SmartWater PG40S9B - Water heater GE - Free user manual and instructions
Find the device manual for free SmartWater PG40S9B GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Water Heater |
| Brand | GE |
| Model | SmartWater PG40S9B |
| Capacity | 40 Gallons |
| Fuel Type | Natural Gas |
| Height | 48 3/4 inches |
| Diameter | 18 inches |
| Weight (Empty) | 135 lbs |
| BTU Input | 40,000 BTU/hr |
| Recovery Rate (90°F rise) | 42.1 GPH |
| First Hour Rating | 76 Gallons |
| Uniform Energy Factor (UEF) | 0.68 |
| Vent Type | Power Vent |
| Ignition Type | Electronic (Hot Surface) |
| Anode Rod | Powered (SmartAnode) |
| Pressure Relief Valve | Included |
| Warranty | 6 Years (Tank & Parts) |
| Safety Features | Flame Lock Safety System, Temperature & Pressure Relief Valve |
| Maintenance | Annual flushing, check anode rod |
| Installation Type | Indoor, floor-mounted |
Frequently Asked Questions - SmartWater PG40S9B GE
How do I set the water temperature on the SmartWater PG40S9B?
Use the temperature control dial on the gas valve. Adjust to desired setting (typically 120°F for energy savings and safety). Refer to manual for precise instructions.
Do I need to flush the water heater regularly?
Yes, annual flushing is recommended to remove sediment buildup, which improves efficiency and extends tank life. Follow the manual's drain procedure.
What does the Flame Lock Safety System do?
It detects flammable vapor incidents and automatically shuts off the gas supply to prevent fire hazards. It must be reset by a qualified technician.
How do I know if the anode rod needs replacement?
Check annually. If the rod is less than 1/2 inch thick or covered in calcium, replace it. The SmartAnode rod may have a status light.
What is the recovery rate of this water heater?
The recovery rate is 42.1 gallons per hour at a 90°F rise, meaning it can reheat 40 gallons in about 57 minutes.
Why is my water heater making a rumbling noise?
Rumbling often indicates sediment buildup inside the tank. Flush the tank to remove sediment. If noise persists, consult a professional.
Can I install this water heater in a garage?
Yes, but it must be installed on a raised platform (18 inches above floor) and away from flammable vapors. Check local codes.
What should I do if the pilot light won't stay lit?
Check for gas supply, ensure thermocouple is clean and properly positioned. If problem continues, the gas control valve may need replacement.
How long does the warranty last?
The water heater comes with a 6-year warranty on the tank and parts. Some components may have additional coverage.
What is the recommended temperature setting for energy savings?
120°F is recommended for most households. Lower temperatures reduce energy consumption and risk of scalding. Adjust via the thermostat dial.
User questions about SmartWater PG40S9B GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SmartWater PG40S9B - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartWater PG40S9B by GE.