ORW9XA - Range hood OMEGA - Free user manual and instructions
Find the device manual for free ORW9XA OMEGA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Omega |
| Model | ORW9XA |
| Installation Type | Wall-mounted |
| Dimensions (W x D x H) | 900 mm x 500 mm x 600 mm |
| Weight | 15 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 250 W |
| Extraction Rate (Max) | 650 m³/h |
| Number of Speeds | 3 |
| Noise Level (Max) | 62 dB |
| Lighting | 2 x 1.5 W LED |
| Filter Type | Aluminum grease filter |
| Control Type | Push buttons |
| Duct Diameter | 150 mm |
| Energy Class | A |
| Recirculation Option | Yes (with optional carbon filter) |
| Maintenance | Grease filter: monthly cleaning in dishwasher or warm soapy water |
| Safety Features | Thermal cut-off, motor overload protection |
| Spare Parts Availability | Filters, LED bulbs, motor available from manufacturer |
| Reparability | Components accessible for service; repair manual available |
Frequently Asked Questions - ORW9XA OMEGA
How do I install the Omega ORW9XA range hood?
Installation should be done by a qualified professional. The hood must be securely mounted to the wall at the recommended height above the cooking surface (typically 65-75 cm for gas, 55-65 cm for electric). Ensure the ducting is properly connected for exhaust or recirculation mode.
How often should I clean the grease filter?
The aluminum grease filter should be cleaned every month or more frequently with heavy use. It can be washed in a dishwasher or by hand with warm soapy water. Allow it to dry completely before reinstalling.
Can this range hood be used in recirculation mode?
Yes, the ORW9XA can be used in recirculation mode with an optional activated carbon filter. The carbon filter absorbs odors and must be replaced every 3-6 months depending on usage.
What is the noise level of the hood?
The noise level varies by speed setting: approximately 48 dB on low speed, 56 dB on medium, and 62 dB on high speed. These values are within standard range hood levels.
How do I change the LED lights?
To replace the LED lights, first disconnect the hood from power. Remove the light cover (usually clipped or screwed) and gently pull out the LED module. Replace with a compatible LED bulb (1.5 W, GU10 or similar) and reassemble.
What should I do if the motor stops working?
Check if the power cord is plugged in and the circuit breaker hasn’t tripped. If the motor still doesn’t run, it may have overheated and tripped the thermal cut-off. Allow it to cool for 30 minutes before resetting. If the problem persists, contact customer support.
Does the ORW9XA come with a carbon filter?
The hood is supplied with an aluminum grease filter only. Activated carbon filters for recirculation mode are sold separately and must be ordered as an accessory.
What is the energy efficiency class?
The Omega ORW9XA has an energy efficiency class of A, which means it consumes relatively low energy for its extraction performance. Exact energy consumption details are in the manual.
How do I reset the filter reminder?
If your model has a filter saturation indicator, press and hold the speed button for 3 seconds until the indicator light turns off to reset it. Consult the manual for exact procedure as models may vary.
Can I install this hood over an island?
The ORW9XA is designed for wall-mounted installation only. For island installation, you would need a canopy or island-specific model. Please check the product specifications before purchasing.
User questions about ORW9XA OMEGA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ORW9XA - OMEGA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ORW9XA by OMEGA.