NID-1055 - Tablet Naxa - Free user manual and instructions
Find the device manual for free NID-1055 Naxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Naxa |
| Model | NID-1055 |
| Product Type | Tablet |
| Display Size | 10.1 inches |
| Resolution | 1280 x 800 pixels |
| Processor | Quad-core 1.5 GHz |
| RAM | 2 GB |
| Storage | 32 GB internal, expandable via microSD |
| Operating System | Android 10 |
| Battery Capacity | 6000 mAh |
| Dimensions (W x D x H) | 240 x 170 x 10 mm |
| Weight | 500 g |
| Connectivity | Wi-Fi 802.11 b/g/n, Bluetooth 4.0 |
| Ports | Micro USB, 3.5 mm headphone jack, microSD slot |
| Cameras | Front 2 MP, Rear 5 MP |
| Speakers | Built-in mono speaker |
| Power Input | 5V 2A via Micro USB |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use liquids or abrasives. |
| Safety | Keep away from heat sources and water. Do not disassemble. |
| Spare Parts and Repairability | Battery and screen are not user-replaceable. Contact Naxa support for repairs. |
Frequently Asked Questions - NID-1055 Naxa
How do I turn on the Naxa NID-1055 tablet?
Press and hold the power button located on the side of the tablet for 3-5 seconds until the screen lights up.
How can I connect to Wi-Fi?
Go to Settings > Network & Internet > Wi-Fi. Toggle Wi-Fi on and select your network from the list. Enter the password if prompted.
How do I charge the tablet?
Connect the included Micro USB cable to the tablet and a USB power adapter (5V 2A recommended). Plug the adapter into a wall outlet. The battery icon shows charging status.
How do I insert a microSD card?
Locate the microSD card slot on the side of the tablet. Use a SIM ejector tool or a paperclip to open the tray. Insert the microSD card with the gold contacts facing down and push the tray back in.
How do I perform a factory reset?
Go to Settings > System > Reset > Factory data reset. Confirm by tapping Erase everything. This will delete all data, so backup first.
What should I do if the screen is unresponsive?
Try restarting the tablet by pressing and holding the power button for 10 seconds until it reboots. If the issue persists, check for screen protector bubbles or clean the screen.
How do I take a screenshot?
Press and hold the Power button and the Volume Down button simultaneously for 1-2 seconds. The screen will flash, and the screenshot is saved to the Gallery.
How to clean the tablet safely?
Power off the tablet and disconnect any cables. Use a soft, lint-free cloth slightly dampened with water (or a screen cleaner) to wipe the screen and body. Avoid getting moisture in ports.
Can the battery be replaced?
The battery is built-in and not user-replaceable. If the battery does not hold charge, contact Naxa customer service or an authorized repair center.
How do I update the Android software?
Go to Settings > System > Advanced > System update. Tap Check for update. If available, follow on-screen instructions to download and install.
User questions about NID-1055 Naxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tablet in PDF format for free! Find your manual NID-1055 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NID-1055 by Naxa.