WF-DT90PW - Tumble drier LG - Free user manual and instructions
Find the device manual for free WF-DT90PW LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Model | WF-DT90PW |
| Brand | LG |
| Capacity | 9 kg |
| Dimensions (W x D x H) | 600 x 600 x 850 mm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2500 W |
| Energy Efficiency Class | A++ |
| Drying System | Condenser (Heat Pump) |
| Motor Type | Inverter |
| Sensor Dry | Yes, Intelligent |
| Anti-Crease Function | Yes, up to 180 min |
| Delay Start | Up to 19 hours |
| Child Lock | Yes |
| Lint Filter Indicator | Yes |
| Condenser Cleaning Indicator | Yes |
| Control Type | Electronic with LED Display |
| Drum Material | Stainless Steel |
| Smart Connectivity | Wi-Fi, ThinQ App |
| Noise Level | 65 dB |
| Recommended Maintenance | Clean lint filter after each cycle; clean condenser monthly |
Frequently Asked Questions - WF-DT90PW LG
How do I clean the lint filter on LG WF-DT90PW?
Open the door and pull out the lint filter located inside the door seal. Remove lint by hand or with a soft brush. Rinse under water if necessary, and dry thoroughly before reinserting.
What is the maximum load capacity?
The maximum load capacity is 9 kg of dry laundry. Overloading may affect drying performance and increase energy consumption.
How do I reset the dryer if it stops during a cycle?
Press and hold the Start/Pause button for 3 seconds to cancel the cycle. Then turn the dial to select a new program or press Power to restart.
Can I install the dryer in a cupboard or small space?
The dryer requires adequate ventilation. For condenser models, ensure at least 100 mm clearance on all sides. Do not block the rear ventilation grille.
What does the 'Condenser Clean' alert mean?
This alert indicates that the heat exchanger condenser needs cleaning. Remove the lower panel, pull out the condenser unit, and rinse with water. Let it dry before reinstalling.
How do I connect the dryer to Wi-Fi?
Download the LG ThinQ app, create an account, and follow the on-screen instructions. Press and hold the Remote button on the dryer to enter pairing mode.
Why is the cycle taking longer than usual?
Possible reasons: overloaded drum, clogged lint filter, or closed room causing high humidity. The sensor automatically extends drying time to reach the desired dryness level.
What is the anti-crease function and how long does it last?
The anti-crease function gently rotates the drum for up to 180 minutes after the cycle ends to prevent wrinkles. It can be disabled in the settings.
How do I use the delay start feature?
Select your drying program, then press the Delay Start button repeatedly to set the desired delay (1-19 hours). Press Start/Pause to begin the countdown.
What should I do if the dryer fails to start?
Check that the door is fully closed, the power cord is plugged in, and the circuit breaker is on. If the display shows an error code, refer to the troubleshooting section of the manual.
User questions about WF-DT90PW LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual WF-DT90PW - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WF-DT90PW by LG.