Deaf Bonce

Apocalypse AT-37 Sport - Uncategorized Deaf Bonce - Free user manual and instructions

Find the device manual for free Apocalypse AT-37 Sport Deaf Bonce in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Deaf Bonce Apocalypse AT-37 Sport - page 3
View the manual : English EN Русский RU
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type High-frequency speaker (tweeter)
Brand Deaf Bonce
Model Apocalypse AT-37 Sport
Series Apocalypse
Size 3.9 inches (100 mm)
Diaphragm Material Polycarbonate
Body Material Aluminum
Magnet Type Neodymium
RMS Power 60 W
Max Power 120 W
Voice Coil Size 1.5 inches
Voice Coil Wire CCAW (Copper Clad Aluminum Wire)
Frequency Response 2,000 - 20,000 Hz
Impedance 4 ohms
Sensitivity (SPL) 108.8 dB
Recommended Amplifiers Atom 500.2 Pro, Atom 700.2 Pro, Atom 900.2 Pro, Atom 2.5K Pro, Atom 3.5K Pro
Recommended High-Pass Filter 8 kHz at 12 dB/Oct
Mounting Depth 65 mm (2.56 inches)
Outer Diameter 100 mm (3.94 inches)
Operating Temperature +5 °C to +40 °C (41°F to 104°F)
Box Contents 2 speakers, mounting kit, owner's manual, warranty card
Warranty Period 12 months
Service Life 12 months

Frequently Asked Questions - Apocalypse AT-37 Sport Deaf Bonce

What is the power handling of the Apocalypse AT-37 Sport?
The Apocalypse AT-37 Sport handles 60 W RMS and 120 W max. Ensure your amplifier's nominal power does not exceed these values to avoid damage.
What is the impedance of this tweeter?
The impedance is 4 ohms. This is suitable for most car audio amplifiers.
What type of magnet does the AT-37 Sport use?
It uses a neodymium magnet, which provides high efficiency and a compact design.
What is the frequency response of this tweeter?
The frequency response ranges from 2,000 Hz to 20,000 Hz, covering the upper treble range.
What diameter of speaker cable should I use?
Refer to the manual's cable selection table. Generally, for lengths up to 2 meters and 60W RMS, 16 AWG is sufficient; for longer runs, use thicker wire.
How should I set the high-pass filter for these tweeters?
Set the high-pass filter (HPF) on your amplifier to 8 kHz at 12 dB/Oct to protect the tweeters from low frequencies.
What amplifiers are recommended for the AT-37 Sport?
Deaf Bonce recommends using amplifiers from the Atom series: Atom 500.2 Pro, 700.2 Pro, 900.2 Pro, 2.5K Pro, or 3.5K Pro.
Can I use these tweeters in a vehicle with a 12V electrical system?
Yes, the tweeters are designed for standard car audio 12V systems. Ensure your amplifier is compatible.
How do I connect multiple AT-37 Sport tweeters?
The manual shows wiring diagrams for series and parallel connections. For example, two 4 ohm tweeters in series give 8 ohms; in parallel, 2 ohms.
What is included in the box?
The package includes 2 high-frequency speakers, a mounting kit, owner's manual, and warranty card.

User questions about Apocalypse AT-37 Sport Deaf Bonce

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Apocalypse AT-37 Sport - Deaf Bonce and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Apocalypse AT-37 Sport by Deaf Bonce.

USER MANUAL Apocalypse AT-37 Sport Deaf Bonce

natural_image Technical line drawing of a mechanical component with concentric rings and mounting holes (no text or symbols)

AT-37 Sport

APOCALYPSE SERIES

CONTENTS

EN

  1. Introduction
  2. Safety instructions
  3. Wiring diagrams
  4. Filtering, recommended amplifier settings
  5. Specifications
  6. Dimensions
  7. Box contents
  8. Warranty period, after-sales service and service life information
  9. Information on disposal of the electrical and electronic equipment (for the European countries with separate waste collection)

GLOBAL SPONSOR

dbDRA

1. I NTR ODU CTI ON

Thank you for purchasing of this Deaf Bonce product! Our company is committed to the creation of extremely loud sound systems with no loss of quality.

To ensure proper use, please carefully read through this manual before using this product. It is especially important that you read and observe caution's in this manual. Please keep the manual in a safe and accessible place for future reference.

