SLPRWAS46 - Pressure washer SereneLife - Free user manual and instructions
Find the device manual for free SLPRWAS46 SereneLife in PDF.
| Product Type | Electric Pressure Washer |
| Model | SLPRWAS46 |
| Power Source | 120V AC, 60Hz, 1400W |
| Max Pressure | 1500 PSI |
| Max Water Flow | 1.2 GPM (4.5 L/min) |
| Dimensions (L x W x H) | 15.7 x 11.0 x 17.7 inches (40 x 28 x 45 cm) |
| Weight | 7.7 lbs (3.5 kg) |
| Hose Length | 20 ft (6 m) |
| Power Cord Length | 16 ft (5 m) |
| Nozzle Types | Adjustable 0° to 40° spray nozzle, plus foam cannon |
| Water Supply | Garden hose connection (standard 3/4 inch) |
| Detergent Tank | Built-in 0.5 L detergent reservoir |
| Main Functions | High-pressure cleaning for cars, patios, siding, and outdoor furniture |
| Safety Features | Auto shut-off trigger, thermal overload protection, ground fault circuit interrupter (GFCI) plug |
| Maintenance | Regularly clean water filter, unhook hoses, store indoors |
| Spare Parts Availability | Nozzles, hoses, O-rings, and foam cannon available online |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - SLPRWAS46 SereneLife
User questions about SLPRWAS46 SereneLife
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Pressure washer in PDF format for free! Find your manual SLPRWAS46 - SereneLife and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SLPRWAS46 by SereneLife.
USER MANUAL SLPRWAS46 SereneLife
Need service or repair?
Want to leave a comment?
PyleUSA.com/ContactUs
SereneLife
by PYLE

natural_image
Green and silver electric water heater with attached cable, no visible text or symbols*☆☆☆☆☆☆
Electric Outdoor Power Washer
WARNING: READ THE INSTRUCTION BEFORE OPERATION THIS MACHINE IS DESIGNED FOR DOMESTIC USE ONLY! COMMERCIAL OR INDUSTRIAL USE ARE PROHIBITED.
>> CONTENTS
Illustration of Appliance 1
General Instruction 2
Safety Instruction 3
Operation 4
Maintenance & Care 6
Troubleshooting 7
Storage 8
Schematic Drawing 9
>> ILLUSTRATION OF APPLIANCE
Spare parts are subject to the specific model. The right of modification is reserved.

-
Water Supply Connector
-
High Pressure Hose
-
Water Outlet
-
Water Inlet
-
ON/OFF Switch
-
Transport Handle
-
Detergent Tank
-
Power Cord
-
Wheels
-
Trigger Gun
-
Spray Lance
-
Safety Lock
-
Hose Lock
-
Trigger Handlr Holder
-
Trigger Handle Locker
-
Retractable Rod
-
Detergent Suction Pipe
-
Filter
-
Degergent Tank Lock
-
Spraylance Holder


READ AND UNDERSTAND OPERATORS MANUAL BEFORE USING THIS MACHINE. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY

>>GENERAL INSTRUCTION:
This high pressure washer is designed for domestic use only:
- To clean cars, motorbikes, caravans, bicycles.
- To clean patios, fences, garden walls, pathways, driveways and house facades, particularly useful for cleaning blocked driveway.
- To remove of algae and moss from roofs, brickwork and guttering.
- To clean garden tools and machinery, furniture and barbecues.
- To clean hygienic of animal pens and their surrounding area.
With accessories, replacement parts and detergents approved by factory. Observe the instructions provided with these detergents.
The packing material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling.
Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances. Please dispose your old appliances using appropriate collection systems.
Read symbols in the operating instructions
Danger: Immediate danger that can cause severe injury or even death.
Warning: Possible hazardous situation that could lead to severe injury or even death.
Caution: Possible hazardous situation that could lead to mild injury to persons or damage to property.
The high pressure washer may not be directed at persons, animals, live electricalequipment or at the appliance itself. Protect the appliance against frost

