ADMSW-0424-S - Smartwatch Bauhn - Free user manual and instructions

USER MANUAL ADMSW-0424-S Bauhn

Should you for any reason need to return this

product for a warranty claim, make sure to include all respondents with the product

include an accommodation with the product.

Product doe

If you encounter problems with this product, or

if it fails to perform to your expectations, make

sure to contact our After Sales Support Centre on 1300.002.534

(3) 7000 692 55

AFTER SALES SUPPORT

客服 1308 002 534

leenspo.org/support

Model: Z(30)W-64(24) ct Code: 715493 04/2024

Message

Swiss up

messages. After your smart phone is connected

to the watch, you can view new messages and

other app notifications on the watch. The latest

9 notifications will be displayed on the watch. On the O'Watch Pro app, under the notification

On the QWBSO1 NO app, under the notification settings, enable "allow", turn on SMS and

select which app notifications to receive.

NOTE: Under "Background Operation Protection

Guide" on the QWatch Pro app, enable the messages to run in the background.

。

Sedentary Reminder

Set reminders to notify

Set the reminder times

and the watch will alert

Drink Water Reminder

Set reminders to not buy

Set the reminder times on the QWatch Pro ap

and the watch will alert you on the set time.

Watch Easy Screen

You can change the style of the watch interface

On the main screen, press and hold the screen

to change the

different options, then tap the touch screen ag to confirm selection.

to confirm sure

Find Phone

After your smart phone is connected to the

watch, tap the 📞 on at the setup menu and

your smart phone will ring or vibrate

Shortcut menu

7.2

C

G

• • • SHORED: Manu where you can turn on/off do not disturb

… (1) turn off from do not disturb mode, adjust brightness, see

messages, shut down and

enter settings.

#

B. 101

Settings

On the main menu, tap on the icon to enter

the settings menu to change the below:

Preferences, Dial setting (Watch face), Find m

phone, Languag

15 16 17

Change The Straps

Turn the watch over, such

from the watch over, past the needle as illustrated

below to take off the

original strap, then fit the

new strap.

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

sts of a magnet which in

er metallic objects, may

d/or loosen the strap.

Specifications

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated placeholder underscores where none exist in the GT, violating the rule to ignore such lines. Hence, the OCR result is inconsistent with the Ground Truth.

Display 1.57", 2

Ingress protecti

express proceeds

Charging time 2

Charging input

charging input

Bluetooth Rang

Built in Bottoms

Built-in Battery

Weight 42g (ap)

(二) 本次股东大会的决议

Dimensions (mm

The Bluetooth ^® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of such rights by Hards (IR) Holdings Pty Ltd is under

or select hands by hands in) holdings by Ltr transfer license. Other trademarks and trade names are those of

their respective owners

Notes:

BAUHN

The product is guaranteed to be free from defects in

workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty.

later for patient visits that will be seen. Women who identify by period, under normal use and care, will be repaired,

replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits

spoon with no charge for pants and labour. The benefits conferred by this warranty are in addition to all rights and

remedies in respect of the product that the consumer

hall under the competition and consumer Act 2015 and similar state and territory laws.

Our goods come with guarantees that cannot be

excluded under the Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and to compensation for any other recognisable foreseeable

is compensation for any other discretionary interestable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure plans not amount to a major (a) an

Quality and the future does not amount to a major loaner.

18 19 20

Repair and Refurbished Goods or Parts Notice

Unfortunately, sometimes faulty products are manufactured,

which needs to be returned to the supplier for repair.

Please be aware that if your product is capable of retaining user-generated data such as files stored on a computer.

hard drive, telephone numbers stored on a mobile

telephone, songs stored on a portable media player, games saved on a game console or files stored on a USB memory.

marked on the games console of files stored on a 30 memory stick) during the process of repair, some or all of your

stored data may be lost. We recommend you save this data

with review prior to lending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with refublished goods of the same

type or use refurbished parts in the repair process.

Please be assured though, refurbished parts or

replacements are only used where they meet ALDI's

stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint.

Please telephone us on 1300 002 534 or write to us at:

Tempo (Aus) Pty Ltd ABN 70 106 100 252

PO Box 132, French Forest, NSW 1640, Australia

Telephone: [phone] (Aust) - Fax: [phone] Tempo Help Desk: 1300 002 534 (Aust)

(Operating Hours: Mon-Fri 8:30am-6pm; Sat Ram-6pm EST)

BAUHN

Smart Watch

User Guide

A

lerqsa.org/support

Parts of the watch

NOTE: The images in this guide are for reference only.

NOTE: The images in this guide are 1 Your watch may be a different colour.

first Time Use

Charge your watch before using for the first time, you will need to charge it for about 2 hours.

Charging steps:

1. Align the charging pins on the back of the watch to the charging pins on the charging cable. It will snap into position once correctly aligned.

2. Connect the charging cable to a USB charging adaptor (not included) or a USB port on your

computer

1. Once fully charged, unplug the charging

cable from the charger.

To keep the charging pins clean, please use a

QWatch Pro App

Search for the QWatch Pro app in the app store to download

in the app store to download, or scan the QR code below for

installation.

For Android For iOS

GET IT ON

Google Play

(No text)

Google May a Google LLC.

