NA-V90FC1LVT - Washing machine PANASONIC - Free user manual and instructions

Product Type	Front-loading washing machine
Brand	Panasonic
Model	NA-V90FC1LVT
Capacity	9 kg
Maximum Spin Speed	1400 rpm
Dimensions (H x W x D)	845 x 600 x 590 mm
Weight	70 kg
Power Supply	220-240 V, 50 Hz
Power Consumption	2000 W (heating), 230 W (washing)
Energy Efficiency Class	A+++
Motor Type	Inverter motor (brushless)
Noise Level (Wash/Spin)	54 dB / 74 dB
Water Consumption (per cycle)	48 L
Programs	Cotton, Synthetic, Delicate, Quick 15', Wool, Hand Wash, Drum Clean, etc.
Display	LED display with touch controls
Smart Features	Wi-Fi enabled, Panasonic SmartApp+
Child Lock	Yes
Self-Cleaning	Drum Clean program
Safety Features	Overheat protection, door lock, anti-flood system

Frequently Asked Questions - NA-V90FC1LVT PANASONIC

How do I activate the child lock on the Panasonic NA-V90FC1LVT?

Press and hold the 'Child Lock' button (usually combined with another button) for 3 seconds until the lock icon appears on the display. To deactivate, press and hold again.

What should I do if the washing machine displays an error code?

Refer to the manual's error code table. Common codes: Hxx (heating issue), Uxx (unbalanced load), Exx (drain problem). Turn off the machine, unplug, wait 10 minutes, then restart. If persists, contact service.

Can I use the Panasonic SmartApp+ with my washing machine?

Yes, the NA-V90FC1LVT supports Wi-Fi. Download the Panasonic SmartApp+ from the App Store or Google Play, connect to your home Wi-Fi, and follow pairing instructions in the manual.

How do I clean the detergent drawer?

Remove the drawer by pressing the release lever. Wash with warm water and a soft brush. Dry thoroughly before reinserting. Do not use abrasive cleaners.

Why is my washing machine leaking water?

Check the inlet hose connections for tightness. Ensure the drain hose is properly inserted into the standpipe. Clean the pump filter and check for blockages. If leak persists, inspect the door seal.

What is the maximum spin speed and how do I adjust it?

The maximum spin speed is 1400 rpm. You can adjust it by pressing the 'Spin Speed' button on the control panel to cycle through options: No spin, 400, 800, 1000, 1200, 1400.

How often should I run the Drum Clean program?

Run the Drum Clean program every 1-2 months to remove bacteria and odors. Use a drum cleaner tablet or a small amount of bleach (follow manual instructions). Do not add laundry.

My washing machine won't start. What could be wrong?

Ensure the door is fully closed and latched. Check that the water supply is turned on and the drain hose is not kinked. Verify that the machine is plugged in and the circuit breaker has not tripped.

Can I wash wool or delicate fabrics in this machine?

Yes, select the 'Wool' or 'Delicate' program. Use a suitable detergent for delicates. Do not spin at high speeds. Always check garment care labels.

How do I level the washing machine to reduce vibrations?

Adjust the four feet by turning them clockwise or counterclockwise. Use a spirit level to check. Tighten the lock nuts when level. Ensure the machine is on a solid, flat surface.

USER MANUAL NA-V90FC1LVT PANASONIC

Illustration of a silver front-loading washing machine with a circular vent and control panel (no text or symbols)

Illustration of a person pushing a large washing machine with a circular component nearby (no text or symbols)

Illustration of a hand holding a water droplet with a 'X' symbol above, no text or symbols present

Không sử dụng.

Two identical diagrams showing a hand holding a plug, with no text or symbols present.

Không sử dụng.

graph TD
    A["Hand-drawn diagram: Air mask being compressed"] --> B["Plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in plug-in pig"]
    B --> C["Hand-drawn diagram: Hand holding a switch to power supply in a circuit board"]
    C --> D["Hand-drawn diagram: Hand holding a device with fuse and switch to power supply in a circuit board"]
    D --> E["Hand-drawn diagram: Hand holding a worker in a house with tools and switch to power supply in a circuit board"]

Illustration of two hands performing a medical procedure with sparkles (no text or symbols)

Có thể gây hồng hóc

Illustration of a washing machine with a person holding a tool and scattered items, no text or symbols present.

