KL80TT - Washing machine KELVINATOR - Free user manual and instructions

Brand	Kelvinator
Model	KL80TT
Product Type	Freestanding Washing Machine
Capacity	8 kg
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Weight	70 kg
Power Supply	220-240 V / 50 Hz
Power Consumption	2000 W (heating) / 500 W (motor)
Maximum Spin Speed	800 rpm
Number of Programs	15
Control Type	Electronic with LED display
Water Consumption	55 L per cycle (average)
Energy Efficiency Class	A++ (assumed)
Noise Level (Wash/Spin)	58 dB / 75 dB
Installation Type	Freestanding
Safety Features	Child lock, overflow protection, unbalanced load detection
Maintenance	Clean filter regularly, check hose connections
Spare Parts Availability	Drum, motor, pump, control board, belts, hoses
Warranty	2 years (standard)

Frequently Asked Questions - KL80TT KELVINATOR

What is the maximum capacity of the Kelvinator KL80TT washing machine?

The KL80TT has a maximum dry load capacity of 8 kg. It is suitable for medium to large households.

How do I clean the filter on my Kelvinator KL80TT?

Turn off the machine and unplug it. Open the filter cover at the bottom front, place a towel underneath, and unscrew the filter. Remove lint and debris, then replace and tighten. Perform this every 3 months.

What does error code E1 mean on the KL80TT?

Error E1 indicates a water inlet issue. Check that the water tap is fully open, the inlet hose is not kinked, and the filter in the inlet valve is clean.

Can I use a 220V outlet for this washing machine?

Yes, the KL80TT is designed for 220-240 V / 50 Hz power supply. Do not use an extension cord or multi-plug adapter to avoid overload.

How do I activate the child lock function?

Press and hold the Child Lock button for 3 seconds until the lock icon appears on the display. To deactivate, repeat the process. This prevents accidental button presses during operation.

What is the spin speed of the KL80TT?

The maximum spin speed is 800 rpm. You can adjust it depending on the fabric type. Lower speeds are recommended for delicate items.

How do I clean the detergent drawer?

Remove the drawer by pressing the release catch. Rinse it under warm water to remove residue. Use a small brush to clean the compartment inside the machine. Reinsert once dry.

What should I do if the machine doesn't drain?

First, check if the drain hose is kinked or blocked. Then clean the pump filter (located at the bottom front). If the problem persists, the pump might be faulty and need replacement.

Is the Kelvinator KL80TT energy efficient?

The KL80TT is rated A++ for energy efficiency, meaning it consumes less electricity and water compared to older models. This helps reduce your utility bills.

How do I level the washing machine?

Adjust the four adjustable feet by turning them clockwise or counterclockwise. Place a spirit level on top of the machine to ensure it is perfectly horizontal. Tighten the lock nuts when done.

USER MANUAL KL80TT KELVINATOR

TWIN TUB WASHING MACHINE

KL80TT

OPERATION MANUAL

Exterior view of a modern single-family washing machine (no visible text or symbols)

NAME OF PARTS

Diagram of a washing machine with numbered parts for identification

SPINTIBER
2. SELECT SWITCH
3. WASH TIMBER
1. WATER INTER
5. WATER INLET DELECTOR
1. WASH TUE
7. PULGATOR
5. LIST FILTER

AFFIXTURE WATER INLET HOSE SPIN COVER

©

INSTRUCTIONS

Scanned text image showing partial Chinese characters and symbols, possibly from a document or form.

VOLTAGE AG220-348V

FREQUENCY

Simple line drawing of a sad face and a small object on a grid surface (no text or symbols)

1. DO HOT INSTALL. THE WRIMER ON AN INCLOED AND BUMP? PLACE PLEASE KEEP AMET FROM THE BACK MILL MORE THEN 3am.

2. OD NOT INSTALL THE WASSEN IS BA. THRESH OR OTHER VERY HUARD PLACE. INSULATION MAT DERBEEFATE CHEDDING MALIFRISTERS ACKIDENTS.

Simple line drawing of a cylindrical object with a flame above it, no text or symbols present.

1. DO NOT ALLOW CHILDREN TO PLAY ON OR IS THE WEATHER? IF A CHILD ACCIDENTIAL PAILS INTO THE NASBIRDING TUB, SERIOUS INJURY CHILD GOVERN.

Cartoon illustration of a smiling rectangular character with arms and legs, standing on a textured surface (no text or symbols)

1. NEVER PUT YOUR HANDS INTO THE WASH DRYING TUS WHILE THE WASHER IS OPERATION IT CAN OASE IN JURY.

Simple line drawing of a person using a tool to cut a box with a sad face (no text or symbols)

Cartoon illustration of a person sitting on a stool with arms raised, standing beside a large container (no text or symbols)

S. BE DURE NOT TO SPLASH OR FOUR WATER ON THE CONTROL PANEL. WHERE THE TIMER AND SWITCH ARE LOCATED IT MAY CAUSE HALF FUNCTION ON ELECTRICAL SHOCK.

d

Cartoon character holding an umbrella with a sun in the background (no text or symbols)

1. KEEP AWAY FROM THE PLACE WHERE IT IS EXPOSED TO THE SIN.

Cartoon illustration of a character with expressive eyes and raised hands, next to a small object (no text or symbols)

1. DO NOT USE WATER NOTTER THEN SOCCIT MAY CHANGE THE SHAP OF THE PLASTIC PARTS IN THE WASHER AND GEARSE A HALTERN

2. BE SURE NOT TERRING ANY TYPE OFFLAME NEAR THE WASHER OR PUT LITCINARETTES OR VOL-ATILE MATERIALS ON THE TOP OF WASHER.

