BDWM46W - Dishwasher Bellini - Free user manual and instructions
Find the device manual for free BDWM46W Bellini in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Bellini |
| Model | BDWM46W |
| Capacity | 12 Place Settings |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 260 kWh |
| Water Consumption per Cycle | 12 Liters |
| Noise Level | 49 dB(A) |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Rapid, Glass, Pre-Rinse |
| Drying System | Condensation Drying |
| Delay Start | 1-24 Hours |
| Child Lock | Yes |
| Overflow Protection | Yes |
| Water Connection | Cold Water Only |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 2100 W |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 45 kg |
| Control Type | Electronic Push Button |
| Display | LED |
| Number of Spray Arms | 3 |
| Filtration System | Self-Cleaning Filter |
| Energy Saving Mode | Yes |
| Repair Parts Available | Spray arms, filters, door seal, detergent dispenser |
Frequently Asked Questions - BDWM46W Bellini
How do I clean the filter of the Bellini BDWM46W dishwasher?
Turn off the dishwasher and remove the lower rack. Twist the coarse filter counterclockwise and lift out. Rinse both the coarse and fine filters under running water. Reassemble in reverse order. Clean monthly for optimal performance.
Why is my Bellini BDWM46W dishwasher not drying dishes properly?
Ensure rinse aid is filled and the drying program is selected. Check if the dishwasher is overloaded or if plastic items are blocking ventilation. Also, use a higher temperature rinse cycle.
What should I do if the dishwasher shows an error code?
Refer to the user manual for specific error codes. Common codes like E1 indicate water supply issues; check the inlet hose. Reset the dishwasher by unplugging for 30 seconds.
Can I install the Bellini BDWM46W dishwasher under a countertop?
Yes, it is a freestanding model but can be installed under a countertop as long as the top panel is removed (if specified) and there is proper ventilation. Follow installation instructions.
How much salt and rinse aid should I use?
Fill the salt reservoir with dishwasher salt until it reaches the fill level (about 1 kg). Set water hardness according to manual. Add rinse aid to the dispenser until full, adjust dosage as needed.
What is the energy consumption of the Bellini BDWM46W?
The annual energy consumption is about 260 kWh per year based on standard cycles. The energy efficiency class is A+.
How do I start a delayed wash?
Press the Delay Start button repeatedly to set the desired delay (1-24 hours). Close the door and press Start. The dishwasher will begin after the set delay.
My dishwasher is leaking from the bottom. What could be the cause?
Check the door seal for debris or damage. Ensure the inlet hose connection is tight. Inspect the drain hose for cracks. The overflow system may have activated if there is too much water.
Can I use regular dish soap in the dishwasher?
No, only use dishwasher detergent. Regular dish soap creates excessive suds, causing leaks and poor wash results. Use powder, gel, or tablets designed for dishwashers.
How do I reset the Bellini BDWM46W dishwasher?
Turn off the dishwasher by pressing the power button. Unplug it or switch off at the mains for 30 seconds. Plug back in and restart. This clears minor errors.
User questions about BDWM46W Bellini
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual BDWM46W - Bellini and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDWM46W by Bellini.