Ultura 90 Resilium SR5990 - Iron SUNBEAM - Free user manual and instructions
Find the device manual for free Ultura 90 Resilium SR5990 SUNBEAM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Iron |
| Model | Ultura 90 Resilium SR5990 |
| Brand | Sunbeam |
| Power | 1800 W |
| Voltage | 120 V (60 Hz) |
| Soleplate Material | Stainless Steel with Resilium Non-Stick Coating |
| Water Tank Capacity | 400 ml |
| Steam Output | Variable up to 50 g/min |
| Shot of Steam | Yes, 150 g/min |
| Spray Function | Yes |
| Anti-Drip System | Yes |
| Self-Cleaning | Yes, with anti-calc feature |
| Automatic Shut-Off | Yes, after 8 minutes of inactivity |
| Variable Temperature Control | Yes |
| Cord Length | 3.0 m (retractable) |
| Weight | 1.5 kg |
| Dimensions (L x W x H) | 30 x 15 x 18 cm |
| Warranty | 2 years |
| Safety Features | Auto shut-off, cool-touch handle, stable heel rest |
| Maintenance | Use distilled water; clean soleplate with damp cloth; empty tank after use |
| Spare Parts | Soleplate, water tank cap, spray nozzle available from Sunbeam |
Frequently Asked Questions - Ultura 90 Resilium SR5990 SUNBEAM
How do I descale my Sunbeam Ultura 90 Resilium iron?
Fill the water tank with a mixture of equal parts water and white vinegar. Heat the iron to medium, then press and hold the self-clean button until the mixture is expelled. Repeat with plain water to rinse.
What does the auto shut-off feature do?
The iron automatically turns off after 8 minutes of inactivity (or 30 seconds when left on its soleplate) for safety.
Can I use tap water in this iron?
It is recommended to use distilled or demineralized water to prevent mineral buildup. Tap water may be used in soft water areas but frequent descaling will be needed.
How do I clean the soleplate?
Allow the iron to cool, then wipe the soleplate with a damp cloth and mild detergent. Avoid abrasive cleaners. For stubborn residue, use a proprietary soleplate cleaner.
Why is my iron leaking water?
Check that the water tank is not overfilled and that the steam control is set correctly. The anti-drip system prevents leakage at low temperatures; ensure the iron is hot enough before using steam.
How do I use the shot of steam feature?
Press the shot of steam button (usually located on the handle) for a powerful burst of steam to remove stubborn wrinkles. Ensure the iron is at a high temperature setting.
What should I do if the iron does not heat up?
Check that the power cord is properly plugged in and the temperature dial is set to a suitable fabric. If it still doesn't heat, the internal thermostat may be faulty; contact Sunbeam support.
How do I retract the cord?
Press the cord retract button (usually on the base) and guide the cord gently into the storage compartment.
Is the iron suitable for all fabrics?
Yes, the variable temperature control allows you to select the appropriate heat for different fabrics, from synthetic to linen. Always check garment care labels.
Where can I purchase spare parts?
Spare parts such as soleplates, water tank caps, and spray nozzles are available from the Sunbeam website or authorized service centers.
User questions about Ultura 90 Resilium SR5990 SUNBEAM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual Ultura 90 Resilium SR5990 - SUNBEAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ultura 90 Resilium SR5990 by SUNBEAM.