NU-CHY1 - Interface de navigation automobile PAC - Free user manual and instructions

USER MANUAL NU-CHY1 PAC

The NU-CHY1 is a Navigation Unlock integration interface that allows the factory navigation features of your Chrysler/Dodge/Jeep radio to be used by the passenger at anytime.

Installation

Installation: Disconnect the main 22-pin harness from the back of the radio. Plug the male connector on the NU-CHY1 harness into the 22-pin port on the back of the radio. Connect the factory 22-pin harness into the female connector on the NU-CHY1 harness. Plug the Black micro-fit 24-pin connector on the NU-CHY1 harness into the NU-CHY1.

In vehicles equipped with a Multi-Function Display (MFD) in the instrument cluster or an external Uconnect module it is not necessary to connect and mount the LED. The best way to determine if the UConnect is external is if the vehicle has an external iPod or USB input (not including the one built into the front of the radio). If the vehicle is not equipped with an MFD or external Uconnect module mount the LED in a location that is visible to the driver.

Operation - Vehicles With Steering Wheel Controls

Activating the Navigation Unlock

Press and hold the “Source” button on the steering wheel controls (SWC) for at least two seconds and then release to activate the NU-CHY1. If the vehicle is equipped with a MFD in the cluster it will display “Confirm Safe Passenger Use”. If the vehicle is equipped with an external Uconnect module the radio will display “Press Again to Confirm Safe Passenger Use”. If present, the dash mount LED will illuminate red. Press the “Source” button on the SWC again within 5 seconds to acknowledge “safe use”, agreeing that use will be performed only by the passenger whenever the vehicle is in motion, and activate the NU-CHY1. If applicable, the MFD and/or radio will display “Acknowledged”. If present, the dash mount LED will then illuminate green. To de-activate the NU-CHY1 simply press and hold the “Source” button on the SWC for at least two seconds and then release.

WARNING: In order to avoid distraction, which could lead to an accident, the driver should never utilize systems unlocked by the NU-CHY1 when the vehicle is in motion. Even when operated by the passenger, the vehicle driver should maintain their attention on the road at all times.

Press & Hold the Source Button to Enable/Disable Navigation Unlock

1. Press & Hold the Source Button for at Least 2 Seconds Then Release
2. MFD and/or Radio Will Display "Confirm Safe Passenger Use." If Present, Dash Mount LED Displays Red Light Prompting Confirmation of Safe Passenger Use
3. Press the Source Button Again Within 5 Seconds to Confirm
4. MFD and/or Radio Will Display "Acknowledged". If Present Dash Mount LED Displays Green Light
5. Repeat Step 1 to De-Activate

Pure diagram of a three-cylinder shape with a red arrow pointing to the center (no text or symbols)

Press & Hold the Source Button to Enable/Disable Navigation Unlock

1. Press & Hold the Source Button for at Least 2 Seconds Then Release
2. MFD and/or Radio Will Display "Confirm Safe Passenger Use". If Present, Dash Mount LED Displays Red Light Prompting Confirmation of Safe Passenger Use
3. Press the Source Button Again Within 5 Seconds to Confirm
4. MFD and/or Radio Will Display "Acknowledged." If Present Dash Mount LED Displays Green Light
5. Repeat Step 1 to De-Activate

**CONTROLS LOCATED ON RIGHT REAR OF STEERING WHEEL**

Operation - Vehicles Without Steering Wheel Controls

Activating the Navigation Unlock

Start with the factory radio on. Turn the radio off then on within three seconds. The dash mount LED will illuminate red. Turn the radio off then on again within three seconds to acknowledge "safe use", agreeing that use will be performed only by the passenger whenever the vehicle is in motion, and activate the NU-CHY1. The dash mount LED will then illuminate green. To de-activate the NU-CHY1 simply turn the radio off then on within three seconds.

WARNING: In order to avoid distraction, which could lead to an accident, the driver should never utilize systems unlocked by the NU-CHY1 when the vehicle is in motion. Even when operated by the passenger, the vehicle driver should maintain their attention on the road at all times.

Turn radio off and on within 3 seconds to activate/de-activate the NU-CHY2
1. Start with radio on.
2. Turn the radio off then on within 3 seconds. The dashmount LED will illuminate red.
3. Turn the radio off then on again to confirm safe use. The dash mount LED will illuminate green.
4. Repeat step 2 to de-activate.

Installation Notes/Troubleshooting

1. When installing this interface the vehicle must be turned off.
2. If the factory radio does not come on or "flickers" off & on, the factory amplifier does not turn on or you are receiving audio on only one side of the vehicle, please make sure that the male pins in the NU-CHY1 plug are not bent or out of place.
3. The red status LED on the NU-CHY1 indicates that the board is functioning properly. This LED can only be seen by removing the blue housing and accessing the main circuit board.
4. In order to see the text on the MFD it must be in the default display of the temperature/compass or at the top of the list if setup in list format.

DISCLAIMER: Under no circumstances shall the manufacture or the distributors of the NU-CHY1 be held liable for claims of any loss or damage, consequential, direct or indirect, arising from the sale, installation, or use of the NU-CHY1. The manufacture and its distributors will not, nor will they authorize any representative or any other individual, to assume obligation or liability in relation to the NU-CHY1 other than its replacement.

AGREEMENT: End user agrees to use this product in compliance with the instructions and terms of use above and with all State and Federal laws. PAC provides instructions and safety warnings with respect to this product and disclaims all liability for any use not in conformity with those instructions or other misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger use only.