Rinnai

CHS13080HiN - Water heater Rinnai - Free user manual and instructions

Find the device manual for free CHS13080HiN Rinnai in PDF.

📄 56 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Rinnai CHS13080HiN - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Tankless Gas Water Heater
Model CHS13080HiN
Brand Rinnai
Energy Source Natural Gas or Propane
Input BTU/h 130,000
Flow Rate 6.5 GPM (gallons per minute) at 35°F rise
Dimensions (H x W x D) 28.5 x 18.5 x 9.5 inches
Weight 45 lbs
Temperature Range 98°F - 140°F
Efficiency (UEF) 0.82
Venting Direct vent, PVC/CPVC
Ignition Electronic intermittent
Safety Features Freeze protection, flame failure device, overheat cutoff
Maintenance Annual descaling and filter cleaning
Warranty 12 years heat exchanger, 5 years parts, 1 year labor
Control Type Digital remote control (optional)
Certifications ANSI Z21.10.3, CSA 4.3
Noise Level < 50 dB(A)

Frequently Asked Questions - CHS13080HiN Rinnai

What type of gas does the Rinnai CHS13080HiN use?
The CHS13080HiN is designed for natural gas but can be converted to propane with a conversion kit.
Can I install this water heater outdoors?
Yes, the CHS13080HiN has a direct vent system suitable for indoor and outdoor installation, provided it is protected from direct rain and sun.
How often should I descale the unit?
Descaling is recommended annually, or more frequently in areas with hard water. Use a vinegar solution or a commercial descaling product.
What does error code 11 mean?
Error code 11 indicates ignition failure. Check gas supply, spark electrode, and flame rod. Reset the unit after troubleshooting.
Is a power supply required?
Yes, the unit requires a 120 VAC electrical connection to power the control board and ignition system. It consumes less than 2 amps.
What is the maximum temperature setting?
The maximum temperature is 140°F. For safety, a thermostatic mixing valve is recommended if setting above 120°F.
Can I use PVC for venting?
Yes, PVC or CPVC pipe rated for venting can be used. The maximum vent length depends on the pipe diameter; refer to the manual for specific lengths.
Does the unit have freeze protection?
Yes, it features an internal freeze protection system that activates the burner if the temperature drops near freezing, protecting internal components.
What is the flow rate at a 35°F rise?
At a 35°F temperature rise, the flow rate is 6.5 GPM. For a higher rise, the flow rate decreases accordingly.
Where can I find the user manual?
The user manual is available for free download from notice-facile.com or the official Rinnai website in PDF format.

User questions about CHS13080HiN Rinnai

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Water heater in PDF format for free! Find your manual CHS13080HiN - Rinnai and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CHS13080HiN by Rinnai.

USER MANUAL CHS13080HiN Rinnai

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Rinnai

Model : CHS13080HiN

Category : Water heater