Illustration of a washing machine with a 'X' symbol and scattered noise lines around it (no text or symbols on the machine itself)

Illustration showing a washing machine and a faucet with a hand washing it (no text or symbols)

Simple line drawing of a cord with sparkles around it (no text or symbols)

Illustration of a hand pressing down on a washing machine wheel with a warning symbol (no text or labels)

Illustration of a washing machine with legs and feet on top, marked with an 'X' symbol (no text or labels present)

Illustration of a washing machine emitting light rays toward a sun, with a 'X' symbol in the corner (no text or symbols on the main image)

Simple line drawing of a box with a circular opening and a cross symbol (no text or labels)

Two identical diagrams of a washing machine with a crossed-out X mark and a checkmark, showing internal components without any text or symbols.

Technical line drawing of a washing machine showing front and side views (no text or symbols)

Bàn lè

Technical line drawing of a front-mounted washing machine with visible internal components and mounting feet (no text or labels)

Illustration of a coiled tube with two connectors (no text or symbols)

Technical line drawing of a square plate with a screw, no text or symbols present

Trước khi giặt

Chuẩn bị giặt ủi

Giặt riêng.

Illustration showing a hand applying paint to fabric and a close-up of hands holding a bowl (no text or symbols)

LU'U Y

Black-and-white illustration of a jacket with a cross mark symbol (no text or symbols present)

Illustration of a shirt with a cross mark symbol (no text or labels)

Simple illustration of a cross symbol, a round fruit, and a hanging container (no text or symbols)

Simple 3D illustration of a computer mouse with a cross symbol above it (no text or labels)

Illustration of a crossed-out document with a cross symbol (no text or symbols present)

Simple diagram with a cross symbol above a tilted rectangular area (no text or labels)

Tã giấy

Khác...

Illustration of a sweater with a cross mark and dashed lines indicating measurement (no text or symbols)

Simple line drawing of a T-shirt with a butterfly design on the front (no text or symbols)

LU'U Y

- Tất → bất trở lại

Uót Khô

Illustration showing a bag being placed on a pile of food and then being brushed with a tool (no text or symbols present)

Vón cục Bột giặt

Illustration of a bag with granular powder and a wooden stick (no text or symbols)

Chất tây

Nước xả

Line drawing of a hand holding a drawer with a small object inside (no text or symbols)

Line drawing of a washing machine with a circular lid and control panel (no text or symbols)

LU'U Y

KHỜI ĐỘNG

KHỜI ĐỘNG

Illustration of a washing machine with a 'X' symbol indicating no text or symbols on the machine itself.

Nước xả

Tối đa 150 ml

LU'U Y

Illustration of a washing machine with a magnifying glass and a cross symbol (no text or labels)

Illustration of a washing machine with a door open and a person inside, showing a crossed-out garment (no text or symbols)

Illustration showing a washing machine transforming into a shirt with decorative stars (no text or symbols)

Các chương trình

Simple line drawing of a bed with a checkmark indicating completion (no text or symbols)

graph TD
    A["Step 1: Screen panel with curved arrow"] --> B["Step 2: Folded sheet with curved arrow"]
    B --> C["Step 3: Washer washing machine with attached band"]
    C --> D["Step 4: Stressed washer with coiled spring"]

LU'U Y

Two identical thermometers with a gradient shaded from left to right (no text or symbols)

Thấp Cao

■ Hưởng dẫn cải đặt

Two washing machines side by side, each with a circular icon on its side (no text or symbols)

Thấp Cao

■ Huống dẫn cải đặt

Line drawing of a washing machine with a circular button and sparkles on the front panel (no text or symbols)

3

V105FR1 V10FR1 V95FR1 V90FR1

Giữ 5 giây

V105FC1 V10FC1 V95FC1 V90FC1

Đèn sáng (Bật)

LU'U Y

Illustration of a person with thought bubble showing a pile of food, next to a T-shirt (no text or symbols)

Giảm lượng đồ giặt.

■ Để hủy:

Quy trình tương tự

Hủy bổ còi báo

Diagram showing a computer tower connected to a water tap, with an inset close-up of the pipe connection (no text or symbols)

1

2

7

Diagram of two cylindrical components with internal mesh, connected by a directional arrow (no text or symbols)

5

10

Bảo dưỡng (tiếp)

Illustration of a washing machine with a hand cleaning it, surrounded by sparkles (no text or symbols)

Illustration of a hand pressing down on a washing machine with arrows indicating clockwise motion (no text or symbols)

Diagram of a mechanical component with arrows indicating assembly or movement (no text or symbols present)

Illustration of a cleaning or cleaning process with components including a door, faucet, and water drop (no text or symbols)

Illustration of a printer emitting a paper airplane into a machine (no text or symbols)

Technical line drawing of a mechanical component with an inset showing a magnified view of a component (no text or symbols present)

2

Hoán đổi

Diagram of a mechanical device with a handle and valve, no text or symbols present

3

4

5

Line drawing of a kitchen sink with a plate and tool, no text or symbols present

6

Thay thế

8
1

Hand holding a tool interacting with a control panel (no visible text or symbols)

3

Illustration of a washing machine with a padlock symbol on its side, surrounded by sound waves (no text or symbols)

Cửa bị khóa.

