XPL-600U - Planer XU1 - Free user manual and instructions

USER MANUAL XPL-600U XU1

We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.

Category Example
Wear parts* Carbon brushes, drive belt
Consumables* Planing knife
Missing parts

* Not necessarily included in the scope of delivery!

In the event of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Please ensure that you provide a precise description of the problem and answer the following questions in all cases:

• Did the equipment work at all or was it defective from the beginning? - Did you notice anything (symptom or defect) prior to the failure? - What malfunction does the equipment have in your opinion (main symptom)? Describe this malfunction.

Declaration of Conformity

Planer XPL-600U (XU1)
☐ 2014/29/EU	☐ 2006/42/EC
☐ 2005/32/EC_2009/125/EC	☐ Annex IV Noitki ed Body: Noitki ed Body No.:
☐ 2014/35/EU	☐ Reg. No.:
☐ 2006/28/EC	☐ 2000/14/EC_2005/88/EC
☒ 2013/30/EU	☐ Annex V
☐ 2014/32/EU	☐ Annex VI
☐ 2014/53/EC	Noise: measured Imax = dB (A): guaranteed Imin = dB (A) P. x. KW, L/S. cm Noitki ed Body
☐ 2014/68/EU	☐ 2004/26/EC
☐ 90/396/EC_2009/142/EC	Emission No.:
☐ 89/686/EC_96/58/EC
☒ 2011/65/EU
Standard references: EN 60745-1; EN 60745-2-14; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3
Landau/Isar, den 09.06.2016	Yang/Produkt Management/Stechnungs/General Manager
First CE: 16 Archive-File/Record: NAPR014326 Art.-No.: 44.722.47 †L.No.: 11016 Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

XPL-600U

GB Additional operating & safety instructions Planer

Danger! - Read the operating instructions to reduce the risk of injury

Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight.

Caution! Wear ear-muffs. The impact of noise can cause damage to hearing.

The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the iSC GmbH.

Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos!

Items supplied

Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our service center or the sales outlet where you made your purchase at the latest within 5 working days after purchasing the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service information at the end of the operating instructions.

• Open the packaging and take out the equipment with care.
• Remove the packaging material and any packaging and/or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport damage. If possible, please keep the packaging until the end of the guarantee period.

Danger!

The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating!

Proper use

The hand-held electric planer is designed for planing, rabating and chamfering pieces of wood.

The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.

Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

Technical data

Mains voltage:	230 V ~ 50 Hz
Power input:	500 W
No load speed:	15,000/min
Planing depth:	0-1 mm
Rebate depth:	6 mm
Planing width:	82 mm
Protection class:	II/II

Danger!

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60745.

LpA sound pressure level 65.9 dB(A) KnA uncertainty 3 dB

LWA sound power level 96.9 dB(A)

KWA uncertainty 3 dB

Wear ear-muffs

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three directions) determined in accordance with EN 60745

tions) determined in accordance with EN 60745.

Vibration emission value main handle a,

= 3.117 m/s²

Vibration emission value auxiliary handle a_h

= 3.470 m/s²

K uncertainty = 1.5 m/s ²

The specified vibration value was established in accordance with a standardized testing method. It may change according to how the electric equipment is used and may exceed the specified value in exceptional circumstances.

The specified vibration value can be used to compare the equipment with other electric power tools.

The specified vibration value can be used for initial assessment of a harmful effect.

Keep the noise emissions and vibrations to a minimum.

• Only use

king order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever

necessary.

- Switch the appliance off when it is not in use.

• Wear protective gloves

Caution!

Residual risks

Even if you use this electric power tool in ac-

cordance with instructions, certain residual risks cannot be wise out. The following he

Risks cannot be ruled out. The following hazards may arise in connection with the equipment:

Hazards may arise in connection with the equipment's construction and layout:

1. Lung damage if no suitable protective dust mask is used.

Damage to hearing if no suitable ear protection is used.

1. Damage to hearing if no suitable ear protection is used.
2. Health damage.
3. Health damage caused by hand-arm vibrations if the equipment is used over a prolonged period or is not properly guided and

tions in the equipment is used over a prolonged period or is not properly guided and

maintained.

For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request: As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment. The old equipment can be returned to a suitable collection point that will dispose of the equipment in accordance with the national recycling and waste disposal regulations. This does not apply to any accessories or aids without electrical components supplied with the old equipment.