UDD-60-HC - Beer dispenser Avantco - Free user manual and instructions
Find the device manual for free UDD-60-HC Avantco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Beer Dispenser |
| Brand | Avantco |
| Model | UDD-60-HC |
| Width | 60 inches |
| Depth | 30 inches |
| Height | 34 inches |
| Weight | 220 lbs |
| Power Supply | 115V / 60Hz / 5A |
| Cooling Type | Forced air |
| Keg Capacity | 1/2 barrel or 2 x 1/6 barrel |
| Number of Taps | 1 |
| Temperature Range | 35-40°F |
| Refrigerant | R290 (HC) |
| Main Features | Stainless steel top, digital thermostat, LED lighting |
| Cleaning | Weekly cleaning of drip tray and tap; monthly coil cleaning |
| Installation | Undercounter with proper ventilation |
| Safety | Stable leveling, grounded outlet, keep away from heat |
| Warranty | 1 year parts and labor |
| Repairability | Replaceable compressor, fan, and thermostat |
Frequently Asked Questions - UDD-60-HC Avantco
What is the recommended temperature for serving beer?
The recommended temperature range is between 35-40°F (1.7-4.4°C) for most beers. Adjust using the digital thermostat.
How often should I clean the beer lines?
Beer lines should be cleaned every 2 weeks using a line cleaning solution to prevent buildup and off-flavors.
Can I install this dispenser under a counter?
Yes, the UDD-60-HC is designed for undercounter installation. Ensure proper ventilation by leaving gaps as specified in the manual.
Why is my beer not cold enough?
Check the temperature setting and ensure the condenser coils are clean. Also verify that the door gasket is sealing properly.
How do I change the keg?
Disconnect the coupling, remove the empty keg, place the new keg, and reconnect the coupling. Purge the line before serving.
What type of kegs does this dispenser accept?
It accepts standard 1/2 barrel or 1/6 barrel kegs with a Sankey D coupler.
My dispenser is making a loud noise. What should I do?
Loud noises may indicate the compressor is running continuously. Check for overloading or blocked ventilation. If persistent, contact service.
How do I adjust the temperature?
Press the UP/DOWN arrows on the digital controller to set the desired temperature. It will display current temperature.
What power supply is needed?
The unit requires a 115V, 60Hz outlet with a minimum 5A circuit. Use a dedicated grounded outlet.
How do I defrost the ice buildup?
Turn off the unit and let the ice melt naturally. Do not use sharp tools to chip ice. Wipe up water after defrosting.
User questions about UDD-60-HC Avantco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual UDD-60-HC - Avantco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UDD-60-HC by Avantco.