>> SAFETY INSTRUCTION
Danger
- Never touch the mains plug and the socket with wet hands.
- The appliance must not be used if the power cord or important parts of the appliance, e.g. high pressure hoses, trigger gun or safety devices are damaged. Please arrange for it to be replaced immediately by an authorised repair agent or a skilled electrician.
- The appliance may not be used in areas where a risk of explosion is present.
- The high pressure washer must not be directed at other persons or directed by the user at him/herselfto clean clothing or footwear.
- If the appliance is used in hazardous areas (e.g. filling stations) all of the safety provisions and operating instructions detailed in this manual must be observed.
- Never use the appliance to clean objects containing hazardous substances.
- Vehicle tyres or tyre valves are susceptible to damage from the high pressure washer and may burst. The first indication of this is a discoloration of the tyre. Damaged vehicle tyres/tyre valves are highly dangerous. Ensure that a distance of at least 30 em is observed when cleaning with the washer.
- Risk of explosion. Do not spray flammable liquids. Never draw in fluids containing solvents or undiluted acids. This includes petrol, paint thinner and heating oil. The spray mist thus generated is highly inflammable, explosive and poisonous. Do not use acetone, undiluted acids or solvents as they are damaging to the materials from which is the appliance is made.
Warning
- The mains plug and the coupling of an extension cable must be watertight and must never lay in the water.
- Unsuitable extension cables can be hazardous. Only use extension cables outdoors which have been approved for this purpose and labeled with a sufficient cable cross-section: 1-10m: 1.5mm ^2 10-30m: 2.5mm ^2
- Always fully unroll electrical cables.
-
High pressure hoses, fixtures and couplings are important for the safety of the appliance. Only use high pressure hoses, fixtures and couplings recommended by the manufacturer.
-
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities. The appliance must not be operated by children or persons who have not been instructed accordingly. Children should be supervised to prevent them from playing with the appliance.
- The operator must use the appliance correctly. When working with the appliance, he must consider the local conditions and pay due care and attention to other persons, in particular children who are nearby.
Caution
- Do not use the machine if the persons nearby do not wear safety protection device.
- Wearing protective clothing and safety goggles to protect against splash back containing water or dirt.
- Create stability for the appliance prior to all work on or with the appliance to prevent accidents or damage. The stability of the appliance is warranted when it is placed on to an even surface.
- For safety reasons, we recommend that you operate the appliance only via an earth-leakage circuit breaker (max. 30mA).
- Make sure that the power cord or extension cables are not damaged by running over, pinching, dragging or similar. Protect the power cable from heat, oil, and sharp edges.
- Never leave the appliance unattended when it is in operation.
>> OPERATION
Special accessories expand the possibilities of using your appliance. Please contact the dealer for further information.
Illustrate accessories before start-up.
- Install coupling for water connection (pic A).
Screw the coupling to the water connection on the appliance. - Install high pressure hose (pic B. pic K).
Insert the high pressure hose tightly in to coupling on the appliance, it will lock in audibly. Note: make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. - Install the storage of trigger gun (pic C).
Insert the storage of trigger gun and push down all the way. - Install spray lance (pic F).
Push the spray lance into the trigger gun and fasten it by turning it through 90 degree.
Water Supply
Impurities in the water can damage the high pressure pump and accessories. All high pressure washer (except hot water system) use cold water. The suitable water temperature is 41^ F to 140^ F.
Water Supply from Mains
Observe regulations of water supply.
For connection values, use fibre-reinforced water hose (not included) with a standard coupling, normally the length is 5m, connect the water hose to the appliance and water supply.
- Open the water tap
- Unlock the lever on the trigger gun
- Pull on the lever of the trigger gun
- Turn ON the appliance (pic G ON: open OFF: close)
Start Up
Dry runs lasting longer than two minutes lead to damages to the high pressure pump. If the appliance does not build up pressure within two minutes, switch it off and proceed as instructed in the Chapter "Troubleshooting". The trigger gun is subjected to recoil force when the water washer is discharged. Make sure that you have a firm footing and are also holding the trigger gun and spray lance firmly. The spray lance has two main settings stream and fan for easy cleaning (pic H).

