then reinsert along the tub grooves following steps 1-3. Ensure hose is not kinked.
What causes abnormal noise during spinning?
Unevenly distributed clothes, foreign objects like coins or hairpins, or the machine not being level. Rearrange clothes and check the spin tub.
How do I use the hand washing feature?
Select the hand washing program on the wash selector. It improves washing ability by gentle action. Fill water to desired level before adding clothes.
What is the recommended spin time for different fabrics?
Bedsheets/blankets: 4-5 min; knitwear: 2-4 min; sweaters: 1-2 min; thin clothes: under 1 min. Adjust based on fabric type.
How should I install the washing machine?
Place on a level surface away from direct sunlight and heat. Connect inlet hose (max pressure 0.6 MPa), ensure proper earthing, and lay the drain hose with max height 1.2 m for pump models.
What safety precautions should I take?
Unplug before cleaning or moving. Do not put hands in tub while operating. Keep away from children. Do not repair yourself; contact service agent. Use only 50°C water max.

User questions about KL13TT2 KELVINATOR

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Washing machine in PDF format for free! Find your manual KL13TT2 - KELVINATOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KL13TT2 by KELVINATOR.

USER MANUAL KL13TT2 KELVINATOR

Please read and keep this manual for correct maintenance and operation of this washing machine

BEFORE USING

Content

Before using

Name of part 1

Attention 2

Installation and adjustment ..... 3

Main functions 4

Preparation before washing.....4

Using process

Washing attentions 5

Use of detergent....5

Washing sequence....6

After using....8

Clean lint filter....8

Clean machine....8

When the remained water is frozen..8

Trouble-shooting....9

Features:

Spiral strong water flow, wash more clean.

New wash mode, remove the dirt on the clothes thoroughly.

Multi water level indication, save water and energy.

Rinse and foam-removing spinning, clean and fast.

Name of part

Inlet Control panel Water inlet switch Wash cover Lint filter Wash tub Pulsator Case Plug Base Spin cover Frame Spin tub inner cover Spin tub Water Inlet hose Safety Cover

If the picture of washing machine here is different from the real products, we are not going to change it.

ATTENTION

Warning: In case of the malfunction or breakdown of electrical parts & components, such as power cord, motors, capacitor, a professional after-sale service man must be called for the repairing purpose.

Use 3-phase socket,the earthing should be well connected.KELVINATOR KL13TT2 - ATTENTION - 1Pull out the plug while no power, move or cleaning.KELVINATOR KL13TT2 - ATTENTION - 2If the wire is destroyed, for safe, please ask our after -sale service technician to change or repair it. Keep the pins of the plug clean. KELVINATOR KL13TT2 - ATTENTION - 3
Don't put it at damp place, like bathroom. Never clean it with water. Don't put the wet clothes on the controlKELVINATOR KL13TT2 - ATTENTION - 4The water over 50°Is forbidden.KELVINATOR KL13TT2 - ATTENTION - 5
Don't put your hand into the spin or wash tub while it is working even though it runs very slowly, especially take care of the children.KELVINATOR KL13TT2 - ATTENTION - 6Don't separate it apart, repair or refit it by yourself.KELVINATOR KL13TT2 - ATTENTION - 7
Don't put any hot or heavy object on the machine.KELVINATOR KL13TT2 - ATTENTION - 8The clothes with the volatile materials(such as thinner,fuel) is forbidden to wash.KELVINATOR KL13TT2 - ATTENTION - 9
The children without care or the handicapped are forbidden to use.KELVINATOR KL13TT2 - ATTENTION - 10Keep the machine away from direct sunlight and heat source like the heater.KELVINATOR KL13TT2 - ATTENTION - 11

INSTALLATION & ADJUSTMENT

BEFORE

Please install and adjust your washing machine according to the requirements of the instruction manual. It's important to your safe and correct operation of the washing machine.

The use of drain hose

The hose should drain smoothly

  1. The height of the hose should be less than 10cm, or it can not drain completely(down drain).
  2. Maximum fixation height for hanging the hose(with a hook)over a drain outlet(eg.drain pipe,bath or sink)should not be higher than 1.2metres above the floor.(This is for pump drain model only)
  3. Do not trample or press the hose.

KELVINATOR KL13TT2 - The hose should drain smoothly - 1

KELVINATOR KL13TT2 - The hose should drain smoothly - 2

KELVINATOR KL13TT2 - The hose should drain smoothly - 3

Change the direction of the drain hose

The ex factory installation position of the drain hose is shown in Figure 1.

The hose protrudes out from washing side.

Lay down the machine on the soft object with its face towards the ground. Take the hose out from the fixing groove. (Figure 2)

Along with the groove of the washing tub side, insert the hose with the step 1 to 3 and spread it to the washing side. (Figure 3)

Insert the hose in the groove by hand, do not destroy the hose.