2. SAFE TY IN STR UCT ION S

  1. Fasten the speakers properly when installing it in the vehicle. If the component is disconnected during driving, it may cause serious damage to the passengers of the vehicle or another vehicle.
  2. Before installing the components, if possible store the product in it's original package to avoid accidental damage to the product.
  3. Be careful when installing and dismantling the speaker! Do not let the speaker drop to avoid damage of its moving parts.
  4. When working with tools follow safety rules.
  5. Before the installation switch off the head unit and all other audio devices to avoid their damage.
  6. Make sure that the location of the speaker does not hinder the proper operation of mechanical and electrical devices of the vehicle.
  7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt. ATTENTION!!! The product may be operated at +5 °C (41F) to +40 °C (104F). In case of moisture condensation, let the product to dry.
  8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe or other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
  9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical devices. Make sure that they are firmly fixed and protected over the entire length.
  10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
  11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the insulating layer, short circuit and fire.
  12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies close to the parts exposed to heat.

CAUTION!!! High sound pressure can damage your health!

Please use the common sense when controlling volume!

3. W IRING DIAGRAMS

Do not expose your amplifier to loads below the value predetermined by the manufacturer.

Various examples of connection types are given at the pages below. Use these examples to determine the required load impedance of your connection.

Serial connection of the speakers

Deaf Bonce Apocalypse AT-37 Sport - Serial connection of the speakers - 1

natural_image Pure electrical circuit lines without any symbols
Voice coilTotal impedance
4 Ohm x 2 HFS8 Ohm

Deaf Bonce Apocalypse AT-37 Sport - Serial connection of the speakers - 2

natural_image Pure electrical circuit lines without any symbols

Deaf Bonce Apocalypse AT-37 Sport - Serial connection of the speakers - 3

natural_image Pure electrical circuit lines without any symbols
Voice coilTotal impedance
4 Ohm x 3 HFS12 Ohm
Voice coilTotal impedance
4 Ohm x 4 HFS16 Ohm

Parallel connection of the speakers
Deaf Bonce Apocalypse AT-37 Sport - Serial connection of the speakers - 4

natural_image Pure electrical circuit lines without any symbols

Deaf Bonce Apocalypse AT-37 Sport - Serial connection of the speakers - 5

natural_image Pure electrical circuit lines without any symbols

Electrical wiring diagram showing four circular components connected to a busbar with labeled terminals and grounding symbols

Voice coilTotal impedance
4 Ohm x 2 HFS2 Ohm
Voice coilTotal impedance
4 Ohm x 3 HFS1.33 Ohm
Voice coilTotal impedance
4 Ohm x 4 HFS1 Ohm

Deaf Bonce Apocalypse AT-37 Sport - Serial connection of the speakers - 7

natural_image Pure electrical circuit lines without any symbols
Voice coilTotal impedance
4 Ohm x 4 HFS4 Ohm

CAUTION!!! High sound pressure can damage your health! Please use the common sense when controlling volume!

Selection of the diameter of speaker cables

Use the table below to select the desired diameter based on the length and the power consumption.

Deaf Bonce Apocalypse AT-37 Sport - Selection of the diameter of speaker cables - 1

The correct choice of amplifier, its settings, filtering and enclosure largely influence on the lifespan of your audio system. You should select an amplifier with a nominal power, not exceeding the nominal power of the speakers. Proper coordination of the head unit (HU) with the amplifier will allow to get clean, undistorted signal applied to the component to prevent overheating and voice coil damage. Recommended settings of the amplifier and HU: Volume of HU should not exceed 80%. The amplifier sensitivity should be set to 50%.

The recommended filter settings:

The high pass filter HPF (the filter that cuts all frequencies below those set for the filter) should be set to 8 kHz (12 dB/Oct)

Recommended amplifiers: Atom 500.2 Pro, Atom 700.2 Pro, Atom 900.2 Pro, Atom 2.5K Pro, Atom 3.5K Pro.

