AV-105 BT - Media player Pure Acoustics - Free user manual and instructions
Find the device manual for free AV-105 BT Pure Acoustics in PDF.
| Product Type | Media Player with Bluetooth |
| Brand | Pure Acoustics |
| Model | AV-105 BT |
| Color | Black |
| Dimensions (W x H x D) | 200 x 50 x 120 mm |
| Weight | 0.5 kg |
| Power Supply | 5V DC, 1A via micro USB |
| Battery Capacity | 2000 mAh rechargeable |
| Bluetooth Version | 5.0 |
| Bluetooth Range | Up to 10 m |
| USB Port | USB 2.0 for media playback |
| SD Card Slot | MicroSD up to 32 GB |
| Supported Audio Formats | MP3, WMA, FLAC, AAC |
| Supported Video Formats | AVI, MP4, MKV |
| Display | 1.8-inch TFT LCD |
| Speaker Output | 5W RMS |
| Remote Control | Included |
| Audio Output | 3.5 mm headphone jack |
| Care & Cleaning | Wipe with a soft, dry cloth. Do not use liquids. |
| Safety | Keep away from water and heat sources. Use only provided charger. |
| Spare Parts | Contact customer support for replacement accessories. |
Frequently Asked Questions - AV-105 BT Pure Acoustics
User questions about AV-105 BT Pure Acoustics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Media player in PDF format for free! Find your manual AV-105 BT - Pure Acoustics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AV-105 BT by Pure Acoustics.
USER MANUAL AV-105 BT Pure Acoustics
Thank you for choosing Pure Acoustics. We hope you enjoy each and every use of this product. We suggest that you read this user manual carefully before primary use in order to utilize all of the features in functions installed. Please store it in a safe place for future reference and pass it on to the next owner.
Caution & Safety Guide:
Please power off the unit when not in use. If the unit will not be in use for extended periods it is suggested that you disconnect the unit from its power source.
To prevent damage to the unit do not install in areas of extreme heat or in areas with direct exposure to sunlight.
Don't install the unit in or near a place where it may come in contact with rain, moisture or other liquids.
Install the unit on a horizontal, flat and firm surface with good ventilation. Never block the speaker, blocking these vents may cause damage to the speaker as a result of overheating.
To clean the unit, simply wipe it down using a dry, soft cloth. The unit should never be cleaned chemicals or detergent.
In the rear occurrence of malfunction do not attempt to repair the unit on your own. Contact a certified service professional for a proper diagnosis and repair.
Caution: Dismantling the unit on your own is dangerous and may cause damage to your person or property and will void the warranty.
The lighting flash is intended to alert the user to the presence of dangerous voltage within the product's enclosure and touching the internal components may result in electric shock to your person.
The exclamatory mark is intended to alert the user to the presence of important operating instructions.
To reduce the risk of electric shock or fire, do not remove the cabinet cover simply contact a service professional.
In the box:
In wall Amplifier
External Adapter
Audio terminal adapters (right/left x2)
Power terminal port adapter
Technical Specicaons:
Amplifier Type: Class D
Power Output: 40W (20W x2)
Frequency Response: 20Hz - 20 kHz
Impedance: 4Ω
Infrared Distance: <10 Meters (33ft)
Operating Voltage: 110/220V 50Hz/60Hz
THD: 0.03%
Product Dimensions: 11.5 x 7 x 4.5 cm (4.53 x 2.8 x 1.8 inches)
Cutout Dimensions: 10.3 x 6.8 x 4.8 cm (4.05 x 2.7 x 1.9 inches)
Features
- Amplifier Wireless in wall amplification to 2 embedded in-wall/in-ceiling speakers
- Bluetooth Stream music wirelessly from any Smartphone, tablet or Bluetooth enabled music player
• USB Plug and play music directly off of a flash drives - Micro SD Access music files stored on your memory card
• FM Radio Digital FM tuner with auto-scan
• Auxiliary Input Direct connection to Smartphones, Tablets and other music devices
• LCD Screen Displays mode, volume level, track and artist information and more - Sleep Timer Provides numerous preset automatic power off timer settings
Panel Instruction:
- Equalizer
- Previous song / VOL -
- LCD display
- Power switch
- FM radio / Play/Pause
- Source / Sleep
- Next song / VOL +
- USB port
- Infra red reciever
- SD port
- 3.5mm headphone jack (AUX IN)
Power Switch/AUX position
Panel Instruction:
-
Power switch
-
USB port
-
SD port
-
3.5mm Headphone jack (AUX IN)
Remote Control Description:
Power switch
MODE Mode switch
Mute
PRE/NEXT song
PLAY/PAUSE
- + VOL-/VOL+
EQ EQ control
0 - 9 - 100+ select key figures
Repeat
Plug n' Play Connecons:
- Switch the On/O buon to the "On" position on the top panel of the device -
Note: The default mode is USB/SD immediately upon power up - To play songs o of a ash drive - Simply each the ash drive into the USB port and the device will automatically begin reading the les
- Use the AUX input to plug & play music les on your Smartphone, tablet and/or music players
- To listen to the radio press the mode buon unl the device enters FM mode. Use the arrows on the device or Ch+/Ch- buons on the IR remote control to manually select the desired staon. Long press the Play/Pause buon on the device or IR remote control to use the auto scan feature
- To play audio les stored on a memory card simply insert the card into the SD card slot, the music les will be read automacally
Connecng Using a Bluetooth Device
Your AV-105BT is equipped with an automac pairing feature. This feature allows you to connect a bluetooth device eortlessly without having to enter a specic mode. To connect, simply turn on the Bluetooth funcon on your Smartphone, Tablet or music player and search for “Pure AV-105BT”. Select it form the list of discovered devices to connect.
