AF-1000R - Air conditioner NewAir - Free user manual and instructions

Product Type	Evaporative Air Cooler (Swamp Cooler)
Model Number	AF-1000R
Voltage	120V / 60Hz
Power Consumption	200W
Water Tank Capacity	20 Liters
Fan Speeds	3 (Low, Medium, High)
Oscillation	Yes, with ON/OFF button
Timer	Up to 10 hours (0.5 hour increments)
Ionizer	Built-in, generates negative ions
Cooling Function	Evaporative cooling with water and optional ice
Filters	Honeycomb cooling pad, Carbon & TiO2 filter, Dust filter
Casters	Included, with stoppers
Remote Control	Included
Warranty	Limited 1 year manufacturer's warranty
Cleaning Interval	Every 3 months (monthly for hard water)
Safety Features	Automatic shut-off? Not specified; manual cautions for electrical safety

Frequently Asked Questions - AF-1000R NewAir

How do I clean the dust filter?

To clean the dust filter, unplug the unit, unscrew or pull out the dust filter, and wash it with running water. Allow it to dry completely before reinstalling.

Why is there no airflow from the unit?

Check if the power cord is plugged in correctly. Ensure the water tank is locked into the back of the unit. The unit should beep twice when connected to power.

How do I add water to the tank?

Pull off the water tank's cover and pour water into the tank, not exceeding the maximum water line. For enhanced cooling, you can add ice to the tank.

What should I do if the unit does not cool?

Make sure the water tank has sufficient water and that the COOL button is pressed. If the pump is defective, contact customer service.

How do I set the timer?

Press the Timer button repeatedly to add 0.5 hour increments up to 10 hours. To run continuously, ensure the timer is off.

How do I use the oscillation feature?

Press the OSC button once to turn on oscillation. The indicator will show on the display. Press again to turn it off.

What is the ionizer for?

The built-in ionizer generates negative ions to eliminate smoke, dust, odors, and improve air quality. Press the ionizer button to turn it on/off.

How do I install the casters?

Place the unit on a soft mat, gently turn it upside down, and install the casters into the corresponding slots. Tighten the screws. For best stability, put the casters with stoppers in front.

Is it safe to use the cooler in a bathroom?

No, this unit is intended for household indoor use only and should not be operated in bathrooms or any wet or damp locations to prevent electric shock.

What is covered under the warranty?

The limited warranty covers repair or replacement of defective parts due to materials or workmanship for one year from the original purchase date under normal use. Exclusions include damage from improper power supply, accidents, misuse, or acts of God.

USER MANUAL AF-1000R NewAir

Red and black electric air conditioner unit with ventilation grilles (no visible text or symbols)

OWNERS MANUAL

Read and save these instrucons.

A Name You Can Trust

Trust has to be earned and we will earn yours. Customer happiness is the focus of our business.

From the factory to the warehouse, from the sales oor to your home, the whole NewAir family promises to provide you with innovave products, exceponal service, and support when you need it the most.

Count on NewAir.

As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.

Thank you for your purchase and remember NewAir, A Name You Can Trust.

Call us today at 855-963-9247

Or email [e-mail]

For future reference, we recommend you each a copy of your sales receipt here and record the following informaon. You will need this informaon if it becomes necessary to contact the manufacturer for service inquiries.

Date of Purchase: ____

Serial Number: ____

Model Number: ____

Connect with us online.

READ AND SAVE THESE INSTRUCTIONS.

TABLE OF CONTENTS

Introducon 3
Safety Informaon & Warnings 4
Parts List....5
Use & Operaon 6
Installing casters 7
Cleaning & Maintenance....7
Troubleshoong....8
Limited Manufacturer's Warranty 9

SPECIFICATIONS

MODEL NO.	AF-351
VOLTAGE:	120V / 60Hz
POWER CONSUMPTION:	200W
WATER TANK CAPACITY:	20 Liters

INTRODUCTION

An AIR COOLER is a unit that cools the air by evaporang water. This unit uses a honeycomb Iter which results in more eecve cooling. To experience an additional cooling eect, put ice into the water tank.

The built-in IONIZER is a high eiciency, energy-saving device that generates negative ions to eliminate smoke, dust, odors, and to improve air quality.

SAFETY INFORMATION & WARNINGS

When using any electrical appliance, basic safety precautions must be followed in order to reduce the risk of re, electrical shock and/or injury to persons or property. Be sure to read all instrucons before using this appliance and observe the following safety ps:

• Carefully read all instrucons before use.
• Check the condion of the unit aer taking it out of the box. Ensure that all parts are in good condion.
• Before using the unit, verify that the cooler's voltage requirements correspond with your power outlet.
• Do not use any appliance with a damaged cord or plug. If the cord is damaged, please contact an authorized service center.
• Do not aempt to repair, adjust, or replace parts in the unit. Any repairs must be made by an authorized technician.
• Do not place the unit near gas or electric stoves.
• Cauon should be taken when the cooler is used near children. The unit should not be le unaended for any extended period of me while in operaon.
• This appliance should not be used by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instrucon concerning its use by a person responsible for their safety.
• This unit is intended for household indoor use. Do not operate this evaporave cooler in bathrooms or in any other wet or damp locaons.
• Do not insert objects into the air louvers.
• Use the "Power" buon to turn the unit on or o. Do not control operaon by pulling the plug from the power outlet.
• To prevent the risk of electric shock, do not operate the unit with wet hands.
• Save this instrucon manual for future reference.

