Zphono XRM - Hi-Fi System Parasound - Free user manual and instructions
Find the device manual for free Zphono XRM Parasound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Phono Preamplifier |
| Supported Cartridges | Moving Magnet (MM) and Moving Coil (MC) |
| Gain | 40 dB (MM) / 60 dB (MC) |
| Input Impedance | 47 kΩ (MM) / 100 Ω (MC) |
| Output Type | Balanced XLR and Single-Ended RCA |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Total Harmonic Distortion | < 0.01% |
| Signal-to-Noise Ratio | > 80 dB (MM) / > 70 dB (MC) |
| RIAA Accuracy | ±0.3 dB |
| Subsonic Filter | Yes, selectable |
| Dimensions (W x H x D) | 17.0 x 2.5 x 11.0 inches (432 x 64 x 280 mm) |
| Weight | 10.0 lbs (4.5 kg) |
| Power Supply | External 12V DC adaptor (100-240V AC input) |
| Power Consumption | < 10 Watts |
| Chassis Material | Aluminum with steel base |
| Accessories Included | Power supply, two 8-32 rack mount screws, user manual |
| Country of Manufacture | Taiwan |
| Cleaning Instructions | Wipe with dry cloth; avoid solvents |
| Safety Certifications | CE, FCC |
| Spare Parts Availability | Contact Parasound or authorized dealers |
Frequently Asked Questions - Zphono XRM Parasound
What type of cartridges does the Zphono XRM support?
The Zphono XRM supports both Moving Magnet (MM) and Moving Coil (MC) cartridges, with selectable gain and loading.
How do I connect the Zphono XRM to my amplifier?
Use the balanced XLR or single-ended RCA outputs to connect to your amplifier's corresponding inputs.
Can I use the subsonic filter?
Yes, the subsonic filter can be engaged via the rear panel switch to reduce low-frequency rumble.
How do I adjust gain for MC cartridges?
Gain settings are selected via internal jumpers or DIP switches. Refer to the manual for MM (40dB) and MC (60dB) options.
What power supply does the Zphono XRM require?
It uses an external 12V DC power supply (included) that works with 100-240V AC mains.
Is the Zphono XRM rack-mountable?
Yes, it is 1U rack-mountable with included rack mount screws.
How do I clean the Zphono XRM?
Use a soft, dry cloth to wipe the chassis. Avoid any liquids or cleaning solvents.
What is the warranty for this product?
Parasound provides a 5-year limited warranty for the original owner.
Can I use the Zphono XRM with turntables without a ground wire?
The unit has a ground terminal; connect the turntable's ground wire if available to reduce hum.
Where can I find spare parts or service?
Contact Parasound directly or an authorized service center for spare parts and repairs.
User questions about Zphono XRM Parasound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual Zphono XRM - Parasound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zphono XRM by Parasound.