Supreme Steam RHC670 - Iron RUSSELL HOBBS - Free user manual and instructions
Find the device manual for free Supreme Steam RHC670 RUSSELL HOBBS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Iron |
| Brand | Russell Hobbs |
| Model | Supreme Steam RHC670 |
| Dimensions (LxWxH) | Approx. 30 x 13 x 15 cm |
| Weight | Approx. 1.3 kg |
| Power Rating | 2400 W |
| Voltage | 220-240 V ~ 50-60 Hz |
| Water Tank Capacity | 350 ml |
| Soleplate Material | Ceramic or Stainless Steel |
| Steam Output (Continuous) | Up to 40 g/min |
| Steam Shot | Up to 150 g/min |
| Spray Function | Yes |
| Vertical Steaming | Yes |
| Anti-Calc System | Yes |
| Self-Clean Function | Yes |
| Auto Shut-Off | Yes |
| Cord Length | 2.5 m |
| Swivel Cord | Yes |
| Water Level Indicator | Yes |
| Care and Maintenance | Descale regularly, clean soleplate, empty tank after use. |
| Safety Features | Auto shut-off, heat-resistant handle, stable base. |
| Spare Parts / Repairability | Replacement soleplate and water tank available from Russell Hobbs service. |
| Warranty | 2 years (check manual) |
Frequently Asked Questions - Supreme Steam RHC670 RUSSELL HOBBS
How do I descale the Russell Hobbs Supreme Steam RHC670 iron?
Use the self-clean function: fill the tank with water, set the steam dial to dry, plug in and heat to maximum. Hold the iron over a sink, press and hold the self-clean button until steam and water flush out. Repeat if needed.
What type of water should I use?
Use tap water. In hard water areas, mix 50% distilled water with tap water to reduce scaling. Do not use fully distilled or chemically softened water.
Why is my iron not producing steam?
Ensure the water tank is filled above the MIN level, the steam dial is set to a steam setting, and the iron is heated sufficiently. If still no steam, perform the self-clean cycle.
Can I use the iron vertically for steaming curtains?
Yes, the Supreme Steam RHC670 has a vertical steam function. Hold the iron upright close to the fabric, press the steam shot button to release a burst of steam.
How do I clean the soleplate?
Wait until the iron has cooled. Wipe the soleplate with a damp cloth. For stubborn residue, use a non-abrasive cleaner. Never use scouring pads.
What does the auto shut-off feature do?
The iron automatically turns off if left untouched for 30 seconds on its soleplate or 8 minutes on its heel, preventing accidents.
How long does it take to heat up?
Approximately 30 seconds to reach the desired temperature, depending on the setting.
Can I use the iron without water?
No, using the iron dry without water may damage the steam function. Always ensure there is water in the tank for steam use.
Is the cord long enough for ironing boards?
Yes, the cord is 2.5 meters long and swivels for easy maneuverability around the ironing board.
Where can I find spare parts like the soleplate?
Contact Russell Hobbs customer service or visit their official website. Parts such as the soleplate, water tank, and replacement buttons are available.
User questions about Supreme Steam RHC670 RUSSELL HOBBS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual Supreme Steam RHC670 - RUSSELL HOBBS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Supreme Steam RHC670 by RUSSELL HOBBS.