Apple, the Apple logo, iPhone, and iPad are trademarks of

Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc. 4

C

2

广力云智慧零售收银系统

[Non-Text]

Downloaded on the

App Store

(二)交易对方

ogo are trademarks of

i iPad are trademarks of

Turn on the Watch

Once the watch is fully charged, press and hold the side button for 3 seconds to turn on the

watch. To turn off the watch, press and hold the

side button for 3 seconds until "shutdown" icon appears, tap the 📷 con to turn the watch off.

Connect to the App

Open the QWatch Pro app. On the main page, tan the pop and select "Add" at the "Add

top the zoom and select "Add" of the "Add device" menu. It will automatically start to search

for nearby devices. On the devices list, select "ADMSW04245" to connect to the watch. On

iOS devices, you may need to tap on "Pair" on a

pop up window.

Disconnect from the App For both iOS and Android devices, open the

QiWatch Pro app on your smart phone. Tap

"Device" and select "Unbend" to disconnect the watch from the app. You will also need to

open the Settings menu on your smart phone.

Go to Brumbson settings, tap on the "1" (for iOS) or "setting" (for Android) icon on the right side

of "ADMSW04245" and then tap "Forget This Device" to finish disrepresenting

Turn On the Screen

To turn on the screen, press the side button or raise your arm if you're wearing the watch. Pres

the side button again to turn off the screen.

Raising your arm too quickly or slowly may not turn the screen on.

Functions On the Home Screen

- Swipe right to access the main men

- Swipe left to access the function cards. Press and hold any card to edit the order

of the cards: Activity, Heart rate, Sleep

monitor, Wealth music playback.

- Swipe up for the notifications screen. - Swipe down for the shortcut menu.

- Simple DOWN for the SHORT metal. - Press the side button to return to the

main menu.

Functions in any Screen

- Swipe right to the pr

- Tap on any icon to get into the sub screen.

[Non-Text]

Applications

Please allow permission and enable the notification settings on the respective smart

- notification settings on the respective smart phone application.

Pedometer (Steps)

On the main menu, tap on the spoon to view data on your steps taken, distance travelled and

data on your steps taken, distance traveled and calories burnt. The watch will record your data

automatically. Tap on the touch screen when on the interface to view more detailed data.

the interface to view Sports (Training)

On the main menu, to

the multi-sport screen. There are 22 sport modes

for you to choose from.

When you want to pause/stop the activity, tap the screen once to display the pause/stop icon.

Tap the icon to pause/stop.

Sport record

On the main menu, tap on the 📄on to enter

the sports recording interface. It will display the

Heart Rate

On the main menu, tap on the ☐on

measure your heart rate. You can also swipe left twice to access the interface. Set measurement.

intervals and view more detailed data on the

Quinter No app

Temperature On the main way

On the main menu, tap on the front enter the body temperature interface

centre of the screen to start measuring your temperature.

Tap the Setting

select unit measurement (C* or F*).

Tap the Record icon on the upper right corner to turn on automatic recording, which will

automatically monitor temperature every 30 minutes. Ten the Guardian again to show the

minutes. Tap the Record Icon again to show that data for the past 24 hours.

NOTE: it is recommended to wear the watch for more.

than 3 minutes for a stable body temperature recording

NOTE: The results and measurements of heart rate and temperature data cannot be used for medical reference

Sleep Monitor

On the main menu, tap on the icon to view clean data fun; must be wearing the watch.

sleep data (you must be meaning the watch during the sleep duration for the function to

work). You can also swipe left four times to view the date. You may detail records on the

the data: View more detailed records on the QWatch Pro app as the data on the watch will

be synchronised to the app.

NOTE: If the sleep duration is less than 1.5 hours, the date will be not recorded.

Data Will Be Not

Alarm Clock On the main menu, on the Air Access

On the main menu, tap on the second to view your alarms. Tap "+" to set your alarms. When

the set time is up, the watch will alert. You can see

up to 10 alarms. Bluetooth Music Playback

Bluetooth Music Playback You must be executed to the Offshore Pro. and

You must be connected to the QWatch Pro app to use the function.

- On the main menu, tap the 📄in to

enter the Bluetooth music playback menu • Open the music app on your smart

phone.

- Tap play/pause icon to play/pause music. - Tap previous/next icon to play the

previous/next song.

- Tap the volume icon to increase/decrease volume level.

NOTE: For iOS devi

Splice will not work if job do not pick -ADM3W04D5 on the pop up screen. On the main items, cap on the watch on the watch or select "Take Pictures" on the QWata

reath Training

on the main menu, tap on the

enter the breathing training function. Select the breathing training mode and time, then inhale/

whale according to the rhythm displayed on the

atch.

topwatch

in the main menu, tap on the icon to enter powatch interface. Tap the play icon to start t

opwatch, tap the pause icon to pause and the

but IECB to Reset the time.

10

Timer

On the main menu, tap on the icon to enter times interface. Select from 1/7/5/20/20/20/system

other interface. Select from 173/3/10/20/30/custom minutes, and the watch will alert when the

selected time is up.

Camera On the

On the main menu, tap on the watch on the watch or select "Take Pictures" on the Q/Wats

Pro app to use the watch as a camera remote for

your phone. Tap the icon on the watch screen to remotely control the app to take a photo.

Note: The remote capture function is for the app only.

Weather

Weather On the m

Live weather. You must be connected to the

QiWatch app.

NOTE: You must have Internet/mobile connection for this function to work. Your phone location/GPS must also

be turned on. The weather displayed may not be the same as your phone's default weather app.

11