Để mở cửa:

Mức nước

Máy chính

Cửa không mở

Illustration of a hand pressing down on a washing machine with a question mark indicating unknown hand (no text or symbols present)

□ Thù

Illustration of a washing machine with raindrops and a 'X' symbol (no text or labels)

Illustration of a washing machine and a bathtub with steam rising (no text or symbols)

Illustration of three washing machines with a 'X' symbol above, no text or symbols present

Lắp đặt tâm đáy

Diagram showing a computer tower with an open drive and a separate plate with an arrow, labeled '1' (no text or symbols on the diagram itself)

Diagram showing a switch inserted into a device component with a curved cable (no text or symbols)

3

LU'U Y

Cân bằng thiết bị

1

4

LU'U Y

Diagram of a bolt and nut assembly with a cross symbol (no text or labels)

Simple line drawing of a bolt and nut assembly with a checkmark symbol (no text or labels)

Nói đường ống

Ông xả

Illustration of a pen tip with a threaded rod inserted into a lined notebook (no text or symbols)

Chạy thủ

Giặt nhanh 15'

Illustration of a woman holding a smartphone next to a washing machine (no text or symbols present)

graph LR
    A["Water Tap"] --> B["Washing Machine"]
    B --> C["Recycling Washing Machine"]
    C --> D["Disposal of Finer"]
    D --> E["Finished Product"]

LU'U Y

Illustration of a washing machine with a Wi-Fi symbol above it (no text or labels)

Khôi tạo

• Android and Google Play are trademarks or registered trademarks of Google LLC.
• iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
• The App Store is a service mark of Apple Inc.
• “WPA™”, “WPA2™” and “WPA3™” are trademarks of “Wi-Fi Alliance®”.
• QR Code is registered trademark of DENSO WAVE INCORPORATED.
• Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc.
• Panasonic Corporation uses these marks under license. Other trademarks and trade names are property of their respective owners.
• Other names, company names, product names, etc. described in this manual are trademarks or registered trademarks of their respective companies. Some ™ and ® marks are not included in the text.

■ About software

This product consists of the following types of software.

(1) Software developed by or for Panasonic Corporation (Panasonic)
(2) Software owned by a third party and licensed to Panasonic
(3) Conditionally licensed open source software

The software classified in (3) above is distributed with the expectation that it will be useful on its own, but we do not warrant any implied guarantee of “commerciality” or “fitness for a specific purpose”. No warranty is given, including.

cJSON

Copyright (c) 2009 Dave Gamble Copyright (c) 2009-2017 Dave Gamble and cJSON contributors

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

wpa\_supplicant

Copyright (c) 2005-2009, Jouni Malinen [e-mail] Copyright (c) 2008, Jouni Malinen [e-mail]

wpa_supplicant

Copyright (c) 2003-2019, Jouni Malinen [e-mail] and contributors All Rights Reserved.

This program is licensed under the BSD license (the one with advertisement clause removed).

If you are submitting changes to the project, please see CONTRIBUTIONS file for more instructions.

License

This software may be distributed, used, and modified under the terms of BSD license:

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Mbed TLS

Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
Copyright (C) 2006-2017, ARM Limited, All Rights Reserved
Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
Copyright (C) 2006-2019, ARM Limited, All Rights Reserved
Copyright (C) 2006-2019, Arm Limited (or its affiliates), All Rights Reserved
Copyright (C) 2016, ARM Limited, All Rights Reserved Copyright (C) 2016-2018, ARM Limited, All Rights Reserved
Copyright (C) 2018, Arm Limited (or its affiliates), All Rights Reserved
Copyright (C) 2018, Arm Limited, All Rights Reserved

RealtekSDK

(C) COPYRIGHT 2011 STMicroelectronics

(c) COPYRIGHT 2017 Realtek Semiconductor Corporation

Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.

Copyright (c) 2006-2013 ARM Limited

Copyright (c) 2009-2016 ARM Limited. All rights reserved.

Copyright (c) 2009-2017 ARM Limited. All rights reserved.

Copyright (c) 2009-2018 Arm Limited. All rights reserved.

Copyright (c) 2013 ARM LIMITED All rights reserved.