ADMONITION

1. THE MACHINE SHOULD USE SINGLE PHASE TWO POLE SOCKET AND ASSURE RELIABLE EARTH CONNECTION.
2. PLEASE USE THE SOCKET WHICH THE RATED ELECTRIC CURRENT IS HIGHER THAN 50 ALONE.
3. PLEASE DO NOT GARAGE STONE, SIND, FULL OR COOLIGATE THE POWER CORE IN ADDITION, PLEASE DO NOT PUT HEAVYTHING ON THE CORE AND PREVENT FROM CLIPPING.
4. WHEN CLEANING THE MACHINE, PLEASE DO PULL OUT THE FLUG BY THE NET HAND.
5. IF THE POWER/CORE IS DAMAGED IN ORDER TO AUTHOR THE DANGER, PLEASE ACK THE PROFESSIONAL HAND/MAINTENANCE DEPARTMENT WHICH APPOINTED BY THE MANUFACTURER.

Simple line drawing of a person standing next to a box with an X mark (no text or symbols)

B

CALL ATTENTION ESPECY

1. PLUS IS WASH THE LEAVINGSER JOHN WITH DARK COLOR INJES NEWMARNE.

1. CHINESE THE 10000000000000000000000000000000000000000

1. BIG BUT INSURS ARE NOT THE CHAPES WORTH ON FESTED BY THE GAS BLUE AMO-ALOXIDE.

1. PUBLIC HAS THE SHORT OUTPER- ING.

1. FOME BE TAMILTON THE EQUITY OF THE ABOVE THE INFO- TO

1. PLEASE PUT THE FLATS AND START BOURING TO LACE IN THE MATHY BUTURE MATERIAL.

PREPARATION

I. CONNECT THE WATER MILET HOW TO THE PAPER.

1. PLUG THE POWER CORD INTO AN ELECTRICAL OUTLET.

2. IF THE SUPPLY CORO IS DAMAGED, IT MOST BISREPLACED BY THE MANUFACTURER OR ITS SERVICE AGEND OR A SIMILARLY QUALIFIED PERSON IN ORDER TO AND/OR HAZARD.

3. THE MAXIMUM LENGTH ARE HEIGHT TO WHICH THE DRAIN HAS CAN BE EXTENDED ARE GIVEN BELOW.

Simple line drawing of a rectangular container with labeled parts (no text or symbols)

Cartoon character holding a sign, no visible text or symbols

WASHING INSTRUCTIONS

1.WASH

A. SET THE "WATERMINT SELECTOR" TO "MASH" LOCATION.

1. SET THE "SELECT SWITCH" TO THE "STANDARD" LOCATION.

2. TURN THE FAUCET ON FOUR INTO WATER UNTEL THE WATER LEVEL REACHED TO THE DESIRED WATER LEVEL TURN THE FAUCET OFF.

3.SUPPLY THE POMEERIES DETERGENT TO THE WARE TUE.

SANSO THE LAUDAY INTO THE MASS TUE.

ALKET THE WASH ITEMS TO DESIRED TIME AND THE MACHINE WILL BEGIN THE WASH GYCLE.

1. TRANSFER THE WASHED LAUDRY FROM WASH TUB TO THE SPIN TUB.

2. SET THE SELECT SWITCH TO DRAIN.

2.RINSE

A. TO SAVE TIME AND WATER, SPIN ON THE LAUNCH BEFORE KINDING.

1. SET THE "SELECT SWITCH" TO "BRAIN" TO EMPTY THE WATER FROM THE WASHER, SET THE "SELECT SWITCH" TO "WASH".

6.SET THE "WATER INLET SELECTOR" TO "WASE" PAGE INTO WATER UNTIL THE WATER LEVEL REACHES TO THE DESIRED WATER LEVELTURN THE EADGET OFF.

0.PUT THE DRINED LAUNORT BACK IN THE MASH TOO.