Back Soft object Front

Figure 1
KELVINATOR KL13TT2 - Change the direction of the drain hose - 2

natural_image Technical line drawing of a mechanical assembly with two views (top and side), no text or symbols present.

Figure 2
Technical diagram showing mechanical assembly with numbered parts labeled ①, ②, and ③

Figure 3

MAIN FUNCTIONS

The comprehensive performance of the machine is excellent and its appearance is nice. As to the noise-proof design, the machine uses the enclosed base and low-noise motor which can lower the noise greatly. We assure you will have a quiet world when use it.

1. Rinse and foam-removing spinning

  1. It can remove the extra detergent liquid and save time and water.

2. Hand washing

Hand washing can improve the washing ability.

KELVINATOR KL13TT2 - Hand washing - 1

For up-drain washer, when insert the water into the washing tub, please do not leave until the water level reaches the anticipate level, then turn off the tap.

Preparation before washing

  1. Install the inlet hose. The max water pressure permitted is 0.6mpa, the min is 0.5mpa.
  2. Be sure the earthing is ok and insert the plug. And the earthing should not join with gas pipe or water hose.
  3. Lay down the drain hose. (Down drain)
  4. Put up the drain hose. (Up drain)
  5. Please keep machine level, otherwise it will cause an abnormal sound.

KELVINATOR KL13TT2 - Preparation before washing - 1

natural_image Cartoon illustration of a smiling computer with a plug and connection point (no text or symbols)

Attention before washing

Be sure of the special request of the clothes.

Take coins, sand and hairpins out of the clothes.

Fasten the buttons and the zippers.

KELVINATOR KL13TT2 - Attention before washing - 1

KELVINATOR KL13TT2 - Attention before washing - 2

The quantity of the Clothes should not exceed the rated value. The big clothes like jeans should be put in loosely.

When the pulsator is running, the buttons may cause sound. For safe, put the clothes with button in the middle of the cloth.

KELVINATOR KL13TT2 - Attention before washing - 3

KELVINATOR KL13TT2 - Attention before washing - 4

WASHING ATTENTIONS

● The rated capacity of washing, spinning refers to the max weight of the dry clothes. The weight of the clothes to be washed should be below the rated capacity.
● The capacity will be affected by the thickness, size and type of the clothes.
- If the weight of the clothes is below 2kg, do not select the high water level, so as to prevent splashing of water.

Reference weight

KELVINATOR KL13TT2 - WASHING ATTENTIONS - 1Work clothes (1120g)[C2X8]Pajamas (200g)KELVINATOR KL13TT2 - WASHING ATTENTIONS - 2Shirt (300g)[0026]Undershirt (180g)KELVINATOR KL13TT2 - WASHING ATTENTIONS - 3Blanket (900g)(WZSC)Sock (50g)
KELVINATOR KL13TT2 - WASHING ATTENTIONS - 4Underwear (70g)KELVINATOR KL13TT2 - WASHING ATTENTIONS - 5Jacket (800g)KELVINATOR KL13TT2 - WASHING ATTENTIONS - 6Coat (800g)KELVINATOR KL13TT2 - WASHING ATTENTIONS - 7Jeans (800g)KELVINATOR KL13TT2 - WASHING ATTENTIONS - 8Bedsheet (600g)

USE OF DETERGENT

How to use the bleacher

●Fill the water to the specified level, and pour the bleacher into wash tub.
● The colourful clothes are apt to fade, so the bleacher is forbidden to use.
● The bleacher should not contact with clothes directly.
● The use of bleacher, refers to its instruction.
●The powder bleacher can be used after dissolved.

How to use washing powder

●Dissolved in the tub

  1. Fill small quantity of water..

2.Add some washing powder, run for 30 seconds to dissolve it completely.

  1. Put the clothes in and select the proper water level.

●Quick dissolving

  1. prepare warm water of 30°C and a container.
    2.put the powder in and stir.
    ●The powder is more prone to pollute the clothes than the detergent, therefore please use it with proper quantity.
    ●For different powder, the dosage is different.

WASHING SEQUENCE

USING P

Wash timer Wash selector Drain selector Inlet Spin timer WASH TIMER WASH SELECTOR DRAIN SELECTOR SPIN TIMER

1. Put the water inlet hose into the inlet,move the water inlet switch to wash side.2.Fill the water to the specified level and add dissolved washing powder KELVINATOR KL13TT2 - WASHING SEQUENCE - 23.Put in the clothes, Please add the water if the water is not enough
4.Select the program according to the clothes.5.Select the wash time according to clothes.6.After washing, set the selector to the "drain".

Midway spinning

  1. Put the clothes into the spin tub smoothly.
    2.Spin.

(1) Press the safety cover properly. Even though a few clothes, press the cover too.
(2) Close the spin cover.
(3) Spin for 1-2 minutes.