PARTS LIST

1. Control Panel
2. Air Louvers
3. Carrying Handles
4. Cord Wrap
5. Honeycomb Filter
6. Paron

7. Carbon & TiO2 Filter

8. Dust Filter & Rear Screen

9. Water Level Indicator
10. Casters
11. Water Tank
12. Drain Hole
13. Remote Control

USE & OPERATION

1. POWER: Connect the cord to a power outlet. An indicator light will turn on, indicang that the power source is connected. Press the "On/Speed" buon to turn the unit on. When it turns on, the cooler will start at medium speed (number 2) and then drop to the low speed seng (number 1) aer a few seconds.
2. SPEED: To adjust the fan speed, press the "On/Speed" buon repeatedly until the desires speed appears on the display.

1 - Low Speed
2 - Medium Speed
3 – High Speed

1. OSCILLATION: To turn on the oscillaon feature, press the "OSC" buon once. The indicator will appear on the display. Press the "OSC" buon again to turn o the oscillaon feature.

2. TIMER: The unit comes with a 10-hour mer (max. 10 hours). To set the mer, press the "Timer" buon. Each me the "Timer" buon is pressed, 0.5 hour of operaon me is added. To have the unit run connuously, make sure the mer is o.

3. Press once – 0.5 hour

4. Press twice – 1 hour
5. Press 3 mes – 1.5 hours

6. Up to 10 hours

7. IONIZER: To turn on/o the ionizer feature, press the ionizer buon. The ionizer indicator light will turn on. To turn o the ionizer, press the buon again.

8. COOLING: Fill the tank with water and press the "COOL" buon. The indicator light will turn on. To stop the unit from cooling, press the buon again.

9. ADDING WATER TO THE TANK: Follow these steps to add water to the water tank:
   • Pull o the water tank's cover.

10. Carefully pour water into the water tank. Do not exceed the “maximum” water line on the water level indicator.
    • For enhanced cooling, add ice to the tank.

INSTALLING CASTERS

1. Make sure the unit is not connected to a power outlet.
2. Place the unit on a so mat on the oor. Gently turn the unit upside down and install the casters to the corresponding slots. Install screws ghtly.
3. For best results, we recommend installing the casters with the stoppers in the front.

CLEANING & MAINTENANCE

1. Before disassembling the unit, unplug the unit from the power outlet and drain all if the water from the tank by removing the drain cap.
2. Use a clean, damp cloth to wipe away any dust or dirt from the unit's exterior. Also wipe down the air louvers.
3. CLEANING THE DUST FILTER: Clean the dust Iter by unscrewing /pulling out the dust Iter and washing the dust Iter with running water.

4. CLEANING THE HONEYCOMB FILTER AND TANK: Clean the honeycomb Iter and tank by following these steps:

5. Unscrew and pull out the dustIter.

6. Clean the honeycomb lter by using a vacuum or brush.
7. Use a damp cloth with soap to clean and remove any residue from the water tank.
8. Rinse and drain the water tank.
9. Replace the honeycomb and dust Iters back into the unit. Make sure the Iters are properly inserted before hhtening the screws.

NOTE: We recommend cleaning the unit every 3 months with regular use. However, if you have hard water with a high mineral content, we recommend cleaning the unit once a month to prevent residue buildup.

TROUBLESHOOTING

PROBLEM	PO S SIBLE C AU SE(S)	PO S SIBLE SOLUTION
There is no airow.	a. The power cord is not plugged in.b. The water tank is not locked into the unit.	a. Check to make sure the plug is plugged into an outlet. The unit should beep twice once the power supply is connected.b. Make sure the water tank is locked into the back of the unit.
The unit does not cool at all.	a. There is insucient water in the tank.b. The cool buon was not pressed.c. The pump is defecve.	a. Check the water level in the tank and make sure there is enough water.b. Press the COOL buon.c. Contact customer service if there is an issue with the water pump.
The unit does not sufficiently cool.	The cooling pad is not sufficiently saturated with water.	If speed 3 is selected when in cooling mode, the unit will automacally revert to speed 2 for 5 minutes to allow the pad to be fully soaked. The will automacally turn to speed 3 when the pad is soaked.
Water is coming out of the vents.	The cooling pad may be clogged with debris.	Clean the cooling pad by rinsing it in water and allowing it to thoroughly dry. If the problem persists, contact customer service.

LIMITED MANUFACTURER'S WARRANTY

This appliance is covered by a limited manufacturer's warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operang conditions as intended by the manufacturer.

Warranty Terms:

During the rst year, any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced, at the manufacturer's discreet, at no charge to the original purchaser. The purchaser will be responsible for any removal or transportaon costs.

Warranty Exclusions:

The warranty will not apply if damage is caused by any of the following:

• Power failure
• Damage in transit or when moving the appliance
• Improper power supply such as low voltage, defective household wiring or inadequate fuses
• Accident, alteraon, misuse or abuse of the appliance such as using non-approved accessories, inadequate air circulaon in the room or abnormal operang condions (extreme temperatures)
• Use in commercial or industrial applicaons
• Fire, water damage, the, war, riot, hostility or acts of God such as hurricanes, oods, etc.
• Use of force or damage caused by external inuences
• Parally or completely dismantled appliances
• Excess wear and tear by the user

Obtaining Service:

When making a warranty claim, please have the original bill of purchase with purchase date available. Once conrmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportaon costs. Replacement parts and/or units will be new, re-manufactured or refurbished and is subject to the manufacturer's discreon. For technical support and warranty service, please email [e-mail].