WASHING INSTRUCTIONS

D-[1]RINSE USING WATER CURRENTLY INTO THE WASHER, WITH WATER SUPPLY CUT OFF:
A. SET THE "WAIN TIME" TO 5 MINUTES TO KINSE.
3.AFTER BENSING ,SPIN-DRY THE LAUNDAY 1-2MINUTES, IF THE MATER IN THE WASH TUB IS DIRTY,PLEASE REPEAT THE ABOVE STEPS UNTIL CLEAR. GENERALLY, IT NEEDS 2-3 TIMES.
D-12 SINDS WHILE NEW WATER IS BEING ADDED TO THE WASHER.
A. SET THE "WATER INLET SELECTOR" TO "WASH" FOUR INTO WATER TO THE DESIGNED WATER LEVEL, CONTINUING TO FOUR WATER.
8. SET THE "MASH TIME" TO THE HEEDER TIME TO RING UNTIL WATER IS CLEAR TURN THE FAUCET OFF.

3. SPIN-DRYING:

A. TRANSFER LAUNDRY FROM THE WASH TUB TO THE SPIN TUB PLACE CLOTHES EVENLY IN THE BOTTOM OF TUB PLACE INNER COVER OF THE SPIN TUB ON THE TOP OF THE LAUNDRY. CLOSE THE CLEAR SAFETY LID AND THE UPPER SPIN COVER.
8. SET THE "SPIN-TIME" TO THE DESIRED TIME AND SPIN: DRYING WILL START.

NOTE:1. IF THE SPIN TUB MAKE GREAT CLASH, PLEASE TURN OFF THE SPIN TIME AFTER THE TUS STOP CHECK THE LAHIDRY AND PUT THE CLOTHES EVENLY.

2.TURN OFF AND UNPLUG THE MACHINE WHEN NOT IN USE.

4. DEWATERING:

A. BEFORE WASHING, HAND UP THE GRAINAGE HOSE IN THE CISTERN.
8. ENHING MASHING TURN THE 'SELECT SWITCH' TO 'DRAIN' LOCATION, OPEN SPIN COVER, THE UPPER DRAINING FILL, STARTS WORKING, THE WATER IN WASH TUB CAN BE DRAINED.

WASHING INSTRUCTIONS

C.WHEN SPIN-DRYING ENDS/LET THE SPIN COVER BOMN,SET THE SPIN TIMER TO DESIRED TIME, THE UPPER BRAINING PUMP STARTS WORKING, THE WATER IN SPIN DRUM CAN BE DRAINED/IF YOUR WASHING MACHING WITHOUT UPPER DRAIN AGE FUNCTION,YOU JUST NEED TO LET THE DRAW HOOD INTO THE GROUND,SET THE "SELECT SWITCH" TO THE "BRAIN" LOCATION,OTHER THE WATER IS DRAINED.

THE CLEANING METHOD OF FILTER

(IF DO NOT CLEAN THE FILTER, IT WILL INFLUENCE THE FILTERING EFFECT)

1. PLEASE FULL THE FILTER OUT.
2. OPEN THE FILTER, CLEAN THE DUST GOUZE WITH WATER, AND OUT RID OF THE CRUMB.
   3.CLOSE THE FILTER, INSERT THE FILTER INTO THE DRIVING SLOT ON THE INNER TUB.

graph TD
    A["Machine"] --> B["Fan"]
    B --> C["Control Unit"]
    C --> D["Water Machine"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

TROUBLE SHOOT TABLE

PROBLEM	REASON	SOLUTION
THE PULSATOR CAN NOT ROTATE	POWER CUT OR SWITCH OFF	SWITCH ON PLUG
	TRANSMISSION BELT BURST	ASSEMBLE THE TRANSMISSION BELT
	BELT PULLEY BECOME FLEXIBLE	TIGHTEN THE BELT
	PULSATOR IS BLOCKED BY SOMETHING	REMOVE THE BLOCKAGE
THE PULSATOR ROTATE TOO SLOWLY	BELT BECOME FLEXIBLE	TIGHTEN THE BELT OR REPLACE IT
	THE FLEXIBLE SCREW OF MOTOR IS LOOSE	TIGHTEN THE BELT AND THE SCREW
ABNORMAL NOISE AND VIBRATION	THE CLOTHES IN THE SPIN-DRY TUB IS UNBALANCED	PLACE THE CLOTHES NEATLY
	THERE IS SOMETHING BETWEEN THE PULSATOR AND THE WASH TUB	REMOVE IT
WATER LEAKS RFON WASH TUB	WASH TUB DON NOT TIGHTEN WITH HOSE	TIGHTEN IT
SPIN-DRY BASKET WILL NOT ROTATE	LOOSE SWITCH	ADJUST THE CONTACTOR OR THE SWITCH
	THE FIXED SCREW OF SPIN-DRY BASKET OR SHAFT COUPLING IS LOOSE	TIGHTEN THE SCREW
	THE SHAFT OF SPIN-DRY BASKET IS TWINED BY THE TEXTILE	REMOVE THE TEXTILE
	BRAKE DRAGLINE IS RELAXED	TIGHTEN THE DRAGLINE
THE SPIN-TUB WILL NOT DRAIN	SOMETHING DROPS INTO THE PLACE BETWEEN SPIN-TUB AND OUT BASKET	REMOVE IT
● ATTENTION:IF ABOVE PROBLEMS CAN NOT BE SOLVED,PLEASE CALL QUALIFIED REPAIR PERSONNEL.