PS2K - Subwoofer MCINTOSH - Free user manual and instructions
Find the device manual for free PS2K MCINTOSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | McIntosh |
| Model | PS2K |
| Category | Subwoofer |
| Type | Powered subwoofer |
| Driver Size | 12 inches |
| Amplifier Type | Class D |
| Power Output (RMS) | 500 watts |
| Power Output (Peak) | 2000 watts |
| Frequency Response | 20 Hz – 200 Hz |
| Crossover Frequency Range | 40 Hz – 200 Hz, variable |
| Phase Control | 0°/180° switch |
| Inputs | Line-level RCA, speaker-level binding posts, balanced XLR |
| Dimensions (W x H x D) | 17.5 x 14 x 17.5 inches |
| Weight | 60 lbs |
| Cabinet Material | MDF with real wood veneer |
| Finish | Black gloss or silver |
| Protection Circuitry | Thermal and overcurrent protection |
| Auto-Standby | Yes, with selectable threshold |
| Warranty | 3 years parts and labor |
Frequently Asked Questions - PS2K MCINTOSH
How do I connect the PS2K subwoofer to my system?
Use the line-level RCA inputs for a typical AV receiver with a subwoofer output, or connect to speaker-level inputs if your amplifier lacks a dedicated sub out. For balanced connections, use XLR inputs. Ensure the power cable is plugged into a grounded outlet.
Where should I place the PS2K for best bass performance?
Place the subwoofer in a corner or along a wall to reinforce bass, but avoid exact corners if bass becomes boomy. Experiment with placement while playing a bass-heavy track. The phase switch can help integrate with main speakers.
What is the phase control and how do I set it?
The phase control (0° or 180°) adjusts the timing of the subwoofer’s output relative to the main speakers. Set it to the position that produces the loudest, most coherent bass at the listening position. This ensures in-phase sound waves.
How do I set the crossover frequency?
Match the crossover frequency to your main speakers’ low-end capability. For satellite speakers, a setting of 80–120 Hz is common. Turn the crossover dial until the sub blends seamlessly without localization.
Can I use two PS2K subwoofers?
Yes, you can daisy-chain via line-level outputs or use a Y-splitter. Multiple subwoofers can reduce room modes and provide more even bass. Ensure each subwoofer’s phase and volume are set consistently.
How do I adjust the subwoofer volume?
Use the volume knob on the back panel. Start with it at minimum, then gradually increase while playing music until the bass balances with the main speakers. Avoid distortion or excessive vibration.
What does the auto-standby feature do?
The auto-standby feature automatically powers down the subwoofer after a period of inactivity (usually 20 minutes). It will wake up when a signal is detected. This saves energy and extends component life.
How do I clean the subwoofer cabinet?
Use a soft, dry microfiber cloth to gently wipe the cabinet. Avoid liquids, abrasives, or chemical cleaners, which may damage the wood veneer or gloss finish. For grille, use a vacuum with a brush attachment.
What is the power consumption of the PS2K?
The subwoofer draws approximately 800 watts at full RMS output and less than 5 watts in standby mode. For exact specifications, refer to the user manual or label on the back panel.
Where can I find the user manual for the McIntosh PS2K?
The original manual is available for download on the McIntosh website or via the product page at notice-facile.com. Ensure you have the model number PS2K for the correct document.
User questions about PS2K MCINTOSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual PS2K - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS2K by MCINTOSH.