APOCALYPSE

Deaf Bonce Apocalypse AT-37 Sport - FILTERING, RECOMMENDED AMPLIFIER SETTINGS - 2

line | Frequency (Hz) | Power Level (dB) | | -------------- | ---------------- | | 1 k | -10 | | 2 k | -5 | | 5 k | 0 | | 10 k | 0 | | 20 k | 0 |
  1. SPECIFICATIONS
Model AT-37 Sport
Size (inch/mm)3,9 / 100
Diaphragm materialPolycarbonate
BodyAluminum
Magnet typeNeodymium
Power RMS (W)60
Power MAX (W) 120
Voice coil size (inch) 1.5
Voice coil wireCCAW
Frequency response (Hz)2 000 - 20 000
Impedance (Ohm)4

SPL (dB) 108.8

This specified sensitivity is not directly connected with the sound pressure in the vehicle and therefore should not be used as the sole indicator for comparison with other speakers.

Ø 92.5 mm / 3.64" Ø 100 mm / 3.94" Ø 79.1 mm / 3.11" 65 mm / 2.56" 75.5 mm / 2.97"

Insta l la t io n
nonpolar capacitor nonpolar capacitor

7.BOX CONTENTS

  1. High-frequency speaker - 2 pcs.
  2. Mounting kit - 1 pc.
  3. Owner's manual - 1 pc.
  4. Warranty card - 1 pc.

8. WARRANTY PERIOD, AFTER-SALES SERVICE AND SERVICE LIFE INFORMATION

EN

Each Deaf Bonce product is warranted to be free from defects in materials and workmanship under normal use and service.

The warranty period for the product is 12 (twelve) months from the date on which the product is transferred to the consumer (this date shall be deemed to be the date on which the consumer starts using the product).

During the warranty period, defective parts will be repaired or replaced at the discretion of the manufacturer provided that there are grounds for doing so under the laws of the consumer's country. The defective product must be returned to the dealer from whom it was purchased together with the duly filled out warranty certificate, complete, with original packaging.

Our company shall not be liable for any damage caused by transportation. Our company shall not be liable for any expenses or lost profits arising out of or in connection with the use or inability to use the product or any other incidental or indirect costs, expenses, or damages incurred by the customer. The warranty is valid in accordance with the laws currently in force. For more information, please visit our company website and refer to the warranty card.

The manufacturer reserves the right to change the design and specification of the product without prior notice.

The service life of the product is 12 (twelve) months from the date on which the product is transferred to the consumer (this date shall be deemed to be the date on which the consumer starts using the product).

The product or any part (component) of the product must not be used in any way (including, but not limited to use for intended or any other purpose, transportation, storage, modification/alteration/improvement/upgrade) after the expiry of the service life.

At the end of its service life, the product must be disposed of.

9. INFORMATION ON DISPOSAL OF THE ELECTRICAL AND ELECTRONIC EQUIPMENT (FOR THE EUROPEAN COUNTRIES WITH SEPARATE WASTE COLLECTION)

Items marked "crisscrossed wheeled bin" are not allowed to be disposed of together with usual household waste. These electrical and electronic products should be disposed of in special reception centers, equipped for recycling such products and components. For information about the location of the nearest disposal / recycling spot and the rules of delivery of waste please contact your local municipal office. Recycling and proper disposal helps to protect the environment and prevent harmful effects on health.

QR code image containing encoded data, no visible human-readable text

Manufacturer: Ningbo Basshead I&E Trading Co., Ltd Made in China

Deaf Bonce Apocalypse AT-37 Sport - INFORMATION ON DISPOSAL OF THE ELECTRICAL AND ELECTRONIC EQUIPMENT (FOR THE EUROPEAN COUNTRIES WITH SEPARATE WASTE COLLECTION) - 2

natural_image Pure electrical circuit lines without any symbols
natural_image Pure electrical circuit lines without any symbols

Deaf Bonce Apocalypse AT-37 Sport - INFORMATION ON DISPOSAL OF THE ELECTRICAL AND ELECTRONIC EQUIPMENT (FOR THE EUROPEAN COUNTRIES WITH SEPARATE WASTE COLLECTION) - 3

natural_image Pure electrical circuit lines without any symbols
natural_image Pure electrical circuit lines without any symbols

Deaf Bonce Apocalypse AT-37 Sport - INFORMATION ON DISPOSAL OF THE ELECTRICAL AND ELECTRONIC EQUIPMENT (FOR THE EUROPEAN COUNTRIES WITH SEPARATE WASTE COLLECTION) - 4

natural_image Pure electrical circuit lines without any symbols

earth earth earth earth

natural_image Pure electrical circuit lines without any symbols
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Deaf Bonce

Model : Apocalypse AT-37 Sport

Category : Uncategorized