KRH3610A - Range hood Kucht - Free user manual and instructions

Product Type	Wall Mounted Range Hood
Brand	Kucht
Model	KRH3610A
Width	36 inches
Mounting Type	Wall mounted
Rated Voltage	110 V
Rated Frequency	60 Hz
Motor Input Power	198 W
Lamp Power	2 x 20 W maximum
Air Volume	9.5 to 15 m³/min
Air Pressure	>160 Pa
Noise Level	<70 dB
Air Output Diameter	150 mm
Filter Type	Aluminum mesh filters (removable)
Number of Filters	2 (estimated)
One-Way Valve	Included
Decorative Cover	Included
Installation Height	25-30 inches above cooktop
Material	Stainless steel
Filter Cleaning Frequency	Weekly
Interior Cleaning Frequency	Monthly
Recommended Detergent	Neutral detergent and warm water
Electrical Plug	Standard 110 V plug
Warranty	Not specified in manual

Frequently Asked Questions - KRH3610A Kucht

What is the recommended mounting height for the KRH3610A range hood?

The recommended mounting height is 25 to 30 inches (65-75 cm) above the top of the cooking range.

How do I clean the aluminum filters?

Press the spring on the edge of the filter to remove it. Dip it in strong detergent and brush gently with a soft brush. Rinse with clean water and air dry before reinstalling. Clean weekly.

Can I use the range hood while cooking with gas?

Yes, but ensure adequate ventilation in the room. The hood must not discharge air into a flue used for gas appliance fumes.

How do I replace a light bulb?

Turn off all power switches before replacing. The lamp power is 2 x 20 W maximum. Consult the manual for specific bulb type.

What should I do if the range hood is noisy?

Check that the wind wheel is not bent or obstructed. Avoid crushing the wheel during cleaning. Also ensure the hood is securely mounted.

Is the range hood suitable for island installation?

No, the KRH3610A is a wall mounted hood and requires a wall for installation.

What is the air volume capacity?

The air volume ranges from 9.5 to 15 m³/min depending on the fan speed setting.

Can I install the hood myself?

It is recommended to have appropriate electrical and technical background. If unsure, hire a professional.

How often should I clean the interior of the hood?

Clean the interior every half month to a month using warm water and neutral detergent. Avoid abrasive materials.

What does the one-way valve do?

The one-way valve prevents backdraft of air into the kitchen when the hood is off.

USER MANUAL KRH3610A Kucht

WWW.KUCHT.COM

BE A PRO IN YOUR KITCHEN

Exterior view of a stainless steel kitchen air duct with ventilation grilles and control panel (no visible text or symbols)

WALL MOUNTED HOOD

INSTALLATION GUIDE AND USER MANUAL

APPLICABLE MODEL: KRH3010A, KRH3610A, KRH4810A, KRH3011A, KRH3611A.

USE, CARE, AND INSTALLTION GUIDE

Please read all manual carefully before installing and operating this appliance.

CONTENTS

1. Product introduction
2. Installation
3. Technical parameters
4. Maintenance
5. Cautions

Model KRH3010A - 30" Wall Mounted Hood

Model KRH3610A - 36" Wall Mounted Hood

Model KRH4810A - 48" Wall Mounted Hood

Model KRH3011A - 30" Wall Mounted Hood

Model KRH3611A - 36" Wall Mounted Hood

1. Product introduction

Thank you very much for choosing our range hood. KUCHT has developed a series of range hoods based on assimilating the advantages of high volume of air, lower noise and elegant appearance.

Product Configuration

1	Exhaust pipe	4	One-way valve	7	Lamps
2	Decorative cover	5	Aluminum filters
3	Machine body	6	Bracket for decorative tube

2. Installation and Operation

1) Position the range hood on the center of cooking stove wall. For best results, the mounting height of the range hood should be 25"-30" (65-75cm) above the top of the range. Mark the position of the holes, which need to be drilled to mount the range hood.

2) According to marks, drill two holes appropriate for heavy duty wall anchors and screws (not included. Mount the range hood on the wall with the two screws and anchors and tighten.

3) Install the one-way valve on top of the range hood and assemble the exhaust pipe and decorative cover.

4) Affix the decorative cover with two M4 tapping screws on the hood body.

5) Make sure all switches are off and then insert the electrical plug into an outlet.

3. Technical parameters

ITEM unit parameter
Rated Voltage V	110
Rated frequency Hz 60
Motor input power W 198
Lamp power W ≤2X20
Air volume m3/min 9.5~15
Air pressure	Pa	>160
Noise level	dB(A)	<70
Air output diameter	mm	150

4. Maintenance

1) Make sure to pull out the plug and cut off the power before maintenance to ensure your safety.
2) Clean the inside and outside of the range hood with warm water containing neutral detergent, then dry them with a piece of dry cloth. Do not scrub them with rough materials such as cleansing ball to avoid damages to the surface. Put on gloves to avoid injuring your hands when cleaning the inside. The cleaning can be done once half a month to a month.
3) Do not crush the wind wheel when cleaning the inside of the wind track of the wind wheel to avoid the deformation of the wind wheel. Otherwise the movement will be increased, which will result in more noise and influence the effect of absorbing the oil-smoke.
4) Frequent cleaning of the filter shall be done. First press the spring on the edge of the filter to dismantle the filter, dip it into strong detergent and brush its surface with soft brush; then hold the filter with both hands and move it up and down in the detergent, clean it with clean water, after which dry it by airing and install it as what it is as before. The cleaning can be done once a week. Do not clean it with combustible detergent such as banana oil and gasoline.

5. Cautions

1) Do not attempt to install this appliance yourself without appropriate electrical and technical background.
2) When maintaining this range hood or changing a light bulb, please be sure that all power switches are in the off position.
3) Do not let the detergent flow into the electric appliance box and the switches when cleaning the inside of the range hood to avoid leaking electricity.

4) Do not flambé under the range hood.

5) There is a fire risk if cleaning is not carried out according to the instructions.

6) Cut off all the circuits with power before approaching the connection ends.

7) This appliance is not intended for use by young children and infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely.

8) Young children should be supervised to ensure that they do not play with the

9) There should be adequate ventilation of the room when the range hood is used at the same time as appliance burning gas or other fuels.

10) The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas and other fuels.

12) The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the range hood, when the range hood is located above a gas appliance. This distance should be at least 25". If the instructions for installation for the gas hob specify a greater distance this must be considered.

13) Regulations concerning the discharge of air must be fulfilled.

14) Warning : If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person to avoid a hazard.

WE TRANSFORM A SIMPLE KITCHEN INTO A PRO ONE. THIS IS WHY WE CARE ABOUT MAKING VERY HIGH PERFORMANCE RANGES AND HOODS, TO MAKE YOU FEEL LIKE A PRO AND STYLISH COOKER.

DESIGN: LONDON DC - WWW.LONDON-DC.COM