natural_image
Simple line drawing of a tool with an arrow indicating direction (no text or symbols)

natural_image
Technical line drawing of a mechanical assembly with no visible text or symbolsCaution
Prior to cleaning, make sure that the high pressure washer is placed safely on level ground. Wear protective goggles and protective clothing during the cleaning process.
Notes: Release the lever of the trigger gun, the device will switch off again. High pressure washer remains in the system.
Working with Detergent
Use detergent when cleaning. Remove the lid from the detergent bottle and press the detergent bottle into detergent (pic E).
Notes: The device is under low pressure when using detergent and pulling out spray lance.
Release the lever on the trigger gun, lock the lever on the trigger gun, insert the spray lance into trigger gun when interrupting operation. (as pic Q)
Finish Operation
- Turn off tap.
- Press the lever on the trigger gun to release any remaining pressure and water in the system.
- Pull out the mains plug.
- Store the water hose and high pressure hose.
>> MAINTENANCE AND CARE
Turn off the appliance and remove the mains plug prior to any care and maintenance work. Prior to longer periods of storage, pull out the filter (18) in the detergent bottle and clean under running
water. Pull out the filter in the water connection and clean under running water (pic J). Use the needle to clean the residue (pic M). In winter, please do not put the machine outside without draining the water to avoid damage to the machine. Just put it in a room with frost prevention.
TROUBLESHOOTING
| Symptom Cause | Recommended Action | |
| Appliance is not running | 1. Machine not plugged in2. Defective socket3. Defective extension cable4. Incorrect mains voltage5. Switch is off6. Fuse has blown | 1. Plug in machine2. Try another socket3. Try another extension cable4. Check voltage correctly5. Turn on switch6. Replace fuse |
| Pump stop working | Lack of water lead to high temperature | Check water flow quantity ~ put the hose in the 10 (bottle per minute) |
| Fluctuating pressure | 1. Spray lance blocked2. Pump is sucking air3. Impurities in pump | 1. Clean lance with needle2. Check that hoses and connections are airtight3. Contact the dealer |
| Appliance does not reach operation pressure | 1. Spray lance blocked or worn2. Short supply of water3. Hose kinked4. Filter blocked5. Hose blocked | 1. Clean or change spray lance2. Check inlet flow rate3. Straighten out hose4. Clean filter5. Clean hose |
| Trigger gun can't be used | Trigger gun is locked Unlock | Trigger gun safety |
| Machine often starts and stops by itself | 1. Safety valve worn out2. Pump, high pressure hose, trigger gun is leaking | 1. Contact the nearest service center2. Contact the nearest service center |
The content in this instruction manual (include accessories) IS kept the final modifying and explanation rights
Appliance is Leaking
Slight leakage from the appliance pump is normal. If the leakage increases contract the authorized customer service.
Transport Instruction
Mind the weight of appliance during moving. Put the appliance a level ground. Pull out the telescopic rod (Max. length 410mm, as pic D) to move the appliance.
>> STORAGE
- Place the appliance on a level ground
- Disconnect trigger gun and high pressure hose
- Disconnect high pressure hose with outlet
- Put the trigger gun into the trigger gun holder
- Wind back power cord and high pressure
Please store the machine properly especially during winter
SCHEMATIC DRAWING

















SLPRWAS46
PURE CLEAN PRESSURE WASHER
ELECTRIC OUTDOOR POWER WASHER
Features:
• High-Powered Pressure Washer
• Simple & Hassle-Free Plug-in Operation
- Trigger Activated Spraying Nozzle
• Integrated Liquid Detergent / Shampoo Dispenser Bottle
• Adjustable Water Flow Jet-Stream
- Input Valve for Directly Connecting Water Hose
• Universal Threaded Water Hose Connector
- Compact & Lightweight Design for Mobility
• Water-Resistant Construction Housing
• Convenient Carry Handle & Rolling Wheels
• Used for Cleaning Homes, Cars, Boats, RVs, Driveways & Decks
What's in the Box:
- Pressure Washer
- Trigger Spray-Gun
- Nozzle Wand Attachment
• Water Hose, 16.5' ft.
• Water Hose Coupling Connector
Technical Specs:
• Max. Pressure: Up to 2030+ PSI
• Power Output: 1800 Watt
• Water Flow: 380L / per Hour (1.67 Gal. per Min.)
• Max. Operating Pressure: 85bar (8.5Mpa)
• Liquid/Detergent Tank Capacity: 400ml
• Marine Grade Rating: IP-X5
• Construction Material: Engineered PP
• U.S. Universal Water Hose Threading
• High pressure Water Hose Material: Reinforced PVC
• Power Cord Length: 35' ft.
• Power Supply: 110V
- Dimensions (L x W x H): 11.6" x 11.6" x 21.6" -inches
- Sold as: 1
