MA01021 - Ventilateur domestique MISTRAL - Free user manual and instructions

USER MANUAL MA01021 MISTRAL

Expressaire 250mm Self-Closing Exhaust Fan

Instruction Manual Model: MA01021

Important Safeguards

When using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury to persons, basic safety precautions should always be followed, including:

For Your Safety

Read all instruc

the appliance.

- Young children must be supervised to ensure that they do not play with the appliance.

- To disconnect, grip the plug and pull it from the wall outlet. Never pull by the cord. Do not use with wet hands or in damp environments.

- If the supply cord is damaged, it must be replaced before further use by the manufacturer, its service agent or similarly quantified persons in order to avoid a hazard.

• This appliance is for indoor use only.

- Do not allow ceiling insulation to cover any part of the rear of this appliance.

- Do not put any type of speed control device in line with the fan's power supply.

- Do not attempt to modify this appliance.

- Do not place any subject or body part into the fan while it is operating.

• Do not clo

- Do not clean the device while it is plugged in. - Do not install the device in an environment that suffers from water leakage.

- Other than the removable blade assembly, there are no use serviceable parts in the appliance. Do not attempt to repair. - Do not immerse the motor in any liquid.

- Do not insert or allow foreign objects to enter any grille opening, as this may cause damage to the unit and/or injury to the user.

Remove all packaging and check the appliance for any

- Do not use if there are visible signs of damaged to the appliance.

Warning

If the supply power cord is damaged, the power cord must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

This product has not been designed for any uses other than those

specified in this booklet

save these instructions

Before You Start

This exhaust fan must be mounted more than 20cm from the side walls of room, more than 30cm from the top of the ceiling cavity and more than 2.3m away from the floor.

Only mount this exhaust fan in a flat ceiling. Do not mount on an

angle, in curved ceilings or in vertical walls. Make sure no electrical cables are in the way before you cut the mounting hole.

Any electrical work including the installation of switches, wiring and

socket outlets must be called out by a licenced electrician. In accordance with the as/NZS 3000 wiring rules, the wall switch must not be installed where it can be reached by a person in the bath or shower.

Do not modify any structural component of the building in any way to install the exhaust fan

Do not install anywhere where water may be splashed into the

exhaust fan.

Any air that is removed from the room by the fan must be replaced by an equivalent amount of air from outside the room - either through slightly open windows, under a door or similar. The more sealed the

room is, the more degraded the exhaust fans performance will be.

This fan may be ducted if the ducting is stiff, and does not impede the self-closing fins. Any applicable building codes must be adhered to.

mistral

Expressaire 250mm Self-Closing Exhaust Fan

Instruction Manual

Model: MA01021

Cleaning

Ensure the fan is switched off at the mains before attempting any cleaning.

1. Remove the fan blade assembly by unscrewing the central knob.

2. Wash the fan blade assembly in warm soapy water, then rinse clear.

3. Allow fan blade assembly to dry completely.

4. Replace fan blade assembly onto motor housing.

Technical Specifications

Power Supply: AC 220-240V\~50Hz

Power Consumption: 40%

Fan Speed: 1250 RPM

Motor power: 40 Watts

Airflow: 750 m3/h

Fan diameter: 250mm

NOTE: As a result of continual improvements, the design and specifications of the product within may differ slightly to the unit illustrated on the packaging. If any household fixed wiring becomes necessary, it must be carried out by a licensed electrician.

Warranty Conditions for purchase in Australia & New Zealand

Any claim under this warranty must be made within 12 months.

of the date of purchase of the product. To make a claim under

the warranty in Australia, take the product (with proof of purchase) to any Bunnings store (see www.bunnings.com.au in

Australia or www.bunnings.co.nz in New Zealand for store (locations).

GSM Sales Pty Ltd bears reasonable, direct, expenses of

claiming under the warranty in Australia. You may submit details and proof to a Bunnings store for consideration or contact our service agent below.

This warranty is provided in addition to other rights and remedies

you may have under law; our goods come with guarantees which cannot be excluded under the Australian Consumer Law

[If purchased in Australia] or the Consumer Guarantees Act

1993 (if purchased in New Zealand). You are entitled to

replacement or retrea for a major failure and no compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

The warranty excludes damage resulting from product misuse or product neglect. The warranty covers domestic use only and does not apply to commercial applications.

This warranty is given by GSM Sales Pty Ltd

ABN: 53007682475

For Warranty and technical queries: 1300 373 199 Aus or

0800 200 037 NZ

Warranty Exclusion

Damage to the base or diffuser or any part through accident,

G|S|M

GSM Sales Pty Ltd

Consumer Service Centro : Auc: 1300 373 199 62: 0800 286/202

the I208 Take Pty Group of European Asia's policies of nominal improvement throughout the product. As such the unit contained within may differ slightly from the unit illustrated on the pack.

BROX: In CHINA An-SSM Sales Pty Ltd. Group of Companies

Cat. No. MA01021 April 2018