  1. Rinse and foam-removing spinning

(1) Open the spin cover.
(2) Put the inlet hose into the spin inlet and fill water for 1 minute.
(3) Close the cover, spin for 1-2 minutes.

Diagram showing four stages of a liquid transfer or filtration process with arrows indicating flow direction.

KELVINATOR KL13TT2 - Midway spinning - 2

WASHING SEQUENCE

Rinsing

Rinse(filling water)

  1. Put clothes in the wash tub and select the suitable water flow according to the clothes.
    2.Rinse

Adjust the wash timer to 5-7 minutes to do rinsing.

Rinse with water(Repeat the midway spinning and rinse for 2-3 times.)

  1. Put clothes in the washing tub and select the suitable water flow according to the clothes.
  2. Fill water to the specified level.
  3. Rinse

Adjust the wash timer to 2-3 minutes to do rinsing.

When the weight of clothes is below 3kg, use standard water flow. If you use the strong water flow, it may make water splash.

Spray Rinse

  1. Put the clothes into spin tub.
  2. Move the water inlet switch to spin side.
  3. Select the spin time as proper.
    Notes: You may repeat the above 1\~3 steps to do more than once spray rinse.

Spinning

  1. Put the clothes in spin tub smoothly.
  2. Press the safety cover properly and close the spin cover
  3. Spinning:

Select the spin time according to clothes and do spinning.

While spinning, there may be abnormal sound. It is because clothes are not put properly, please switch it off, and arrange the clothes again.

● While spinning, open spin cover, spinning will stop; Close it, it will resume the spinning.

Selection of spin time

ClothesSpin time(m)
Bedsheet, blanketAbout4~5
Underwear(knitwear)About2~4
Sweater(fabric)About1~2
Thin clothesWithin 1

To do spinning and draining or rinsing(filling water) together, please first do spinning for about 1 minute, then do draining or rinsing, otherwise the spinning will stop owing to too much water stored in the spin tub.

AFTER USING

● After washing, clean the lint and foreign objects on the lint filter and the frame, or it will affect the next use.
● Before cleaning, pull the plug out.

Clean lint filter

● During washing, the lint-filter must be used.
- Be sure to clean it after use.

  1. Take the filter down.

Put your hand on the groove, press it and take it down.

2.Cleaning

When the lint is wet, put it into the water and clean.

  1. Install the filter

After cleaning, insert the filter into the frame, and press in its upper part.

KELVINATOR KL13TT2 - Clean lint filter - 1

KELVINATOR KL13TT2 - Clean lint filter - 2

KELVINATOR KL13TT2 - Clean lint filter - 3

Clean the machine

Clean machine with soft cloth.

Clean with neutral detergent if is too dirty.

Never wash it directly with water.

After washing, take off the water inlet hose.

Pull out the plug, hang up the wire.

Do not keep water in wash tub for a long time.

After washing, drain immediately.

Clean the outside and inside of the machine with soft cloth. Open upper cover and close it again after 1 hour.

Hang up the drain hose well.

Alcohol Petrol Thinner

When the remained water is frozen

Prevent the freezing(after washing, drain water completely)

After complete draining, set the program/drain selector to the strong or standard position. If it is on the drain position, ice is hard to melt When the water is frozen.

Pour water below 50 degree into wash tub to soak. Then turn the pulsator with your hands gently until it can drain, After that, you can use it again.

KELVINATOR KL13TT2 - When the remained water is frozen - 1

TROUBLE-SHOOTING

If there is something wrong with the machine, pull plug out before checking. Some phenomena may be not faults. Before repair, be sure again. If sure, contact with the repair station or after-sale service department. Do not repair by yourself.

PhenomenaReason
The machine dose not workPower is failure or notPlug is in or notPulsator is twisted or not
The draining does not workDrain hose is put down or notDrain hose freezes or notDrain hose is blocked or notThere is clothes outside of spinning tub or not
Abnormal noise during washingThere are hairpins, coins, or metal items in washing tub or not
Abnormal noise and violent vibration during spinningMachine is level or notPress in the safety cover smoothly or notClothes is in the outside of the spinning tub or not.Clothes is too much in the spin tub or not
Some water flows from the drain hose in the first useIt is the water remained in the factory inspection of performance.

NOTE

  1. Maximum pressure allowed at the water inlet: 0.6Mpa
  2. Minimum pressure allowed at the water inlet: 0.03 Mpa
  3. The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.

WARNING

  1. If the supply cord is damage, it must be replaced by the manufacturer or its service agent or similarly qualified persons in order to avoid a hazard.
  2. For washing machine with ventilation openings in the base, that a carpet must not obstruct the opening.
  3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  4. Children should be supervised to ensure that they do not play with the appliance.
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : KELVINATOR

Model : KL13TT2

Category : Washing machine