SG50T12AQJ00 - Water heater GE - Free user manual and instructions
Find the device manual for free SG50T12AQJ00 GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | GE |
| Model | SG50T12AQJ00 |
| Capacity | 50 Gallons |
| Dimensions (H x W x D) | 50.25 x 20.25 x 20.25 inches |
| Weight | 120 lbs |
| Power Source | 240V AC, 60 Hz |
| Wattage | 4500 W (dual elements) |
| Energy Factor | 0.95 |
| Temperature Range | 90°F - 150°F |
| First Hour Rating | 56 Gallons |
| Recovery Rate | 41 GPH at 90°F rise |
| Safety Features | T&P Relief Valve, ECO (Energy Cut-Off), Manual Reset |
| Installation | Upright, Floor Mount |
| Water Connection | 3/4 inch NPT |
| Venting | Not required (electric) |
| Warranty | 6 Years Tank, 1 Year Parts |
| Certifications | UL, Energy Star |
| Maintenance | Annual flushing, anode rod inspection |
Frequently Asked Questions - SG50T12AQJ00 GE
What is the capacity of the GE SG50T12AQJ00 water heater?
The GE SG50T12AQJ00 has a 50-gallon (189 liters) capacity, suitable for households of 3-4 people.
What are the electrical requirements?
This model requires a 240V AC, 60 Hz power supply and a dedicated 30-amp circuit. It uses 4500 watts (dual heating elements).
How do I adjust the temperature?
Temperature is adjustable via the front panel. Maximum temperature is 150°F (65°C), but recommended setting is 120°F (49°C) for safety and efficiency.
Does it require a vent?
No, this is an electric water heater and does not require any venting or flue. It operates without combustion.
How often should I flush the tank?
Flush the tank annually to remove sediment buildup. This prolongs the life of the heater and maintains efficiency.
What is the warranty?
GE offers a 6-year limited warranty on the tank and 1-year on parts. Labor not included.
Can I install it outdoors?
No, this water heater is designed for indoor installation only. It must be in a dry, non-freezing location.
What safety features are included?
Includes a temperature and pressure relief valve, energy cut-off (ECO), and manual reset for overheat protection.
How do I replace the anode rod?
The anode rod should be inspected every 2-3 years and replaced if heavily corroded. It is located at the top of the tank.
What is the energy factor?
The Energy Factor (EF) is 0.95, indicating high efficiency and compliance with Energy Star standards.
User questions about SG50T12AQJ00 GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SG50T12AQJ00 - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SG50T12AQJ00 by GE.