SMX120 - Saw Baumr-AG - Free user manual and instructions
Find the device manual for free SMX120 Baumr-AG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Chainsaw |
| Brand | Baumr-AG |
| Model | SMX120 |
| Power Source | Petrol (Gasoline) |
| Engine Displacement | 120 cm³ |
| Bar Length | 50 cm (20 inches) |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 inch |
| Fuel Tank Capacity | 0.5 L |
| Oil Tank Capacity | 0.3 L |
| Weight (without bar and chain) | 5.5 kg |
| Overall Dimensions (L x W x H) | 900 x 250 x 300 mm |
| Idle Speed | 2800 rpm |
| Maximum Engine Power | 2.5 kW |
| Chain Brake | Yes, manual and inertia-activated |
| Anti-Vibration System | Yes, rubber buffers |
| Air Filter Type | Felt, cleanable |
| Spark Plug Type | NGK BPMR7A |
| Fuel Mix Ratio | 40:1 (petrol:2-stroke oil) |
| Chain Lubrication | Automatic, adjustable |
| Safety Features | Chain brake, throttle lockout, hand guard |
| Maintenance Interval (air filter) | Every 10 hours of use |
| Spare Parts Availability | Contact Baumr-AG customer service |
Frequently Asked Questions - SMX120 Baumr-AG
What fuel mix should I use for the SMX120 chainsaw?
Use a 40:1 ratio of unleaded petrol (95 octane) to high-quality 2-stroke oil. Mix thoroughly before filling.
How do I adjust the chain tension?
Loosen the bar nuts, turn the tensioning screw clockwise to tighten the chain (it should snap back when pulled), then retighten the nuts. Check regularly.
What bar and chain length does the SMX120 support?
The recommended bar length is 50 cm (20 inches) with a 3/8 inch pitch and 0.050 inch gauge chain. Always use compatible parts.
How do I start the chainsaw?
Set the choke to closed, press the priming bulb 6-8 times, pull the starter cord until the engine fires, then open the choke and start. Ensure the chain brake is engaged.
Why won't my chainsaw start?
Check the fuel (fresh mix), spark plug (clean/dry), air filter (clean), and that the switch is on. Also ensure the chain brake is not locked (if equipped with a lockout).
How often should I sharpen the chain?
Sharpen when you notice sawdust instead of chips, or when more pressure is needed to cut. Typically after every few hours of use, depending on wood type.
What is the correct idle speed?
The idle speed should be approximately 2800 rpm, adjusted via the idle screw. The chain should not rotate at idle.
How do I clean the air filter?
Remove the cover, take out the felt filter, tap it clean or wash with soapy water (dry thoroughly), re-oil lightly, and reinstall. Clean every 10 hours of use.
What safety gear is recommended?
Always wear protective goggles, hearing protection, gloves, chainsaw chaps, and a helmet with face shield and ear muffs. Never operate alone.
Where can I find spare parts?
Contact Baumr-AG customer service or authorized dealers. Provide model number SMX120 for correct parts. Some generic parts like chains and bars are widely available.
User questions about SMX120 Baumr-AG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual SMX120 - Baumr-AG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SMX120 by Baumr-AG.