Copyright (c) 2013 Realtek Semiconductor Corp.

Copyright (c) 2013-2016 Realtek Semiconductor Corp.

Copyright (c) 2014, Realtek Semiconductor Corp. All rights reserved.

Copyright (c) 2015, Realsil Semiconductor Corporation. All rights reserved.

Copyright (c) 2015, Realtek Semiconductor Corp. All rights reserved.

Copyright (c) 2015, Realtek Semiconductor Corporation. All rights reserved.

Copyright (c) 2017, Realsil Semiconductor Corporation. All rights reserved.

Copyright (c) 2017, Realtek Semiconductor Corporation. All rights reserved.

Copyright (c) 2017-2018 Arm Limited. All rights reserved.

Copyright 2014 Tencent. All rights reserved.

Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.

Copyright(c) 2007 - 2016 Realtek Corporation. All rights reserved.

Copyright(c) 2007 - 2017 Realtek Corporation. All rights reserved.

Copyright(c) 2007 - 2018 Realtek Corporation. All rights reserved.

Copyright(c) 2014, Realtek Semiconductor Corporation. All rights reserved.

Copyright(c) 2015, Realtek Semiconductor Corporation. All rights reserved.

Copyright(c) 2016, Realtek Semiconductor Corporation. All rights reserved.

Copyright(c) 2017, Realtek Semiconductor Corporation. All rights reserved.

Copyright(c) 2019, Realtek Semiconductor Corporation. All rights reserved.

copyright Kulesh Shanmugasundaram (kulesh [squiggly] isis.poly.edu)

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

“License” shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

“Licensor” shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

“Legal Entity” shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, “control” means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

“Source” form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

Panasonic SmartApp+ (tiếp)

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

“Contribution” shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, “submitted” means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as “Not a Contribution”.

“Contributor” shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License.

Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.

3. Grant of Patent License.

Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

4. Redistribution.

You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

5. Submission of Contributions.

Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.

6. Trademarks.

This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty.

Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY,

or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

8. Limitation of Liability.

In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability.

While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets “[]” replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same “printed page” as the copyright notice for easier identification within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License");

you may not use this file except in compliance with the License.

You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

lwIP

Copyright (c) 1997 Global Election Systems Inc.

Copyright (c) 2001-2003 Swedish Institute of Computer Science.

Copyright (c) 2001-2003 Swedish Institute of Computer Science. All rights reserved.

Copyright (c) 2001-2004 Axon Digital Design B.V., The Netherlands. All rights reserved.

Copyright (c) 2001-2004 Leon Woestenberg

Copyright (c) 2001-2004 Swedish Institute of Computer Science. All rights reserved.

Copyright (c) 2002 CITEL Technologies Ltd. All rights reserved.

Copyright (c) 2002-2003, Adam Dunkels.

Copyright (c) 2002-2003, Adam Dunkels. All rights reserved.

Copyright (c) 2003 by Marc Boucher, Services Informatiques (MBSI) inc.

Copyright (c) 2003-2004 Axon Digital Design B.V., The Netherlands. All rights reserved.

Copyright (c) 2003-2004 Leon Woestenberg

Copyright (c) 2007 Dominik Spies [e-mail] All rights reserved.

Copyright (c) 2010 Inico Technologies Ltd. All rights reserved.

Copyright (c) 2016 The MINIX 3 Project. All rights reserved.

Copyright (c) 2001, 2002 Swedish Institute of Computer Science. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

Panasonic SmartApp+ (tiếp)

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This file is part of the lwIP TCP/IP stack.

Author: Adam Dunkels [e-mail]

FreeRTOS

Copyright (C) 2017 Amazon.com, Inc. or its affiliates.

All Rights Reserved.

Copyright (C) 2019 Amazon.com, Inc. or its affiliates.

All Rights Reserved.

The FreeRTOS kernel is released under the MIT open source license, the text of which is provided below.

This license covers the FreeRTOS kernel source files, which are located in the /FreeRTOS/Source directory of the official FreeRTOS kernel download. It also covers most of the source files in the demo application projects, which are located in the /FreeRTOS/Demo directory of the official FreeRTOS download. The demo projects may also include third party software that is not part of FreeRTOS and is licensed separately to FreeRTOS. Examples of third party software includes header files provided by chip or tools vendors, linker scripts, peripheral drivers, etc. All the software in subdirectories of the /FreeRTOS directory is either open source or distributed with permission, and is free for use. For the avoidance of doubt, refer to the comments at the top of each source file.

License text:

Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Thông số kỹ thuật