Once the conneccon is successful the unit will automacally enter Bluetooth mode automacally and music can be streamed wirelessly.
Installation Measurements:
Audio Out: L+, L- Speaker 1 R+, R- Speaker 2
L and N: Power(110V)
L by fire line, N by zero line
Terminal Description:
Wall Installation
Getting Started
Locate the area that you would like to install the AV-105BT and mark the spot using a ruler and pencil.
| You should be able to do this... | ...if you're comfortable with these household tasks.. | ...and know how to use these tools. |
| Single room runs of wire in new construction | installing new light fixtures or security wiring | utility knifepower drill and drill bitswire stripperslevelhammer |
| Room-to-room runs of wire in new construction | installing new light fixtures or security wiringwiring a whole-house computer network | utility knifepower drill and drill bitswire stripperslevelhammer |
| Single room runs of wire in finished homes | installing new light fixtures or security wiringpatching and repairing drywalltouch-up painting | fish tape (longer runs may require 2 tapes)drywall sawutility knifepower drill and drill bitswire stripperslevelhigh-quality stud finderelectrical tape |
| Room-to-room or indoor-to-outdoor runs of wire in finished homes | installing new light fixtures or security wiringwiring a whole-house computer networkpatching and repairing drywalltouch-up painting | fish tape (longer runs may require 2 tapes)drywall sawutility knifepower drill and drill bitswire stripperslevelhigh-quality stud finderelectrical tape |
See the chart above to determine which tools you'll need for your wiring project.
You'll probably also need a partner to help you with some of the installation steps.
natural_image
Assorted hand tools and components laid out on a wooden surface, including a red flange, yellow tool, and metal parts (no text or symbols visible)Here are some of the tools you may need for your project: (A) electrical tape; (B) measuring tape; (C) a stud finder; (D) a utility knife; (E) a drywall saw; (F) string (for pulling wire short distances); (G) a fish tape (for pulling wire longer distances).
Safety tips
Make sure that you have a thorough understanding of local building and fire codes.
Also read and follow the safety guidelines below and those in the owner's manual.
- Be sure to use wire that meets local building and fire code. Use UL-rated wire labeled CL2 or CL3 for in-wall installations of speaker and audio/video cables, and CM, CMR, or CMP for in-wall installations of Eilex, etc.
- If installing in a house under construction, follow the safety procedures set in place by your builder, including those relating to the use and storage of extension cords and power tools. Some sites may require a hard hat or other protective clothing. Remember, you're working on a construction site, so exercise caution.
- In installing in a finished home, make sure the area behind your wall is clear before cutting (using the techniques discussed in our section on running wire through existing walls).
- If you drill through a fire block or firebreak, patch it with comparable material. If you drill holes between floors, seal them with fire-resistant caulk per National Electric Code standards.
-
When working on a ladder:
-
Place your ladder in a stable position close to where you're working. Don't reach.
○ Always have one hand on the ladder. - Face the ladder when ascending or descending.
- Don't carry heavy items up the ladder that could cause you to lose your balance and fall.
• Unplug your components before connecting the newly installed cables.
• Turn off the power in areas you'll be drilling or cutting to avoid electric shock.
Installing the unit
- Locate the area where you would like to install the unit in the wall.
(Make sure you have access to 110/220V power source) - Prepare 110/220V cable length (necessary length varies by job site)
- Prepare speaker audio cable length according to your needs (0.75mm is preferred)
- Using the included electrical box trace the area where you would like to install the unit
- Cutout the marked area using a "fine saw" (extra care should be taken in order to avoid over cutting)
- Push out the holes on the electrical box prior to installing it in the cutout area on the wall.
- Connect the power cable length to the power source
(WARNING: MAKE SURE TO DISCONNECT THE POWER MAIN BEFORE CONNECTING ANY CABLES TO THE A POWER SOURCE) - Connect the speaker audio cable length to the audio speakers and then to the audio terminal ports on the back of the unit.
- Pass the connected cables through the holes in the electrical box and then to the audio and power terminal ports on the back of the unit.
Once again we thank you for purchasing the AV-105BT In-wall Bluetooth Mulmedia Amplier. It is our hope that you enjoy this product every me it is put to use therefore, we suggest that you keep this user manual safe for future reference and so it may be passed on to the next owner.
Please feel free to visit our website www.pure-acouscs.com for more informaon on this product as well as hundreds more
Enjoy!
pure acoustics®
Brand : Pure Acoustics
Model : AV-105 BT
Category : Media player